User Manual

Procedure:
1. Connect a blank (formatted with FAT32) USB storage device to your computer, and then locate the
correct update file and copy it onto the USB storage device.
2. Connect the USB storage device to the USB port.
3. Touch [MPEG].
Tip: The update screen appears when the vehicle is stopped, and the parking brake is engaged.
If the update screen does not appear even when parked, return to step 1 and check if the update
file was copied to the root (top) folder of the USB storage device correctly.
Version up will start.
4. The progress is displayed during the updating.
DO NOT turn your unit off or eject the USB storage device while the firmware is being updated.
5. Display will show “Update succeeded” when the update is complete.