English CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS Français Owner’s Manual Mode d’emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. Important (Numéro de série) Le numéro de série se trouve au bas de cet appareil. Pour votre sécurité et votre commodité, veillez à noter ce numéro sur la carte de garantie fournie.
Table of Contents Before You Start ....................................................................................... 4 Getting Started ........................................................................................ 6 CD/USB/iPhone/AUX............................................................................ 13 Bluetooth ............................................................................................... 16 App Mode .................................................................
• When an iPhone is connected to the unit, the source name on the unit appears as [iPod]. Please note that this unit supports only iPhones (iPhone 5 or later) regardless of the source name (for details, refer to page 57).
Before You Start FCC ID: EW4C95 MODEL NO.: DEH-S6000BS/DEH-S6010BS IC: 4250A-C95 This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
WARNING • Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards. • Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the device.
U.S.A. and CANADA Pioneer Electronics (USA) Inc. CUSTOMER SUPPORT DIVISION P.O. Box 1760 Long Beach, CA 90801-1760 800-421-1404 Getting Started Basic operation DEH-S6000BS/S6010BS M.C. (multi-control) dial Disc loading slot Display window SRC (source)/OFF BAND/ DISP (display) USB port (eject) Detach button AUX input jack (3.5 mm stereo jack) -6- English For warranty information please see the Limited Warranty sheet included with this unit.
Remote Control VOLUME +/– MUTE / English SRC (source) DISP (display) Frequently used operations The available buttons vary depending on the unit. Operation Purpose Head Unit Remote Control Turn on the power* Press SRC/OFF to turn on the power. Press and hold SRC/OFF to turn off the power. Press SRC to turn on the power. Press and hold SRC to turn off the power. Adjust the volume Turn the M.C. dial. Press VOLUME + or –. Press MUTE to mute the unit.
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off. Display indication Indication Description Appears when a Bluetooth telephone is connected to this unit by HFP (Hands Free Profile) (page 16) and flashes while the telephone is on hold.
Resetting the microprocessor The microprocessor must be reset in the following situations: – Before using this unit for the first time after installation – If the unit fails to operate properly – When strange or incorrect messages appear on the display Remove the front panel (page 8). Press the RESET button with a pointed instrument longer than 8 mm. RESET button Preparing the remote control Remove the insulation sheet before use.
If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. • Do not expose the battery or remote control to excessive heat such as direct sunlight or fire. CAUTION Important • Do not store the remote control in high temperatures or direct sunlight.
Description SPEAKER MODE Switch between two operation modes: the 2-way network mode (NETWORK) and the standard mode (STANDARD) according to the connections you have established. For details on operation modes, see page 31. After selecting the appropriate mode, turn the M.C. dial to select [YES], then press to confirm. • You cannot complete the setup menu without setting the [SPEAKER MODE].
NOTE The options vary depending on the unit. Menu Item Description REAR-SP Select when there is a full-range speaker connected to the rear speaker output leads. [FUL] Select when there is a subwoofer connected directly to the rear speaker output leads without any auxiliary amplifier. SYSTEM UPDATE Select [SYSTEM INFO] to confirm the latest system information [SYSTEM INFO], [S/ on the unit. Select [S/W UPDATE] to update the unit to the latest software W UPDATE] and initialize the unit settings.
1 2 3 After selecting the band, press the M.C. dial to display the main menu. Turn the M.C. dial to select [FUNCTION], then press to confirm. Turn the M.C. dial to select [BSM], then press to confirm. / to select a station. Press and hold / then release to seek an available station. Scanning stops when the unit receives a station. To cancel seek tuning, press / . NOTE [SEEK] needs to be set to [MAN] in the FUNCTION settings (page 33).
NOTE To automatically switch to [USB] source when a USB device/iPhone is connected to the unit, set [USB AUTO] to [ON] in the SYSTEM settings (page 39). CAUTION Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous. English Before removing the device, stop playback. AOA connections For details on AOA connection, see page 30. MTP connection A device installed with Android OS 4.
Operation Search for a file from a list (CD/USB only) 1 Press to display the list. 2 Turn the M.C. dial to select the desired file (folder) name or category, then press to confirm. 3 Turn the M.C. dial to select the desired file, then press to confirm. Playback starts. View a list of the files in the selected folder/ Press the M.C. dial when a folder/category category*1 is selected. Play a song in the selected folder/ category*1 Press and hold the M.C. dial when a folder/ category is selected.
