Owner's manual

28
1 Press STOP 7 (7 on the front panel).
Playback stops.
2 Press OPEN/CLOSE (0 on the front panel).
The disc tray comes out.
3 Remove the disc.
4 Press on the remote control to put the
player in standby.
The disc tray goes back in and the standby indicator
lights.
44 Press on the front panel ( on the
remote control). (Taiwanese model)
5 Press POWER on the front panel. (except
for Taiwanese model)
The player turns off.
Stopping Playback and Switching
Power Off – DVD/Video CD/CD
0
4
¢
1
¡
7
8
3
Resuming Playback from
Where You Stopped – DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP 7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVD or Video CD).
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 52).
+10
6
5
4
CLEAR
3
2
1
1 REV
FWD
¡
PLAY 3
PAUSE 8
STOP 7
e STEP/SLOW E
NEXT
¢
PREV
4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE
SUB TITLE
AUDIO
SETUP
MENU
TOP MENU
DISPLAY
¶
5
∞
3
2
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶
5
5
5
5
E
N
T
E
R
¶
¶
4, 44
1
2
CENTER SURROUND
AUDIO SUBTITLE FL
DIMMER
SUB
WOOFER
5.1CH
MODE
4 1 ¡ ¢


DVD PLAYER
3
7
8
0
Î
FL OFF5.1CH
VIRTUAL DOLBY
DIGITAL
STANDBY
VIRTUAL
DOLBY
DIGITAL
DOLBY DIGITAL/DTS DECODER
POWER
ACOUSTIC DAMPER MECHANISM
– OFF - ON
1
32
44, 5