Owner's Manual
Table Of Contents
- Operation Manual
- Reset the microprocessor
- Contents
- Precautions
- Parts and Controls
- Basic Operation
- Bluetooth
- AV Source
- HD Radio™ Technology
- Compressed files
- iPod®
- WebLink™
- Apple CarPlay™
- Android Auto™
- Pandora®
- Spotify®
- SiriusXM® Satellite Radio
- AUX
- AV input
- iDatalink
- Settings
- Favorite menu
- Other functions
- Appendix
- Installation Manual
- 92 -
English
[Time Alignment]
[On] [Off]
Listening Position*1*2
[Off] [Front Left] [Front
R
i
ght] [Front] [All]
Standard Mode*3*5
[Front Left] [Front Right]
[Re
ar
Left] [Rear Right]
[Subwoofer]
Network Mode*3*5
[High Left] [High Right]
[M
id
Left] [Mid Right]
[Subwoofer]
Distance
[0] to [140]
Select or customize the time alignment settings to reflect
t
h
e distance between the listener’s position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1 To
uch or
to select the listening position then
select the alignment speaker.
2 To
uch or
to input the distance between the
selected speaker and listening position.
TIP
If you touch [TA On], the time alignment is turned off mandatorily.
NOTE
This function is available only when the listening position setting
is set to [Front Left] or [Front Right].
[Auto EQ]
[On] [Off]
Set the auto-adjusted equalizer to suit the vehicle’s
acoustics. To use this function, the Auto EQ measurement
must be done in advance (page 94)
.
[A-EQ&TA Measurement] Measures and adjusts the vehicles acoustics, equalizer, and
time alignment automatically to suit the vehicle interior
(page 94)
.
[Save Settings] Save to recall the following current sound settings by
touching [OK]: slope, subwoofer phase, speaker level,
Graphic EQ, HPF/LPF, listening position, crossover, time
alignment.
TIP
When you touch [Cancel], return to the [Audio] setting screen.
[Load Settings]
[Initial Settings] [Sound
Sett
ing] [Auto EQ&TA
Setting]
Load the sound settings.
NOTES
• [Sound Setting] is available only when you have already saved
the sound settings (page 92).
• [Auto EQ&TA Setting] is available only when you have already
performed Auto EQ measurement (page 93).
[BASS Boost]
[0] to [6]
Adjust the bass boost level.
[Rear Speaker Output]
[Rear] [Subwoofer]
Select the rear speaker output.
NOTE
This function is available when [Standard Mode] is selected as the
speaker mode.
[Loudness]
[Off] [Low] [Mid] [High]
Compensates for deficiencies in the low-frequency and
high-frequency ranges at low volume.
Menu Item Description
-
-
-
-