Bluetooth Bluetooth connection 1 2 3 4 5 6 7 Turn on the Bluetooth function of the device. If you make a Bluetooth connection from the device, proceed to step 6. Press to display the phone menu. Turn the M.C. dial to select [BT SETTING], then press to confirm. Turn the M.C. dial to select [ADD DEVICE], then press to confirm. The unit starts to search for available devices, then displays them in the device list. • To cancel searching, press the M.C. dial.
Bluetooth settings Description Display the list of paired Bluetooth devices. “*” appears on the device name when the Bluetooth connection is established. When no device is selected in the device list, this function is not available. DEL DEVICE Delete the device information. [DELETE YES], [DELETE NO] ADD DEVICE Register a new device. If ten devices are already paired, this function is not available. You can check the number of paired devices on the [DEVICELIST] setting. A.
Bluetooth telephone First, make a Bluetooth connection with the Bluetooth telephone (page 16). Up to two Bluetooth telephones can be connected simultaneously. Important To make a phone call 1 Press to display the phone menu. 2 3 4 When two phones are connected, a phone name appears first then a phone menu will display. To switch to another phone, press again. Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to confirm. If you select [PHONE BOOK], proceed to step 4. Turn the M.C.
Purpose Operation Turn the private mode on or off Press BAND/ during the call. English To preset phone numbers 1 Select a phone number from a phone book or call history. 2 Press and hold one of the number buttons (1/ to 6/ ). The contact is stored in the selected preset number. To make a call using a preset number, press one of the number buttons (1/ then press the M.C. dial.
Menu Item Description PB INVT Invert the order of names in the phone book (name view). BT SETTING You can adjust various settings for Bluetooth connections. For details on Bluetooth settings, see page 17. Bluetooth audio Important • Depending on the Bluetooth audio player connected to this unit, the available operations will be limited to the following two levels: – A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
Purpose Operation Switch the Bluetooth device name in the device list according to the connection order Press 1/ or 2/ . * Depending on the connected device, these operations may not be available. English App Mode You can enjoy listening to an application on an iPhone/Android device via the unit. In some cases, you can control an application by using the unit. For details on compatible devices, visit our website.
5 6 Turn the M.C. dial to select one of the below, then press to confirm. • Select [IPHONE] for iPhone. • Select [ANDROID] for Android device. NOTE 7 8 When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C. dial to select [SRC OFF :YES], then press to confirm. The unit turns off automatically and the setting is executed. Press SRC/OFF to select [APP].
• iPhone via USB (page 13) • iPhone/Android device via Bluetooth (page 16) If you choose a USB connection, proceed to step 6. 5 Press SRC/OFF to select [PANDORA]. Press and hold 1/ to display [PHONE CONNECT]. Turn the M.C. dial to select one of the below, then press to confirm. • Select [IPHONE] for iPhone. • Select [ANDROID] for Android device. Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via Bluetooth.
Purpose Operation Delete a station 1 When the station is selected, press and hold the M.C. dial. [DELETE YES] appears. 2 Press the M.C. dial. To cancel, press BAND/ in step 1. English Pause/resume playback Press 4/PAUSE. Thumbs Up Press 1/ . Thumbs Down Press 2/ . Create a new station based on the track currently being played Press and hold 5/ . Create a new station based on the artist currently being played Press and hold 6/ . Store the track information currently 1 Press and hold 3/MIX.
1 5 Press SRC/OFF to select [SPOTIFY]. Press and hold 1/ to display [PHONE CONNECT]. Turn the M.C. dial to select one of the below, then press to confirm. • Select [IPHONE] for iPhone. • Select [ANDROID] for Android device. Turn the M.C. dial to select [BLUETOOTH] for iPhone/Android device via Bluetooth. NOTE 6 7 When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Press the M.C. dial and turn the M.C.
Operation Thumbs Up (Only for radio) Press 1/ . Thumbs Down (Only for radio) Press 2/ . Random play (Only for track/album/artist/ playlist) Press 5/ . Repeat play (Only for track/album/artist/ playlist) Press 6/ . Start a radio channel based on the song currently being played. 1 Press and hold 5/ to start a radio. 2 Press the M.C. dial. • This function may not be available depending on the selected song. NOTE Some functions of Spotify may not be operated from the unit.
