Owner's Manual
Table Of Contents
- 010COV_KB045_UC(EN)_A6
- KB045_UC(A6_Vertical).EN
- Contents
- Precaution
- Parts and controls
- Basic operation
- Starting up the unit
- Using the touch panel
- Home menu screen
- ▶ Changing the home menu screen layout
- ▶ Rearranging the icons in the favorite source/application area
- ▶ Rearranging the displayed icons in the favorite source/application area
- 1 Touch and hold the favorite source/application area.
- 2 Drag unneeded icon in the favorite source/application area to the source/ application list area if the favorite source/application area is full.
- 3 Drag the icon to the desired location in the favorite source/application area.
- Favorite radio stations
- Notification
- Widget
- ▶ Switching the widgets
- Bluetooth®
- Bluetooth connection
- 1 Turn on the Bluetooth function on the device.
- 2 Display the connected Bluetooth device list screen on the device.
- 3 Touch then swipe left on the screen.
- 4 Touch then .
- 5 Touch [Connection].
- 6 Touch .
- 7 Touch in the list.
- 8 Touch [Yes] to pair with the device.
- 9 Perform the pairing operation by operating the device.
- Bluetooth settings
- Switching the connected Bluetooth device
- Hands-free phoning
- ▶ To end the call
- ▶ Registering a phone number
- ▶ Dialing from the preset dial list
- ▶ Deleting a phone number
- 1 Touch then swipe left on the screen.
- 2 Touch [Phone].
- 3 Touch .
- 4 Touch .
- 5 Touch [Yes].
- 1 Touch to answer the call.
- 1 Touch then swipe left on the screen.
- 2 Touch [Phone].
- 3 Touch .
- 1 Touch then swipe left on the screen.
- 2 Touch then .
- 3 Touch [Bluetooth Settings].
- 1 Touch or to turn private mode on or off.
- 1 Touch to switch between the three volume levels.
- ▶ General notes
- ▶ Registration and connection
- ▶ Making and receiving calls
- ▶ The received call and dialed number histories
- ▶ Phone book transfers
- Bluetooth connection
- Wi-Fi®
- Wi-Fi connection
- 1 Turn on the Wi-Fi function on the device.
- 2 Touch then swipe left on the screen.
- 3 Touch then .
- 4 Touch [Select Wi-Fi] then [Hotspot].
- 5 Touch [Wi-Fi Settings: Hotspot].
- 6 Touch [Hotspot setting].
- 7 Touch .
- 8 Touch one of the listed Wi-Fi networks on the list.
- 9 Input the network password then touch [Connect].
- Wi-Fi settings
- Access point via Wi-Fi
- Using Receiver Internet Access
- 1 Turn on the Wi-Fi and Bluetooth functions on your iPhone or smartphone.
- 2 Touch then swipe left on the screen.
- 3 Touch then .
- 4 Touch [Select Wi-Fi] then [Smartphone].
- 5 Touch [Connection].
- 6 Touch .
- 7 Touch in the list.
- 8 Touch [Yes] on the pop-up message.
- 9 Open CarAVAssist on the connected iPhone or smartphone then add this product on the top menu screen of the application.
- 10 Activate the [Receiver Internet Access] setting in the application.
- 11 Follow the message displayed on the connected iPhone or smartphone to make a Wi-Fi connection with this unit.
- Wi-Fi connection
- CarAVAssist
- Before you start
- Transferring the data
- 1 Connect your iPhone or smartphone with CarAVAssist installed on it to this product via Bluetooth (page 18).
- 2 Touch then swipe left on the screen.
- 3 Touch .
- 4 Open CarAVAssist on the connected iPhone or smartphone then touch the connection button on the top menu screen of the application.
- 5 Touch one of the transfer modes.
- Updating the firmware wirelessly
- 1 Download the firmware update files into your iPhone or smartphone through CarAVAssist.
- 2 Connect your CarAVAssist-installed iPhone or smartphone to this unit via Wi-Fi network (page 27).
- 3 Touch then swipe left on the screen.
- 4 Touch then .
- 5 Touch [System Information].
- 6 Touch [Firmware Update].
- 7 Touch [CarAVAssist].
- Source/application
- Radio
- USB
- iPhone
- Connecting your iPhone
- 1 Connect an Apple CarPlay compatible device to this product via USB.
- 2 Touch then swipe left on the screen.
- 3 Touch [Apple CarPlay] displayed in place of [USB] in the source list (page 36).
- 1 Connect an Apple CarPlay compatible device to this product wirelessly (page 57).
- 2 Touch then swipe left on the screen.
- 3 Touch [Apple CarPlay] displayed in place of [Wi-Fi Audio] in the source list (page 36).
- Basic operation
- Connecting your iPhone
- Smartphone (Android™)
- Connecting your Android device
- 1 Connect an Android Auto compatible device to this product via USB.
- 2 Touch then swipe left on the screen.
- 3 Touch [Android Auto] displayed in place of [USB] in the source list (page 36).
