DJ MIXER DJM-T1 http://www.prodjnet.com/support/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.
WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En WARNING Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region.
Contents How to read this manual ! ! The names of displays, menus, and buttons in this manual are enclosed in brackets. (e.g. [MASTER] channel, [ON/OFF], [File] menu) Descriptions of functions and procedures performed on the computer are indicated [ TRAKTOR ]. ! The TRAKTOR manual and TRAKTOR GETTING STARTED can be viewed from the TRAKTOR help menu after TRAKTOR is installed. Before start Features............................................................................................................
Features What’s in the box This unit is a 2-channel mixer optimally designed for DJ performances using the TRAKTOR SCRATCH DJ software by Native Instruments. Through a collaboration with Native Instruments, it includes the “TRAKTOR SCRATCH DUO 2” DJ software equipped with a number of features required for DJ performances. For the hardware, the unit comes with a built-in controller for operating the many functions of TRAKTOR SCRATCH without hesitation and a sound card for simple connection to a computer.
Quick Start Guide This section describes the procedure for using this unit as a DVS (Digital Vinyl System). ! Descriptions of functions and procedures performed on the computer are indicated [ TRAKTOR ]. Operation overview Installation Procedure (Windows) 1 Installing the TRAKTOR software 1 Insert the included TRAKTOR SCRATCH DUO 2 software DVD-ROM into the computer’s DVD drive. 2 Launching TRAKTOR 2 From the Windows [Start] menu, double-click the [Computer (or My Computer)] > [Traktor] icon.
The installation completed screen appears once installation is completed. Quick Start Guide 7 Select the Native Instruments hardware driver, then click [Continue]. 11 Click [Finish]. Check the check box for your hardware. This completes the installation procedure. 8 Installation Procedure (Macintosh) To choose the normal place of installation, simply click [Install]. To install in a different location, click [Change Install Location...], choose the place of installation, then click [Install].
! 2 This dialog is displayed each time TRAKTOR is launched until the license is acquired from SERVICE CENTER. Select the method for acquiring the license, then click. — [Run Demo]: Launch TRAKTOR in the demo mode. — [Buy]: Purchase TRAKTOR from the Native Instruments online shop. — [Activate]: Acquire the license immediately from the SERVICE CENTER. To launch from the TRAKTOR [Help] menu With this procedure, a second computer that can be connected to the Internet is required.
YOUR FOLLOWING THESE TERMS. WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT OR UNINSTALL IT, AS APPLICABLE. Definitions 1 “Documentation” means written documentation, specifications and help content made generally available by Pioneer to aid in installing and using the Program.
Connecting the input/output terminals Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord. Refer to the operating instructions for the component to be connected. ! When creating a DVS (Digital Vinyl System) combining a computer, audio interface, etc.
Setting this unit Playing tracks Be sure to install this unit’s exclusive driver software before connecting this unit and the a computer by USB cable. 1 Switch the [CD, PHONO, USB] input selector switch. Set it to [USB]. 2 Set the CONTROL CD in the DJ player. To use an analog player, set the CONTROL VINYL. Set TRAKTOR to the [Scratch Control] mode. TRAKTOR CD 2 PHONO USB Connect this unit to your computer via a USB cable. This unit functions as an audio device conforming to the ASIO standards.
Operation 2 1 2 3 POWER MIDI 7 LOAD DUPLICATE A B UTILITY ON/ OFF CH1 LOAD DUPLICATE CH2 DECK A MASTER DECK B 0 WAKE UP CUE REL. 6 ABS. BOOTH MONITOR CUE PUSH BROWSE TREE VIEW FLD OPEN REL. 3 ABS.
Browse section (SHIFT)+2 LOAD DUPLICATE LOAD DUPLICATE 1 A B 2 DECK A DECK B ABS. VIEW FLD OPEN 1 REL. PUSH BROWSE TREE 2 (Press) 3 Operation REL. CUE 2 CUE ABS. 1 2 1 LOAD (DUPLICATE) button ! ! Press: The track selected with the cursor is loaded in the respective deck. [SHIFT] + press: The track loaded in the one deck is copied and loaded into the other deck. 2 Rotary selector ! Turn: The cursor in the [TRACK] area moves.
