NETWORK CACHE CHANGER DRM-6NX Operating instructions 1
IMPORTANT If the apparatus is fitted with AC mains power outlet(s), See the REAR PANEL FACILITIES for convenient connection of additional Hi-Fi component(s). Make all connections to the AC outlet(s) and the signal terminals first. Connect the plug to the wall socket last (make sure that the power switch is off.) THE APPARATUS MUST BE GROUNDED [FOR NORTH AMERICA MODELS] CAUTION CONSULT WITH THE COMPANY SALES REPRESENTATIVE. “USE ONLY UL LISTED AND CANADIAN CERTIFIED POWER SUPPLY CORD.
IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Contents IMPORTANT NOTICE [For U.S. model] RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW. THE NUMBERS ARE ON THE REAR PANEL. MODEL NO. SERIAL NO. DRM-6NX KEEP THESE NUMBERS FOR FUTURE USE. CAUTION [For U.S. Model] This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.
Features This 6-disc CD-ROM changer is a CD-ROM server equipped with a network board for easy network connection. The internal hard disk serves as cache memory for CD-ROM data which significantly reduces access times. The support of multiple protocols enables compatibility in a variety of network environments. PIONEER CD/DVD-ROM drives ( x 5 max.
Handling Precautions Installation Handling the discs Select an installation site with a flat, solid surface. ÷ Use only those discs which display the mark shown th the right. ÷ Avoid touching the signal surface when you use a disc ÷ To hold it, place your fingers on the edge of the disc or the edge of the center hole and the disc edge ÷ Do not attach paper or stickers to the label side of the disc Handle discs carefully and avoid damaging the label ÷ Discs rotate at high speed in the unit.
Handling Precautions Cleaning the magazine Clean the magazine with a soft dry cloth. If it becomes dirty, wipe th w dirt away gently with a damp, soft cloth soaked in a solution of water with a few drops of mild detergent. If there is any moisture on the unit after cleaning, dry it off with a soft, dry cloth. Let the magazine cartridge air dry thoroughly before inserting discs or placing it in the unit. Cleaning the unit To clean the panel and the cover, use a soft, dry cloth to wipe off dust and dirt.
Panel Facilities Front View NETWORK indicator POWER indicator Flashes to indicate the presence of network traffic Lights when the power is on CHANGER indicator HDD indicator Flashes to indicate hard drive and SCSI activity Lights when data is read from the internal changer and when the SCSI bus is accessed STATUS indicator Flashes during startup then goes out when the DRM-6NX is ready for use (LED remains off unless an error occurs) POWER button MAGAZINE EJECT button Press to turn the power on/off
Panel Facilities Rear View SCSI connector Ventilators Ventilation openings protect the unit from overheating thus must remain clear and uncovered A 50-pin Centronics connector for connecting external PIONEER CD/DVD-ROM drives (a total of 5 units may be connected) NOTE: ÷ Do not connect a CD-ROM or DVD-ROM drive other than a Pioneer drive to the SCSI terminal on the rear panel ÷ Do not connect this terminal to a SCSI terminal on a PC as this could cause malfunction or breakdown “SCSI CONNECTION FOR PIONEER
Connections Before making or changing the connections, switch off the power switch and disconnect the power cord from the AC outlet. SCSI cable Ethernet PIONEER CD/DVD-ROM drives NOTE: Assign SCSI IDs 2 to 6 to drives connected to the SCSI terminal. Hub RJ-45 connector 10BASE-T/ 100BASE-TX Power cable The accessory power cable is for use in North America. In other regions, please consult your dealer for information on how to purchase a power cable. To AC wall outlet Turn off SCSI terminator No.
Handling Magazines There are a few things you should know about the use of the magazine and your CD-ROM discs. Let's start with the magazine: THE MAGAZINE AND ITS FUNCTIONS The Magazine resembles a cartridge and can hold up to 6 CD-ROM discs. Two magazines are packaged with the unit but additional magazines may be purchased through your Authorized Pioneer Dealer (Six-disc Magazine DRM-A600).
Handling Magazines SUPPORTED DISC FORMAT INSERTING DISCS INTO THE MAGAZINE Physical Format The DRM-6NX changer supports 2048 Bytes/Block format only. The supported physical formats are Mode 1, Mode 2, form 1, Multi-session, and packet write (Variable). Because the Changer has a front-loading magazine slot, inserting discs is easy.