- 1 Connect an Android Auto compatible device to this product wirelessly (page 61).
- 2 Touch then swipe left on the screen.
- 3 Touch [Android Auto] displayed in place of [Wi-Fi Audio] in the source list (page 36).
- Basic operation
- Connecting your Android device
- WebLink™
- Apple CarPlay
- Using Apple CarPlay
- Setting the driving position
- Starting procedure
- 1 Connect an Apple CarPlay compatible device to this unit via USB.
- 2 Touch the Apple CarPlay icon.
- 1 Turn on the Wi-Fi function and the Bluetooth function on the device.
- 2 Display the Bluetooth setting menu on the device.
- 3 Touch .
- 4 Touch the Apple CarPlay icon.
- 5 Touch if the device that you want to connect does not appear.
- 6 Touch the desired device on the screen.
- 7 Touch [Yes] to pair with the device.
- 8 Perform the pairing operation by operating the device.
- Adjusting the volume
- Using the split screen
- Android Auto™
- Using Android Auto
- Setting the driving position
- Starting procedure
- 1 Connect an Android Auto compatible device to this product via USB.
- 2 Touch the Android Auto icon.
- 1 Turn on the Wi-Fi function and the Bluetooth function on the device.
- 2 Display the connected Bluetooth devices list screen on the device.
- 3 Touch .
- 4 Touch the Android Auto icon then [Yes] to display the device search screen.
- 5 Touch if the device that you want to connect does not appear.
- 6 Touch the desired device on the screen.
- 7 Touch [Yes] to pair with the device.
- 8 Perform the pairing operation by operating the device.
- Adjusting the volume
- Setting the auto-launch function
- Using the split screen
- Weather
- SiriusXM® Satellite Radio
- AUX
- External component
- iDatalink®
- Using iDatalink
- Activating iDatalink Maestro
- 1 Find the device number (12 alphanumeric characters) on the label on the packaging of this product or on the product itself.
- 2 Access the following website and follow the on-screen instructions to configure the desired firmware.
- 3 Install the vehicle/head unit-specific firmware on your iDatalink Maestro module.
- 4 Connect this product to the iDatalink Maestro and install this product to the vehicle.
- Starting procedure
- Displaying obstacle detection information
- iDatalink settings
- Metra Axxess
- Settings
- Displaying the setting screen
- System settings
- ▶ Rear view camera
- ▶ Camera for Camera View mode
- 1 Download the firmware update files into your computer.
- 2 Connect a blank (formatted) USB storage device to your computer then locate the correct update file and copy it onto the USB storage device.
- 3 Connect the USB storage device to this product (page 41).
- 4 Turn the source off (page 37).
- 5 Display the [System Settings] screen (page 84).
- 6 Touch [System Information].
- 7 Touch [Firmware Update].
- 8 Touch [USB].
- 9 Touch [Continue].
- 1 Touch [Distance] or [Speed Pulse], and then touch [Yes].
- 2 Touch [Learning status] and then touch [Reset All].
- Theme settings
- Audio settings
- 1 Touch or to select the listening position then select the output speaker.
- 2 Touch or to adjust the selected speaker output level.
- 1 Touch or to select the listening position then select the alignment speaker.
- 2 Touch or to input the distance between the selected speaker and listening position.
- *1 [All] is not available when [Network Mode] is selected as the speaker mode.
- *2 If you change the listening position setting, the set values for all speakers will change in conjunction with this setting.
- *3 To use this function, the vehicle’s acoustics must be measured in advance.
- *4 This function is available only when the listening position setting is set to [Front Left] or [Front Right].
- *5 This function is not available when adjusting the High speaker in [Network Mode].
- 1 Touch then swipe left on the screen.
- 2 Touch then .
- 3 Touch [Crossover] or [Subwoofer Settings].
- 4 Touch or to switch the speaker.
- 5 Drag the graph line to set the cutoff position.
- 6 Drag the lowest point of the graph to set the cutoff slope.
- Video settings
- Communication settings
- Favorite menu
- Other functions
- Appendix
- Troubleshooting
- Error messages
- Detailed information for playable media
- Common notes about the USB storage device
- Common notes about DivX files
- General
- MP3 compatibility
- WMA compatibility
- WAV compatibility
- AAC compatibility
- FLAC compatibility
- DSD compatibility
- DivX compatibility
- Video files compatibility
- Example of a hierarchy
- General
- Display
- Audio
- USB
- Bluetooth
- FM tuner
- AM tuner
- Wi-Fi
- GPS
- CTA2006 Specifications
- 030BCO_KB045_UC(EN)_A6
This indicates to touch the appropriate soft key on the touch screen.
This indicates to touch and hold the appropriate soft key on the touch screen.
This indicates to swipe in the direction of the arrow on the touch screen.
This indicates to drag in the direction of the arrow on the touch screen.
- 8 -
English
Meanings of symbols used in this manual
Pioneer MNR.book Page 8 Friday, December 16, 2022 3:25 PM