Owner's Manual
Table Of Contents
- 010COV_KB045_UC(EN)_A6
- KB045_UC(A6_Vertical).EN
- Contents
- Precaution
- Parts and controls
- Basic operation
- Starting up the unit
- Using the touch panel
- Home menu screen
- ▶ Changing the home menu screen layout
- ▶ Rearranging the icons in the favorite source/application area
- ▶ Rearranging the displayed icons in the favorite source/application area
- 1 Touch and hold the favorite source/application area.
- 2 Drag unneeded icon in the favorite source/application area to the source/ application list area if the favorite source/application area is full.
- 3 Drag the icon to the desired location in the favorite source/application area.
- Favorite radio stations
- Notification
- Widget
- ▶ Switching the widgets
- Bluetooth®
- Bluetooth connection
- 1 Turn on the Bluetooth function on the device.
- 2 Display the connected Bluetooth device list screen on the device.
- 3 Touch then swipe left on the screen.
- 4 Touch then .
- 5 Touch [Connection].
- 6 Touch .
- 7 Touch in the list.
- 8 Touch [Yes] to pair with the device.
- 9 Perform the pairing operation by operating the device.
- Bluetooth settings
- Switching the connected Bluetooth device
- Hands-free phoning
- ▶ To end the call
- ▶ Registering a phone number
- ▶ Dialing from the preset dial list
- ▶ Deleting a phone number
- 1 Touch then swipe left on the screen.
- 2 Touch [Phone].
- 3 Touch .
- 4 Touch .
- 5 Touch [Yes].
- 1 Touch to answer the call.
- 1 Touch then swipe left on the screen.
- 2 Touch [Phone].
- 3 Touch .
- 1 Touch then swipe left on the screen.
- 2 Touch then .
- 3 Touch [Bluetooth Settings].
- 1 Touch or to turn private mode on or off.
- 1 Touch to switch between the three volume levels.
- ▶ General notes
- ▶ Registration and connection
- ▶ Making and receiving calls
- ▶ The received call and dialed number histories
- ▶ Phone book transfers
- Bluetooth connection
- Wi-Fi®
- Wi-Fi connection
- 1 Turn on the Wi-Fi function on the device.
- 2 Touch then swipe left on the screen.
- 3 Touch then .
- 4 Touch [Select Wi-Fi] then [Hotspot].
- 5 Touch [Wi-Fi Settings: Hotspot].
- 6 Touch [Hotspot setting].
- 7 Touch .
- 8 Touch one of the listed Wi-Fi networks on the list.
- 9 Input the network password then touch [Connect].
- Wi-Fi settings
- Access point via Wi-Fi
- Using Receiver Internet Access
- 1 Turn on the Wi-Fi and Bluetooth functions on your iPhone or smartphone.
- 2 Touch then swipe left on the screen.
- 3 Touch then .
- 4 Touch [Select Wi-Fi] then [Smartphone].
- 5 Touch [Connection].
- 6 Touch .
- 7 Touch in the list.
- 8 Touch [Yes] on the pop-up message.
- 9 Open CarAVAssist on the connected iPhone or smartphone then add this product on the top menu screen of the application.
- 10 Activate the [Receiver Internet Access] setting in the application.
- 11 Follow the message displayed on the connected iPhone or smartphone to make a Wi-Fi connection with this unit.
- Wi-Fi connection
- CarAVAssist
- Before you start
- Transferring the data
- 1 Connect your iPhone or smartphone with CarAVAssist installed on it to this product via Bluetooth (page 18).
- 2 Touch then swipe left on the screen.
- 3 Touch .
- 4 Open CarAVAssist on the connected iPhone or smartphone then touch the connection button on the top menu screen of the application.
- 5 Touch one of the transfer modes.
- Updating the firmware wirelessly
- 1 Download the firmware update files into your iPhone or smartphone through CarAVAssist.
- 2 Connect your CarAVAssist-installed iPhone or smartphone to this unit via Wi-Fi network (page 27).