TuneMix™ Create a music channel that’s a blend of songs made up from the music channels stored on the current band of presets. For details, refer to TUNEMIX on page 34. NOTE TuneMix™ is compatible with the SXV300 or later tuner models. Not compatible with the SXV200 or SXV100. 1 2 Press SRC/OFF to select [SIRIUSXM]. Press / to select Channel 0. The Radio ID appears on the display. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner.
Pressing and holding either button will rapidly browse through the channels. Press and hold either button then release to tune automatically. Scanning stops when the unit receives a channel. To cancel seek tuning, press / . NOTE You can exit the replay mode by pressing and holding BAND/ . Purpose Operation Select a channel 1 Set the operation mode to [CHANNEL]. 2 Press or . Pressing and holding either button will rapidly browse through the channels.
Purpose Operation Switching to the next/previous song during Press TuneScan or . Switching to the next/previous channel during the category scan Press or . Aborting a scan (The last channel or song will continue to play when scan ends.) Press BAND/ English . Channel Preset To preset a channel 1 While receiving a channel you want to store, press and hold one of the number buttons (1/ to 6/ ) until it stops flashing.
WARNING Do not attempt to operate the application while driving. Make sure to pull off the road and park your vehicle in a safe location before attempting to use the controls on the application. For Android device users This function is compatible with devices that have Android OS 4.1 or later installed and also support AOA (Android Open Accessory) 2.0. You can download Pioneer ARC APP on Google Play. NOTE Some Android devices connected via AOA 2.
When you select the USB connection, Pioneer ARC APP on the Android device starts automatically if [ON] is selected in [P.APP AUTO ON] (page 39). NOTE Press SRC/OFF to select any source. Launch Pioneer ARC APP on the mobile device via USB connection. Press and hold M.C. dial via Bluetooth connection. NOTE When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection).
Standard mode You can create a 4-speaker system with front and rear speakers or front speakers and subwoofers, or a 6-speaker system with front and rear speakers and subwoofers. You can adjust the cut-off frequency value and the slope value of each speaker. The following speakers can be adjusted.
Standard mode: [–6] to [–24] (if you choose [FRONT] or [REAR]) [–6] to [–36] (if you choose [SUBWOOFER]) You can adjust various settings in the main menu. 1 2 3 Press the M.C. dial to display the main menu. Turn the M.C. dial to select one of the categories below, then press to confirm. • FUNCTION settings (page 33) • AUDIO settings (page 36) • SYSTEM settings (page 38) • ILLUMINATION settings (page 41) • MIXTRAX settings (page 42) Turn the M.C. dial to select the options, then press to confirm.
Menu Item SEL DEVICE Description iPod Connect a Bluetooth device in the list. S.RTRV USB iPod AUX BOOKMARK Store the track information currently being played in your Pandora account. NEW STATION [FROM TRACK], [FROM ARTIST] Create a new station based on the track or artist currently being played. PAUSE Pause or resume playback. PLAY Start playback. STOP Stop playback. SiriusXM settings Menu Item Description PAUSE Pause or resume playback.
Menu Item Description TUNE SCAN Scan through songs from your music channel presets. TUNE START Start playback of the broadcast from the beginning of a song when tuning to a preset music channel. PARENTAL CTRL [LOCKED CH], [CLEAR ALL], [EDIT CODE] Input the current passcode on the [PASSCODE] screen (the default passcode is 0000). 1 Turn the M.C. dial to select a number. 2 Press the M.C. dial to move the cursor to the next position. 3 After inputting the passcode, press the M.C. dial. 4 Turn the M.C.
AUDIO settings Menu Item Description EQ SETTING FADER*1 (Only for standard mode) Adjust the front and rear speaker balance. BALANCE Adjust the left and right speaker balance. SUBWOOFER [ON], [OFF] Set to [ON] when using a subwoofer speaker. SUBWOOFER*2 [NOR], [REV] Select the subwoofer phase. SPEAKER LEVEL Network mode: [HIGH L], [HIGH Select a speaker unit (filter) and adjust the R], [MID L], [MID R], [SUBWOOFER] output level.
