Owner's manual

DRB1558-A

Operation

2 Press the [SYNC (MASTER)] button on the deck not set as the

master for synchronization.

The [BPM] and [Beat Grid] of the track for the deck not set as the master for syn-

chronization are synchronized to the [BPM] and [Beat Grid] of the track for the deck

set to the master for synchronization.

! For information about setting the master for synchronization, see Setting the

master for synchronization on page 15.

! The beat sync function may not operate properly in the following cases.

— When the loop length is under 1 beat.

— When the [BPM] of the track for the deck set as the master for synchroni-

zation is out of the adjustable tempo range of the track for the deck to be

synchronized.

— When the track has not been analyzed.

 Setting the master for synchronization

TRAKTOR

Click [ ].

The master for synchronization can be selected from one of the two types below.

— [MASTER]: The BPM value input by the user or the BPM value set by tap-

ping is set as the master.

— [AUTO]: The master is set automatically. When two decks are playing and

the deck set as the master is paused, the other deck is automatically set as

the master.

! When using TRAKTOR SCRATCH DUO 2, this is always set to [AUTO]. If you

upgrade to TRAKTOR SCRATCH PRO 2, you can select [MASTER] or [AUTO].