Instruction Manual

ManualsBrandsPioneer ManualsCar SpeakersDEH-7300BT

This unit can display the text information of a com-

pressed audio file even if they are embedded in a

Western European or Russian language.

! If the embedded language and the selected lan-

guage setting are not the same, text information

may not display properly.

! Some characters may not be displayed properly.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

EUROPEAN (European)—RUSSIAN (Russian)

3 Press M.C. to confirm the selection.

PW SAVE (power saving)

Switching this function on enables you to reduce the

consumption of battery power.

! Turning on the source is the only operation al-

lowed when this function is on.

1 Press M.C. to turn the power save on or off.

BT CLEAR (resetting the Bluetooth wireless technol-

ogy module)

Bluetooth telephone data can be deleted. To protect

personal information, we recommend deleting this

data before transferring the unit to other persons. The

following settings will be deleted.

! phone book entries on the Bluetooth telephone

! preset numbers on the Bluetooth telephone

! registration assignment of the Bluetooth tele-

phone

! call history of the Bluetooth telephone

! information of the connected Bluetooth telephone

1 Press M.C. to show the confirmation display.

YES is displayed. Clearing memory is now on

standby.

If you do not want to reset phone memory, press

. The display reverts .

2 Press M.C. to clear the memory.

CLEARED is displayed and the settings are de-

leted.

! While this function is in use, do not turn off

the engine.

VER INFO (Bluetooth version display)

You can display the system vers ions of this unit and

of Bluetooth module.

1 Press M.C. to display the information.

S/W UPDATE (updatin g the software)

This function is used to update this unit with the lat-

est software. For information on the software and up-

dating, refer to our website.

! Never turn the unit off while the software is being

updated.

1 Press M.C. to display the data transfer mode.

Follow the on-screen instructions to finish updat-

ing the software.

Using an AUX source

1 Insert the stereo mini plug into the

AUX input jack.

2 Press S (SRC/OFF) to select AUX as the

source.

Note

AUX cannot be selected unless the auxiliary set-

ting is turned on. For more details, refer to AUX

(auxiliary input) on the previous page.

Section

Operating this unit