Menu Item Description TIME ALGNMNT [INITIAL], [OFF], [CUSTOM] SAVE SETTINGS [YES], [NO] Save to later recall the following sound settings at their current values: [CROSSOVER], [SPEAKER LEVEL], [EQ SETTING], [POSITION], [TIME ALGNMNT], [D.BASS], [SUBWOOFER]. LOAD SETTINGS Load the sound settings, when you have already performed [SAVE SETTINGS]. D.BASS [OFF], [LOW], [HI] Boost the bass level dynamically to offer an effect as if a subwoofer was added to the system.
SYSTEM settings You can also access to these menus when the unit is turned off. Menu Item Description LANGUAGE Select the language to display the text information from a compressed audio file. CLOCK SET Set the clock (page 10). 12H/24H [12H], [24H] Select the time notation. BEEP TONE (Only for standard mode) [ON], [OFF] A beep can be heard when any button is pushed. Select [OFF] to disable this function. INFO DISPLAY [SOURCE/BTINFO], [SOURCE/ Display the item on the sub information display.
Menu Item Description PHONE CONNECT [IPHONE], [ANDROID], [OTHERS] P.APP AUTO ON Select [ON] to automatically launch Pioneer ARC APP when an Android device is connected to the unit via AOA. (Only available when [APP CONTROL] is selected in [PHONE CONNECT].) [ON], [OFF] USB AUTO [ON], [OFF] Select [ON] to automatically switch to [USB] source when a USB device/iPhone is connected to the unit. Select [OFF] when a USB device/iPhone is being connected to the unit just for charging.
Setting Value Device Connection method Available source(s) [APP CONTROL](AOA) (When [ANDROID] is selected) iOS USB Android USB Bluetooth - iOS USB - Bluetooth Android ANDROID (AOA) Bluetooth iPod, PANDORA, APP, SPOTIFY USB USB MTP Bluetooth PANDORA, APP, SPOTIFY When Pioneer ARC APP connection is performed Setting Value Device Connection method Available source(s) [WIRED] (When [IPHONE] or [OTHERS] is selected) iOS USB Android USB iOS USB Android USB iOS USB Android USB
Setting Value Device Connection method Available source(s) [BLUETOOTH] iOS USB Android iPod, PANDORA, SPOTIFY USB USB MTP Bluetooth PANDORA, ANDROID (Android Music), SPOTIFY ILLUMINATION settings Menu Item Description COLOR [KEY COLOR], [DISP COLOR], [BOTH COLOR] Select color for the keys/display of the unit from 12 preset colors, [SCAN] or [CUSTOM]*. • [SCAN]: Cycle through a variety of colors automatically. • [CUSTOM]*: 1 Press and hold the M.C. dial until the color setting display appears.
Menu Item Description PHONE COLOR Select the key color when a call is received. Applies the color set by [KEY COLOR]. [FLASH FX1] to [FLASH FX6] Cycle through a variety of colors automatically. [OFF] No change in key color made. ILLUMI FX [ON], [OFF] The illumination effect can be seen when: – there is an incoming call – you are on a phone call – a CD is inserted/ejected The illumination effect will activate when the ACC power is turned on/off regardless of this setting.
Menu Item Description DISPLAY FX [ON], [OFF] Set the MIXTRAX special effects on/off. CUT IN FX [ON], [OFF] - 43 - English Turn the MIXTRAX sound effects on/off while manually changing the tracks.
Connections/Installation Connections Ground wire English In the following, "NW" represents network mode and "STD" represents standard mode. According to the connections you have established, change the speaker mode to standard mode (STD) or network mode (NW) (page 11). POWER AMP WARNING • When speaker output is used by 4 channels, use speakers over 50 W (maximum input power) and between 4 Ω to 8 Ω (impedance value). Do not use 1 Ω to 3 Ω speakers for this unit.
SiriusXM Connect Vehicle Tuner input Power cord input Microphone input Rear output (STD) or middle range output (NW) Front output (STD) or high range output (NW) Antenna input Fuse (10 A) Wired remote input Hard-wired remote control adapter can be connected (sold separately). Subwoofer output SiriusXM Connect Vehicle Tuner (sold separately) Power cord Perform these connections when not connecting a rear speaker or middle range speaker lead to a subwoofer.