Basic Installation This section includes the basic setup procedures for getting your PIONEER Network Cache Changer DRM6NX up and running: ÷ Connecting the DRM-6NX to the network ÷ Assigning an Internet address ÷ Setting basic system parameters You must configure the DRM-6NX and set up the appropriate access restrictions for your specific network environment. Proceed to the relevant sections of the manual: ÷ pp. 18 – 19 - Microsoft & IBM Networks (SMB) ÷ pp. 20 – 24 - NetWare (NCP) ÷ pp.
Basic Installation Assigning an Internet Address The DRM-6NX supports HTTP over TCP/IP, which means that it works as a web server available to the Internet and intranets. To establish communication with the TCP/IP network, you must assign an appropriate Internet address to your DRM-6NX as an address assignment is required to access the DRM-6NX web interface. You can set the Internet address of the DRM-6NX Changer using either DHCP, ARP, RARP or BOOTP. All methods are enabled by default.
Basic Installation ÷ DNS server Internet address ÷ Domain name ÷ NTP server Internet address 2. Activate the scope. ARP in UNIX and OS/2 Follow these steps to download the Internet address and verify the communication: 1. Type the following command: In the DRM-6NX configuration file, DHCP is enabled by default. The Internet address and all the other settings will be downloaded automatically. arp -s temp 2.
Basic Installation Using BOOTP in UNIX Follow these steps to use the BOOTP method: 1. Append the following entry to your boot table (typically /etc/bootptab): :ht=:vm=:\ :ha=:ip=:\ :sm=:gw= where: ht = ether for Ethernet, tr for Token Ring vm = rfcl048 ha = The Ethernet or node address, i.e.
Basic Installation 3. Click on Administration to access Administration pages. You will be prompted to supply the Server password for the initial session. The defauit password is set to 'pass'. From the main menu you may access any of the following Administration tools: ÷ This server - To specify system settings related to a DRM-6NX, To refresh the hard disk cache.
Microsoft & IBM Networks (SMB) This section outlines the required configuration settings for running the Network Cache Changer DRM-6NX in the Microsoft and IBM (SMB) network environment, (i.e. Windows for Workgroups, Windows 95, Windows NT or OS/2). It also describes how to set up access restrictions for individuals and groups of users. SMB (Server Message Blocks) is a protocol that uses NetBIOS. NetBIOS may be transported over several different network protocols.
Microsoft & IBM Networks (SMB) Access Control In the Windows (SMB) environment, you must select whether you want to use share-level or user-level access control. Follow these steps to select the proper security level for your needs: 1. Click Network Settings 2. Click Detailed View 3. Open the Windows (SMB) page 4. Select the security mode to be used; share-level or user-level. For user-level, you must specify the name of the authentication domain to which the domain controller belongs.
NetWare (NCP) This section outlines the required configuration settings for running the Network Cache Changer DRM-6NX in the Novell NetWare environment. The section also outlines how to set up access restrictions. If you intend to use the DRM-6NX in a multi-protocol environment, proceed to the other relevant sections in this manual: ÷ pp. 18 – 19 - Microsoft and IBM Networks (SMB) ÷ pp. 25 – 26 - UNIX (NFS) ÷ pp.
NetWare (NCP) Alternative Method Follow the steps below to install the DRM-6NX as an NDS server: 1. Verify that the NDS tree is synchronized Load DSREPAIR on the server in the NDS tree and select Unattended full repair If the NDS tree is not synchronized, do not continue the installation until you have solved the problem 2. Use a standard text editor to edit the configuration parameters DRM-6NX configuration file . From Windows Explorer or File Manager, locate the DRM-6NX configuration file entitled config.
NetWare (NCP) Specific Distinguished Names Names in the Directory tree have two name types: typeful or typeless. A typeful name includes the name types (OU,O, etc.) when identifying the distinguished name of the object. A typeless name excludes the name types. You can use either syntax when specifying the parameters. Example 1 (NDSServerContext parameter syntax): Typeful distinguished name: OU=Corp.O=Acme Typeless distinguished name: Corp.
NetWare (NCP) Access Control Security Management within NetWare depends upon the selected mode: ÷ Bindery mode without user authentication ÷ Bindery mode with user authentication ÷ NDS mode The DRM-6NX acts as a typical NetWare file server, which means use standard procedures such as Filer and NWAdmin for handling security NOTE: 7 You cannot set up access restrictions for the NetWare environment via the DRM-6NX web interface.