Transport section DECK A 1 CUE REL. ABS. DECK B 2 BROWSE TREE 4 1 VIEW FLD OPEN 4 SYNC SYNC MASTER MASTER CUE PUSH REL. FX ASSIGN 3 FX1 FX2 BEND 2 ABS. FX ASSIGN FX1 FX2 3 BEND Internal Playback mode 4 1 2 (SHIFT)+4 Scratch Control mode (SHIFT)+3 1 f (REL.) button ! ! (SHIFT)+1 3 Press: Use this to play/pause tracks. [SHIFT] + press: The TRAKTOR playback tracking mode switches to the Relative mode.
2 Press the [SYNC (MASTER)] button on the deck not set as the master for synchronization. Operation The [BPM] and [Beat Grid] of the track for the deck not set as the master for synchronization are synchronized to the [BPM] and [Beat Grid] of the track for the deck set to the master for synchronization. ! For information about setting the master for synchronization, see Setting the master for synchronization on page 15. ! The beat sync function may not operate properly in the following cases.
Mixer section 1 3 CD PHONO MASTER USB 2 OVER OVER 9 9 5 5 3 3 TRIM 4 9 6 1 0 -1 -1 -3 9 HI 1 0 a -6 -9 - 15 - 15 - 24 dB - 24 dB HEADPHONES MID PHONO USB MIXING 1 1 TRIM 6 HI 2 0 6 MID 3 5 CUE LOW 2 9 9 b 5 0 BOOTH MONITOR 4 -3 -6 -9 MASTER 3 CD 6 MASTER D LOW LEVEL c 6 6 CUE SHIFT TAP LOCK SAMPLE LEVEL 6 0 AU 6 CUE CRO TAP SAMP DE 7 10 10 9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1 0 7 0 2 CHANNEL TRAKTOR MIXER CH
2 Press the [CUE (TAP)] button for the channel you want to monitor. 3 Turn the [HEADPHONES MIXING] control. Adjusts the monitor volume balance between the sound of the channel whose [CUE (TAP)] button is pressed and the [MASTER] channel sound. ! To monitor only the sound of the [MASTER] channel, turn the [HEADPHONES MIXING] control clockwise from the center position. Turn the [HEADPHONES LEVEL] control.
Effect section 4 Group mode FX1 DRY/ WET 1 3 ON GROUP / SINGLE 1 3 1 (SHIFT)+2 (SHIFT)+4 2 (SHIFT)+2 (SHIFT)+3 2 LFO FX SELECT 2 2 2 Single mode 4 LFO 3 3 LFO 3 1 ON (GROUP/SINGLE) button 1 4 4 Effect control dials When using in the [Group] mode ! Press: Does not function. ! [SHIFT] + press: Switches the effect panel mode. [Group] mode h [Single] mode When using in the [Single] mode ! Press: Turns the effect on and off. ! [SHIFT] + press: Switches the effect panel mode.
! The following section describes the procedure for operating the LFO CONTROL function in the [Group] mode. 1 Turn an effect control dial while pressing the [SHIFT] button. This selects the type of effect. 2 Press an effect control button while pressing the [SHIFT] button. 3 Operation The LFO CONTROL function turns on. If the effect is off, it turns on simultaneously. ! When the same button is pressed again, the LFO CONTROL function turns off and the effect turns back on.
Hot cue/sampler section HOT CUE mode DECK A /C 1 LOOP MOVE AUTO LOOP 2 SAMPLE LEVEL SELECT CROSS.F. CONTROL 3 HOT CUE SAMPLER DEL DEL 1 2 4 4 1 5 SAMPLER mode 3 (SHIFT)+1 4 (SHIFT)+5 5 ACTIVE PLAY MODE 4 1 AUTO LOOP (LOOP MOVE/SAMPLE VOLUME) control When using with the hot cue function ! Turn: Changes the loop size. ! Press: Turns loop playback on and off. ! [SHIFT] + turn: Moves the position of the loop. ! [SHIFT] + press: Does not function.
Switches to the mode in which the [SELECT] indicator, [HOT CUE/SAMPLER] button and [ACTIVE] button light orange. 3 Press the [HOT CUE/SAMPLER] button. 4 ! 1 Press the [ACTIVE] button while pressing the [SHIFT] button. 2 The sample’s loop mode switches. ] Loop play mode: — [ When the end of the sample is reached, sample playback returns to the beginning and continues. — [ ] One shot play mode: When the end of the sample is reached, sample playback stops.