Important In the case of above, two 4 Ω subwoofers wired in parallel will represent a 2 Ω load. Power amp (sold separately) Perform these connections when using the optional amplifier. To power cord input Left Right Front speaker (STD) or high range speaker (NW) Rear speaker (STD) or middle range speaker (NW) White White/black Gray Gray/black Green Green/black Violet Violet/black Black (chassis ground) Connect to a clean, paint-free metal location. Yellow Connect to the constant 12 V supply terminal.
Installation Leave ample space Dashboard Mounting sleeve • Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions. When not using the supplied mounting sleeve 1 Determine the appropriate position where the holes on the bracket and the side of the unit match. 2 Tighten two screws on each side.
recommended to use the clamps (sold separately) to arrange the lead. 3 To install on the sun visor 1 Fit the microphone lead into the groove. Microphone lead Groove 2 To secure the front panel Install the microphone clip on the sun visor. Lowering the sun visor reduces the voice recognition rate. The front panel can be secured with the supplied screw. Screw Installing the microphone The microphone should be placed directly in front of the driver at a suitable distance to pick up their voice clearly.
Double-sided tape - 49 - English 2 Microphone Microphone clip Microphone base Install the microphone on the rear side of the steering column.
Additional Information – Make a Bluetooth connection between the unit and the cellular phone again. Troubleshooting Error messages Common The repeat play range changes unexpectedly. → Depending on the repeat play range, the selected range may change when another folder or track is being selected or during fast forwarding/reversing. – Select the repeat play range again. A subfolder is not played back. → Subfolders cannot be played when [FLD] (folder repeat) is selected. – Select another repeat play range.
FORMAT READ → Sometimes there is a delay between the start of playback and when you start to hear any sound. – Wait until the message disappears and you hear sound. HUB ERROR → The USB device connected via a USB hub is not supported by this unit. – Connect the USB device directly to this unit using a USB cable. SKIPPED → The inserted disc contains DRM protected files. – The protected files are skipped. PROTECT → All the files on the inserted disc are embedded with DRM. – Replace the disc.
Pandora displayed, reconnect the iPhone and reset it. ERROR-23 → USB device was not formatted properly. – Format the USB device with FAT12, FAT16 or FAT32. STOP → There are no songs in the current list. – Select a list that contains songs. NOT FOUND → The Pandora application has not started running yet. – Start up the Pandora application. RATING ERROR → The thumb rating operation was disabled. – Run the same command for another track. CAN'T SKIP → The skip operation was disabled.
– Connect a device that has a compatible version of the Pandora application installed. ERROR → Device error message displayed in the Pandora application. – Check the connected device. → Pandora system is undergoing maintenance. – Try again later. BAD NETWORK → The connected device is out of area. – Connect the device to a network. NO STATIONS → No station found. – Create a station in the Pandora application on your connected device. NO BT DEVICE GO TO BT MENU TO REGISTER → No Bluetooth device found.
NOT FOUND → The application has not started running yet. – Operate the mobile device to start up the application. NO BT DEVICE GO TO BT MENU TO REGISTER → No Bluetooth device found. – Connect the unit and the device via Bluetooth (page 16). NO SIGNAL → The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal. – Move your vehicle outdoors with a clear view of the southern sky.
Handling guidelines be possible. Using such discs may result in damage to this equipment. • Do not attach commercially available labels or other materials to the discs. – The discs may warp making the disc unplayable. – The labels may come off during playback and prevent ejection of the discs, which may result in damage to the equipment. USB storage device Discs and player • Use only discs that feature either of the following two logos. • Use 12-cm discs. • Use only conventional, fully circular discs.
CAUTION • Pioneer cannot guarantee compatibility with all USB mass storage devices, and assumes no responsibility for any loss of data on media players, smartphones, or other devices while using this product. • Do not leave discs or a USB storage device in any place that is subject to high temperatures. WMA files File extension Bit rate Sampling frequency Windows Media™ Audio Professional, Lossless, Voice/DRM Stream/Stream with video .wma 48 kbps to 320 kbps (CBR), 48 kbps to 384 kbps (VBR) 32 kHz, 44.
Playable folder hierarchy Playable folders Playable files File system Not compatible USB device • There may be a slight delay when starting playback of audio files on a USB storage device with numerous folder hierarchies. Playable folder hierarchy Up to eight tiers (A practical hierarchy is less than two tiers.) Playable folders Up to 1 500 Playable files Up to 15 000 Playback of copyright- Not compatible protected files Partitioned USB Only the first partition device can be played.
Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. WMA Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2014 Xiph.
Pandora® internet radio PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries. Please visit http://www.pandora.com/legal for more information. Specifications General MIXTRAX MIXTRAX is a trademark of the PIONEER CORPORATION. Spotify® SPOTIFY and the Spotify logo are among the registered trademarks of Spotify AB.
CD player System: Compact disc audio system Usable discs: Compact disc Signal-to-noise ratio: 94 dB (1 kHz) (IEC-A network) Number of channels: 2 (stereo) MP3 decoding format: MPEG-1 & 2 Audio Layer 3 WMA decoding format: Ver. 7, 8, 9, 9.1, 9.2 (2 ch audio), Ver. 10, 11, 12 (Windows Media Player) AAC decoding format: MPEG-4 AAC (iTunes encoded only) (Ver. 10.6 and earlier) WAV signal format: Linear PCM (Noncompressed) USB USB standard specification: USB 2.0 full speed Maximum current supply: 1.
Bluetooth English Version: Bluetooth 4.0 certified Output power: +4 dBm Maximum (Power class 2) Frequency band(s): 2 400 MHz to 2 483.5 MHz Bluetooth profiles: GAP (Generic Access Profile) SDAP (Service Discovery Application Profile) HFP (Hands Free Profile) 1.6 PBAP (Phone Book Access Profile) A2DP (Advanced Audio Distribution Profile) AVRCP (Audio/Video Remote Control Profile) 1.5 SPP (Serial Port Profile) 1.
Vlllt our webllte/VIIIIR nOire lite Web /VIIIte nulllrO IIIlO Web Register yow product at ~gi.rtn~ WJin prodMitaa Regi.rtn su prodMcto en http://Www.ploneerelectronlcs.com iliConada ""c..enewu.dtl hHp:ltwww.ploneerelectronlcs.ca -LHmoboutp-.ctu~[ouchun,_,.u~)IDr)'DOJr pn!duct. - floGioar)'DOJr p-lD receive noaceo obout p-.ctu~ll'ldlD llllfeguard purchua datalla In ourtllaln tha evant of IDBB or 1haft. - Acoelo owner's monualt,""""' porta lnformollon, """""" lnbmollon, and much mora.
English ESTABLISH A SAFE LEVEL: Th lsgulde islntendedto guide you throughthe basic functiOnsof thisunit. For details, p lease refer to t he Owner's manual stored on t he web site. http://www.pioneerelectronks.cr~m/support CD RDS RECEIVER AUTORADIO CD RDS REPRODUCTOR DE CD CON RECEPTOR RDS To ensure p roper use, p lease read through t his guide before using t his product.lt is especially important that you read and observe WARNINGS and CAUTIONS in lhis guide.
Perform these connections when using a subwoofer This unit without t he optional amplifier. + GJ Ill ® -~~~~-~.... : @ Orangefwhite (Only for FH·S7008SIS7018S) Connecttoacar'silluminationsignal. Power amp (sold separately) Perform these connections when using the optional amplifier. ___1!./.,-,"= ·aJ"'·:"· '=~® (j) Microphone3m{9h.10-1/8in.) ® SlrlusXM Connect Vehicle Tuner Input ':!rlmportant (]) Antenna input inp<~rallel willrepresenta201oad.
PIONEER ELECTRONICS (USA) INC. PIONEER ELECTRONIQUE DU CANADA, INC. GARANTIE LIMITEE GARANTIE VALl DE SEULEMENT DANS LE PAYS OU LE PRODUIT A ETE ACHETE GARANTIE Pioneer Electronics (USA) Inc. (PUSA) et Pioneer Electronique du Canada, Inc. (POC) garantissent que les produits distribues par PUSA aux Etats-Unis et par POC au Canada qui, a pres avoir ete installes et utilises conformement au manuel de l'utilisateur inclus avec l'unite.
PIONEER ELECTRONICS OF CANADA, INC. PIONEER ELECTRONICS (USA) INC. LIMITED WARRANTY WARRANTY VALID ONLY IN COUNTRY OF PRODUCT PURCHASE WARRANTY Pioneer Electronics (USA) Inc. (PUSA), and Pioneer Electronics Of Canada, Inc. (POC), warrant that products distributed by PUSAin the U.S.A.