NetWare (NCP) 5. Add the new trustee assignment to the resource. ( available to the users on the trustee list only) NOTES: 7 The NetWare bindery access rights for the DRM-6NX can be set using Group and User Objects as with any other file server. 7 You can always access the DRM-6NX using the user name Supervisor and the password specified by the Server Password parameter. By default the password is pass.
UNIX (NFS) This section outlines the required configuration settings for running the DRM-6NX in the UNIX (NFS) environment and how to set up access restrictions. NOTE: 7 Make sure you have set the Internet address as described in “Assigning an Internet Address” on page 14. If you are using the DRM-6NX in a multiprotocol environment, proceed to the other relevant sctions of the manual, namely: ÷ pp. 18 – 19 - Microsoft & IBM Networks (SMB) ÷ pp. 20 – 24 - NetWare (NCP) ÷ pp.
UNIX (NFS) Access Control File Rights 1. Click File Rights ÷ To make all of the discs available to some users only: Locate the Volumes folder in the file tree * To protect one or several resources but grant all users access to most other resources: Locate the resource you want to protect (from the file tree) 2. Click Properties 3. Open the UNIX Security page 4.
Web Browser (HTTP) This section describes how to configure the DRM-6NX for use via the web interface Network Settings The DRM-6NX supports HTTP over TCP/IP, which means that the changer works as a web server and is available on the Internet and intranets. Use the Administration pages within the PIONEER Network Cache Changer DRM-6NX web interface to configure the DRM-6NX. Refer to “Accessing the DRM6NX Web Pages” on page 16.
Web Browser (HTTP) External Link You can add a customized link on the Home Page. For example, you might want to provide a link to a page on your company’s intranet with guidelines on how to access the discs on the DRM-6NX. Follow these steps: 1. Click Network Settings 2. Click Detailed View 3. Open the Web (HTTP) page ÷ In the URL to Page field, specify the full path to the page, e.g. http://www.company.
Accessing the Network Cache Changer Resources The PIONEER Network Cache Changer DRM-6NX makes your networked CD/DVD-ROMs available to anyone who has the appropriate priviledges on the network. Users access the DRM-6NX just like any other workstation or file server. This section explains how to choose access points when mapping the DRM-6NX. It also describes how to access the DRM-6NX resources in the following network operating systems: ÷ ÷ ÷ ÷ ÷ ÷ Windows 95/98 and Windows NT 4.
Accessing the Network Cache Changer Resources Windows 95/98 and Windows NT 4.x SMB In Windows 95/98 and Windows NT 4.x on an SMB client, follow these steps to map the DRM-6NX: 1. Start the Windows Explorer 2. Expand the Network Neighborhood icon 3. Expand the Entire Network icon (The DRM-6NX lists in the first folder if it is sorted by name. If the Domain Name is already set, the changer appears in the specified folder) 8.
Accessing the Network Cache Changer Resources 4. Double click the entry for your new DRM-6NX (The default name is PIONEER_NW, where is the last six digits of the DRM-6NX serial number) 5. Enter your user name and password when prompted if you are using the bindery mode (unless you are already logged on) 6.
Accessing the Network Cache Changer Resources 4. From the bottom listing, select one of the DRM-6NX resources: ÷ Root for root level access ÷ Volumes for access to all the discs ÷ The volume name for access to an individual disc 5. Select a drive letter 6. Check Reconnect at Startup if you wish to use the resource under the same drive letter the next time you start your computer 7. Click OK (The DRM-6NX is ready for use) 6.
Accessing the Network Cache Changer Resources Windows NT 3.x OS/2 SMB IBM Peer for OS/2 For Windows NT 3.x on an SMB client, follow these steps: Verify that the IBM Peer for OS/2 installed. If it is not, see the instructions in “Alternative Method” on page 34. 1. Start the File Manager 2. From the Disk menu, select Connect Network Drive… 3.
Accessing the Network Cache Changer Resources 6. Select a drive letter for the DRM-6NX from the Local device name field 7. Click Create (The DRM-6NX is ready for use) NOTE: 7 The DRM-6NX folders will not be visible on the Desktop in OS/2 versions prior to OS/2 WARP Connect. If you wish to use an earlier version of OS/2, we recommend using third party NFS software to connect to the DRM-6NX. Alternative Method If you do not have Peer for OS/2, map the DRM-6NX to a drive letter using the net use command.
