Instruction Manual

ManualsBrandsPioneer ManualsCD ReceiversPioneer DEH-S510BT CD Receivers

System Firmware Update Instructions

for 2019 Pioneer CD Receivers

REMARKS:

✓ If you have any difficulty carrying out these instructions, please contact Pioneer

Customer Support. Once upgraded to this version, it is not possible to downgrade to a

lower version.

✓ Please download and print these instructions before downloading and installing the

firmware update. It is important that you complete all steps correctly and in the order

described below.

✓ This update applies only to the following models and which are sold in Europe:

DEH-S510BT

MVH-S510BT

DEH-S410BT

MVH-S410BT

DEH-S41BT

MVH-S41BT

DEH-S310BT

MVH-S310BT

A. Check the current firmware version of the unit

PROCEDURE:

1. Start the vehicle engine.

2. If AV Source is On, Press and hold the [SRC/OFF] button to switch off the source.

3. Press and hold SRC/OFF to display the Initial menu. Next press the Multi Control to confirm.

4. Rotate the Multi Control to select “SYSTEM UPDATE”, then press to confirm.

5. Select the “SYSTEM INFO” to confirm the system info.

6. After the “SYSTEM INFO” screen appears, check the firmware version.

If the version number is 8.27 or higher, it is not necessary to update the firmware. If the version

number is lower than 8.27, it is necessary to update the firmware. Please continue to Step B.

Summary of content (4 pages)

PAGE 1
System Firmware Update Instructions for 2019 Pioneer CD Receivers REMARKS: ✓ If you have any difficulty carrying out these instructions, please contact Pioneer Customer Support. Once upgraded to this version, it is not possible to downgrade to a lower version. ✓ Please download and print these instructions before downloading and installing the firmware update. It is important that you complete all steps correctly and in the order described below.
PAGE 2
B. Downloading the Firmware Update File Download the correct file from the website to a folder on your computer. MODEL DOWNLOAD FIRMWARE FIRMWARE SIZE 19DEH_A0827.zip 19DEH_A0827.scd 23.203.792 bytes DEH-S510BT DEH-S410BT DEH-S41BT DEH-S310BT MVH-S510BT MVH-S410BT MVH-S41BT MVH-S310BT C. Create the System Firmware Update USB memory device: USB memory device requirements: - USB specification 2.
PAGE 3
during the firmware update process, as this may result in severe damage to your unit. ✓ Make sure to disconnect all external mobile devices connected to your unit. ✓ The update process takes approximately 6 minutes to complete. PROCEDURE: 1. Start the vehicle engine. 2. Connect the USB storage device to the USB input on your unit. 3. If AV Source is On, Press and hold SRC/OFF to set the unit to Source OFF. 4. Press and hold SRC/OFF to display the Initial menu. Press the Multi Control to confirm. 5.
PAGE 4
10. The product will reboot after the update is finished. Do not touch anything even when the screen is blacked out. After it has finished rebooting, the screen will return to SOURCE OFF 11. Press and hold SRC/OFF to set the unit Source OFF 12. Press and hold SRC/OFF to display the Initial menu 13. Turn the Multi Control dial to select “SYSTEM RESET”, next press to confirm 14. Select “YES” to activate the System reset 15. Do not touch anything even when the screen is blacked out.