Global section MIDI section MIDI 1 SNAP QUANTIZE ON / OFF CH1 CH2 1 This unit outputs the operation information of buttons and controls in universal MIDI format. When connected by USB cable to a computer on which a MIDI-compatible DJ software program is installed, the DJ software can be operated from this unit. 1 (SHIFT)+1 Operating DJ software using the MIDI function 1 SNAP (QUANTIZE) button ! ! Press: Turns the TRAKTOR snap function on and off.
Changing the settings Changing the TRAKTOR Preferences 1 Click the TRAKTOR [ (Preferences Button)] button. Open the TRAKTOR settings menu. 2 Select the category and make the settings. Updating the TRAKTOR software When the computer is connected to the Internet, TRAKTOR software can be updated by accessing the Native Instruments SERVICE CENTER (referred to simply as “SERVICE CENTER” below). 1 Launch the SERVICE CENTER and log in.
Setting the source of audio data output from this unit to the computer Adjusting the buffer size (when using Windows ASIO) Display the setting utility before starting. If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size. Display the setting utility before starting. 1 Click the [MIXER OUTPUT] tab. Click the [ASIO] tab. 2 Click the [Mixer Audio Output] pull-down menu.
Changing this unit’s settings 1 Press the [UTILITY (WAKE UP)] button for over 1 second. About the auto standby function The [UTILITY (WAKE UP)] indicator and the top of the [CH 1] channel level indicator flash. 2 The setting item changes each time the [LOAD (DUPLICATE) B] button is pressed. The flashing position of the [CH 1] channel level indicator moves downwards. ! When the [LOAD (DUPLICATE) A] button is pressed, the selection returns to the previous setting item.
List of MIDI Messages List of MIDI Messages Category SW Name Effect section 26 MIDI message (this unit to computer) SHIFT OFF MIDI message (computer to this unit) SHIFT ON SHIFT OFF Notes SHIFT ON BTN 9n 00 dd 9n 40 dd — — — — — — OFF=0, ON=127 VR Bn 00 dd Bn 40 dd — — — — — — Turn clockwise: 0 – +30 / Turn counterclockwise: -1 – -30 DECK A LOAD (DUPLICATE) button BTN 9n 01 dd 9n 41 dd — — — — — — OFF=0, ON=127 DECK B LOAD (DUPLICATE) button BTN 9n 02
Category SW Name DECK A AUTO LOOP (LOOP MOVE/SAMPLE VOLUME) control Hot cue/sampler section MIDI message (computer to this unit) SHIFT ON SHIFT OFF Notes SHIFT ON BTN 9n 15 dd 9n 55 dd — — — — — — OFF=0, ON=1271 VR Bn 09 dd Bn 49 dd — — — — — — Turn clockwise: 0 – +30 / Turn counterclockwise: -1 – -301 BTN 9n 16 dd 9n 56 dd — — — — — — OFF=0, ON=1272 VR Bn 0A dd Bn 4A dd — — — — — — Turn clockwise: 0 – +30 / Turn counterclockwise: -1 – -302 BT
Additional information Troubleshooting ! ! Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Check Remedy [SINGLE/GROUP] selector button does not work. — The [Single] mode cannot be selected with TRAKTOR SCRATCH DUO 2. If you upgrade to TRAKTOR SCRATCH PRO 2, the effect panel can be switched to the [Single] mode. Back cue function does not work. Is a cue point set? Set a cue point. (page 14) MIDI control does not work. Is the MIDI channel properly set? Set the MIDI channel from the [MIDI] tab in the settings utility.
Specifications General Power requirements................................................................................. AC 120 V, 60 Hz Power consumption....................................................................................................23 W Power consumption (standby)..................................................................................0.4 W Main unit weight......................................................................................... 6.1 kg (13.5 lb) Max.
Pioneer Electronics(USA) Inc. Limited Warranty WARRANTY PERIOD For the period specified below from the date of original purchase (the warranty period), Pioneer Electronics(USA) Inc.
To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.com In Canada/Aux Canada http://www.pioneerelectronics.