Accessing the Network Cache Changer Resources NetWare When using DOS in NetWare, issue the map command to mount the DRM-6NX. Follow these steps: 1. At the DOS prompt of a NetWare file server, type: map root :=PIONEER_NW/ : where is the last six digits of the DRM-6NX serial number and is the folder on the DRM-6NX to be mapped 2. To make the connections permanent, edit the autoexec.
Hard Disk Caching The Network Cache Changer DRN-6NX has hard disk for caching which means that discs in the Changer may be copied to a hard disk drive. The caching system involves directory caching and complete mirroring. It allows the networked discs to run at hard disk speed. 4. Click Edit on the This sever page (The Server Settings dialog box appears) 5. Open the Caching page The DRM-6NX Changer also supports hard disk caching for externally connected CD/DVD-ROM drives. See page 10.
Hard Disk Caching Management Properties To manage the hard disk caching, follow these steps: Click 1. Click Discs & Drives. This screen appears: NOTES: 7 To affect all the drives, you can perform operations in the yellow row marked ALL. However, properties and access rights may only be set for one drive or disc at a time. 7 You can click the Location or Name link to sort the items in the list by drive or volume name, respectively. The location is indicated as --.
Monitoring the Network Cache Changer This section describes: Event Log ÷ ÷ ÷ ÷ To display the event log, click Event Log within the Administration pages. Event Log Statistics E-mail SNMP In the event log, the DRM-6NX writes information such as completed tasks, warnings, installation failures, etc.
Monitoring the Network Cache Changer Statistics SNMP To display the statistics, click Statistics within the Administration pages. To specify the settings for SNMP (Simple Network Management Protocol): 1. Click Network Settings 2. Click Detailed View 3. Open the SNMP page 4.
Appendix A : Parameter List This section includes the DRM-6NX parameter list. It also explains the DRM-6NX directory structure and how to edit the configuration settings. The Configuration File The table shows the parameter list stored in the config.ini file. The middle column states the default values, where applicable. The right-hand column gives a brief description of the parameters.
Appendix A : Parameter List Parameter name Value [SMB] EnableNetBEUI EnableNBT NBTscopeID Domain/GroupName = yes = yes = = ServerName = PIONEERnnnnnn NetBEUIFrameType = auto SecurityMode AuthenticationDomain = shareLevel = [NFS] NFSEnable DefaultUid = yes = -2 PCNFSDAuthentServer = 0.0.0.0 [HTTP] HTTPEnable = yes Description Enables SMB over NetBIOS/NetBEUI. Enables SMB over NetBIOS/TCP/IP. Defines the NetBIOS scope to which the DRM-6NX belongs. Name of the DRM-6NX workgroup in SMB.
Appendix A : Parameter List Parameter name Value BindAuthentication NDSEnable NDSTreeName NDSServerContext = = yes = = NDSAdminName = NDSAdminPassword = NDSInstall = no NDSRightsStorage = NDS NDSRightsFile = TimeSyncSources = SAP Description Name of the server used for authenitcating clients. Enables NDS mode. Name of the tree where you wish to install the DRM-6NX. Distinguished name of the context in the NDS tree where you wish to install the DRM-6NX, e.g. Corp.Acme.
Appendix A : Parameter List The Volumes Folder Directory Structure The DRM-6NX will appear to your system as a file server. Like any other file server it has a directory structure where files are stored. The directory structure of the DRM-6NX is outlined below: System Root or SYS Devyce Properties Sever Properties Volume Properties Volumes Cdrom1 Cdrom2 Dvd3 .... The purpose of each folder is explained on the following pages.
Appendix A : Parameter List Editing the Configuration Parameters Web Browser If your network supports TCP/IP, you may display and edit the DRM-6NX parameter list using any standard Web browser. Note that you must first assign a valid Internet address as described in “Assigning an Internet Address” on page 14. To access the DRM-6NX Home Page from your Web browser, simply enter the URL of the DRM-6NX, (i.e.
Appendix B: Troubleshooting This section provides useful information to resolve difficulty you may experience with your DRM-6NX: ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ The front panel indicators Errors when accessing the DRM-6NX Problems running CD-ROM software Difficulties locating the DRM-6NX in NetWare Problems locating the domain controller in SMB Problems when accessing disc changers Restoring the factory default settings The others The latest information regarding this product is provided at http://wwwbsc.pioneer.co.
