Installation Guide

- 13 -- 13 -
English
AUDIO settings
Menu Item Description
FADER*1
Adjust the front and rear speaker balance.
BALANCE
Adjust the left and right speaker balance.
EQ SETTING
[SUPER BASS], [POWERFUL],
[DYNAMIC], [NATURAL], [VOCAL],
[VIVID], [CUSTOM1], [CUSTOM2],
[FLAT]
Select an equalizer band and
level fo
r fu
rther customizing.
Equalizer band: [80HZ], [250H
Z],
[800HZ], [2.5KHZ], [8KHZ]
Equalizer level: [+6] to
[–6]
Select or customize the equalizer curve.
[CUSTOM1] can be set separately for each source.
Ho
wever, each of the below combinations are set
to the same setting automatically.
[CUSTOM2] is a shared setting used for all
so
u
rces.
You can also switch the equalizer by pressing
repeatedly.
LOUDNESS
[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.
SUB.W*2
[NOR], [REV], [OFF] Select the subwoofer phase.
SUB.W CTRL*2
*3
Cut-off frequency: [50H
Z],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Output level: [–24
] t
o [+6]
Slope level: [–12], [–24]
O
nly frequencies lower than those in the
selec
ted range are output from the subwoofer.
BASS BOOST
[0] to [+6] Select the bass boost level.
HPF SETTING
Cut-off frequency: [O
F
F], [50HZ],
[63HZ], [80HZ], [100HZ], [125HZ],
[160HZ], [200HZ]
Slope level: [–12],
[–24]
O
nly frequencies higher than the high-pass filter
(H
PF) cutoff are output from the speakers.
SLA
[+4] to [–4] Adjust the volume level for each source except
FM
.