Instruction Manual

10. The product will reboot after the update is finished. Do not touch anything even when the

screen is blacked out. After it has finished rebooting, the screen will return to SOURCE OFF

11. Press and hold SRC/OFF to set the unit Source OFF

12. Press and hold SRC/OFF to display the Initial menu

13. Turn the Multi Control dial to select “SYSTEM RESET”, next press to confirm

14. Select “YES” to activate the System reset

15. Do not touch anything even when the screen is blacked out. After the rebooting is finished,

the screen will return to the menu screen.

16. The firmware update is now complete. Your Pioneer CD Receiver is now ready for use.

17. Check if the firmware has been updated. Perform the same procedure “A. Check the

current firmware version of the unit

” to check if the firmware has been updated.

Contact Information

Pioneer Customer Support Center

http://www.pioneer.eu

------------------------------------------------------------