Appendix B: Troubleshooting Error Conditions The table shows the front panel indicators under various error conditions: Event Status LED HDD LED Network LED CD-ROM has incorrect format OFF Flash Flash* or SCSI bus not connected** Faulty network connection OFF OFF Illegal serial no.
Appendix B: Troubleshooting Difficulties Locating the Network Cache Changer in NetWare Problems Locating the Domain Controller in Windows (SMB) Frame Types - Ethernet If there is a problem locating the primary domain controller when running user-level security mode in Windows (SMB), all users will be denied access to the DRM-6NX. There are basically two different frame types on Ethernet networks, Ethernet II or IEEE 802.3. The IEEE 802.3 frame can be encapsulated in an IEEE 802.
Appendix B: Troubleshooting Problems When Accessing Disc Changers Restoring Factory Default Settings Disc changer flutter can occur if a user requests access to a CD-ROM while a second user is reading data from another CD-ROM. The changer may repeatedly switch between the two CD-ROM discs, sending small bits of data each time, in order to service both users. Because of the relatively long time needed to change a CD-ROM, the data transfer rate for both users may become unacceptably low.
Appendix B: Troubleshooting Reset Button The Others To restore the default settings using the Reset button: 1. Turn off the DRM-6NX 2. Press and hold the Reset button while you switch on the DRM-6NX (continue to press the 'Reset' button until the Network indicator flashes at regular twosecond intervals. 7 When some 100Base switching HUBs are used, Collision LEDs may light at 3-second intervals. This is normal behavior and may be ignred. 7 With some HUBs, the Link LED may not light.
Appendix C: Upgrading the Network Cache Changer This section includes the following information: ÷ Obtaining new software ÷ Upgrading the PIONEER Network Cache Changer DRM-6NX Obtaining New Software The following software for the DRM-6NX can be updated free of charge: ÷ The DRM-6NX software held in Flash Memory Over the Internet You may wish to check the PIONEER WWW Home Page http://wwwbsc.pioneer.co.jp/is/products/index.html to view/download the latest versions of the software for the DRM-6NX Changer.
Appendix C: Upgrading the Network Cache Canger Upgrading the Networ Cache Changer Upgrading the Internal Drives The DRM-6NX software can easily be upgraded over the network using FTP on a TCP/IP network. The internal disc drives can be upgraded via the DRM6NX web interface. To upgrade over the network you will need the following: Follow these steps to upgrade an internal drive: ÷ The file with the new DRM-6NX software. (the name of this file is of the form product_version.bin, e.g. cde_500.
Appendix D: Specifications Supported Systems Novell NetWare NetWare 3.11, 3.12, 4.10 and 4.11 Microsoft Windows Windows for Workgroups, Windows 95, 98, Windows NT v3.51, v4.0 Microsoft LAN Manager LAN Manager 1.3 and above IBM LAN Server LAN Server 1.3 and above TCP/IP Supports all UNIX dialects through NFS over UDP/IP on TCP/IP network WWW Internet/Intranet over HTTP 1.0 and HTML 2.0 compatible browsers Supported Protocols Novell NetWare NCP over IPX, RIP, SAP.
Appendix E: Glossary AIX Advanced Interactive eXecutive; A version of the UNIX operating system from IBM that runs on various IBM computers including Mainframe systems ARP Address Resolution Protocol; A protocol within TCP/IP networks that allows a host to find the physical address of a node on the same network BOOTP BSD Boot Protocol; A TCP/IP protocol which allows an Internet node to discover certain startup information such as its Internet address Berkeley Software Distribution; University of Calif
Appendix E: Glossary RARP RISC Reduced Instruction Set Computing; A processor that recognizes only a limited number of assembly-language instructions SAP Service Advertising Protocol; A network name advertising service that file servers may use for advertising their existence to network clients SCSI Small Computer System Interface; A high-speed parallel interface, used to connect a computer to peripheral devices using just one port SMB Server Message Blocks; A protocol that makes use of NetBIOS SNM
AFTER-SALES SERVICE FOR PIONEER PRODUCTS Please contact the dealer or distributor where you purchased the product for any / all after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the Pioneer's subsidiaries (regional service headquarters) listed below: PLEASE DO NOT SHIP YOUR PRODUCT TO THE COMPANIES at the addresses listed below as these companies are not repair locations. AMERICA PIONEER ELECTRONICS SERVICE, INC.