- 3 Touch then swipe left on the screen.
- 4 Touch then .
- 5 Touch [System Information].
- 6 Touch [Firmware Update].
- 7 Touch [CarAVAssist].
- Source/application
- Radio
- USB
- iPhone
- Connecting your iPhone
- 1 Connect an Apple CarPlay compatible device to this product via USB.
- 2 Touch then swipe left on the screen.
- 3 Touch [Apple CarPlay] displayed in place of [USB] in the source list (page 36).
- 1 Connect an Apple CarPlay compatible device to this product wirelessly (page 57).
- 2 Touch then swipe left on the screen.
- 3 Touch [Apple CarPlay] displayed in place of [Wi-Fi Audio] in the source list (page 36).
- Basic operation
- Connecting your iPhone
- Smartphone (Android™)
- Connecting your Android device
- 1 Connect an Android Auto compatible device to this product via USB.
- 2 Touch then swipe left on the screen.
- 3 Touch [Android Auto] displayed in place of [USB] in the source list (page 36).
- 1 Connect an Android Auto compatible device to this product wirelessly (page 61).
- 2 Touch then swipe left on the screen.
- 3 Touch [Android Auto] displayed in place of [Wi-Fi Audio] in the source list (page 36).
- Basic operation
- Connecting your Android device
- WebLink™
- Apple CarPlay
- Using Apple CarPlay
- Setting the driving position
- Starting procedure
- 1 Connect an Apple CarPlay compatible device to this unit via USB.
- 2 Touch the Apple CarPlay icon.
- 1 Turn on the Wi-Fi function and the Bluetooth function on the device.
- 2 Display the Bluetooth setting menu on the device.
- 3 Touch .
- 4 Touch the Apple CarPlay icon.
- 5 Touch if the device that you want to connect does not appear.
- 6 Touch the desired device on the screen.
- 7 Touch [Yes] to pair with the device.
- 8 Perform the pairing operation by operating the device.
- Adjusting the volume
- Using the split screen
- Android Auto™
- Using Android Auto
- Setting the driving position
- Starting procedure
- 1 Connect an Android Auto compatible device to this product via USB.
- 2 Touch the Android Auto icon.
- 1 Turn on the Wi-Fi function and the Bluetooth function on the device.
- 2 Display the connected Bluetooth devices list screen on the device.
- 3 Touch .
- 4 Touch the Android Auto icon then [Yes] to display the device search screen.
- 5 Touch if the device that you want to connect does not appear.
- 6 Touch the desired device on the screen.
- 7 Touch [Yes] to pair with the device.
- 8 Perform the pairing operation by operating the device.
- Adjusting the volume
- Setting the auto-launch function
- Using the split screen
- Weather
- SiriusXM® Satellite Radio
- AUX
- External component
- iDatalink®
- Using iDatalink
- Activating iDatalink Maestro
- 1 Find the device number (12 alphanumeric characters) on the label on the packaging of this product or on the product itself.
- 2 Access the following website and follow the on-screen instructions to configure the desired firmware.
- 3 Install the vehicle/head unit-specific firmware on your iDatalink Maestro module.
- 4 Connect this product to the iDatalink Maestro and install this product to the vehicle.
- Starting procedure
- Displaying obstacle detection information
- iDatalink settings
- Metra Axxess
- Settings
- Displaying the setting screen
- System settings
- ▶ Rear view camera
- ▶ Camera for Camera View mode
- 1 Download the firmware update files into your computer.
- 2 Connect a blank (formatted) USB storage device to your computer then locate the correct update file and copy it onto the USB storage device.
- 3 Connect the USB storage device to this product (page 41).
- 4 Turn the source off (page 37).
- 5 Display the [System Settings] screen (page 84).
- 6 Touch [System Information].
- 7 Touch [Firmware Update].
- 8 Touch [USB].
- 9 Touch [Continue].
- 1 Touch [Distance] or [Speed Pulse], and then touch [Yes].
- 2 Touch [Learning status] and then touch [Reset All].
- Theme settings
- Audio settings
- 1 Touch or to select the listening position then select the output speaker.
- 2 Touch or to adjust the selected speaker output level.
- 1 Touch or to select the listening position then select the alignment speaker.
- 2 Touch or to input the distance between the selected speaker and listening position.
- *1 [All] is not available when [Network Mode] is selected as the speaker mode.
- *2 If you change the listening position setting, the set values for all speakers will change in conjunction with this setting.
- *3 To use this function, the vehicle’s acoustics must be measured in advance.
- *4 This function is available only when the listening position setting is set to [Front Left] or [Front Right].
- *5 This function is not available when adjusting the High speaker in [Network Mode].
- 1 Touch then swipe left on the screen.
- 2 Touch then .
- 3 Touch [Crossover] or [Subwoofer Settings].
- 4 Touch or to switch the speaker.
- 5 Drag the graph line to set the cutoff position.
- 6 Drag the lowest point of the graph to set the cutoff slope.
- Video settings
- Communication settings
- Favorite menu
- Other functions
- Appendix
- Troubleshooting
- Error messages
- Detailed information for playable media
- Common notes about the USB storage device
- Common notes about DivX files
- General
- MP3 compatibility
- WMA compatibility
- WAV compatibility
- AAC compatibility
- FLAC compatibility
- DSD compatibility
- DivX compatibility
- Video files compatibility
- Example of a hierarchy
- General
- Display
- Audio
- USB
- Bluetooth
- FM tuner
- AM tuner
- Wi-Fi
- GPS
- CTA2006 Specifications
- 030BCO_KB045_UC(EN)_A6
English
- 97 -
[Balance] Touch or to adjust the left/right balance.
NOTE
This function is available when [Network Mode] is selected as the
speaker mode
, or when [Standard Mode] is selected as the speaker
mode and [Subwoofer] is selected in [Rear Speaker Output].
[Time Alignment]
[On] [Off]
Listening Position*1*2
[Off] [Front Left]
[Front Right] [Front] [All]
Standard Mode*3*4
[Front Left] [Front Right]
[Rear L
eft] [Rear Right]
[Subwoofer]
Network Mode*3*4
[High Left] [High Right]
[M
id Left] [Mid Right]
[Subwoofer]
Distance
[0] to [150]
Select or customize the time alignment settings to reflect
the distanc
e between the listener’s position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1 T
ouch
or to select the listening position then
select the alignment speaker.
2 T
ouch
or to input the distance between the
selected speaker and listening position.
TIP
If you touch [TA On], the time alignment is turned off mandatorily.
NOTE
This function is available only when the listening position setting
is set t
o [Front Left] or [Front Right].
[Graphic EQ]
[Super Bass (S.Bass)]
[P
owerful] [Natural]
[Vocal] [Flat] [Custom1]
[Custom2]
Select or customize the equalizer curve.
Select a curve that you want to use as the basis of
customizing then touch the frequency that you want to
adjust.
TIPS
• I
f you make adjustments when a curve [Super Bass (S.Bass)],
[Powerful], [Natural], [Vocal] or [Flat] is selected, the equalizer
curve settings will be changed to [Custom1] mandatorily.
• I
f you make adjustments when the [Custom2] curve is selected
for example, the [Custom2] curve will be updated.
• [C
ustom1] and [Custom2] curves can be created common to all
sources.
• I
f you trail a finger across the bars of multiple equalizer bands,
the equalizer curve settings will be set to the value of the
touched point on each bar.
[Subwoofer]
[On] [Off]
Select enable or disable rear subwoofer output from this
product.
[Crossover]*5 Select a speaker unit (filter) to adjust the HPF or LPF cutoff
frequency and the slope for each speaker unit (page 98)
.
[Bass Boost]
[0] to [+6]
Adjust the bass boost level.
Menu Item Description
Pioneer MNR.book Page 97 Friday, December 16, 2022 3:25 PM