User Manual

Using djay 2 for Android

4 Turn the [MASTER LEVEL] control to adjust the audio

level of the speakers (only when Android 6.0, 5.1, or 5.0).

Adjust the audio level output from the [MASTER] output terminals to an

appropriate level.

! If sound is not output from the [MASTER] output terminals or the

level of the output sound is low, increase the volume of the Android

device.

Sound is output from the speakers.

Monitoring sound with headphones

(only when Android 6.0, 5.1, or 5.0)

1 Set the positions of the controls, etc., as shown

below.

Names of controls, etc. Position

[HEADPHONES LEVEL] control Turned fully counterclockwise

2 Set the crossfader to the position of the deck 2 side

(right side).

The headphone monitor of the deck 1 side (left side) turns on.

! djay 2 for Android turns on the headphone monitor of the deck on the

side opposite to the position of the crossfader.

3 Turn the [HEADPHONES LEVEL] control.

Adjust the sound level output from the headphones to an appropriate

level.

Inputting microphone sound (only when

Android 6.0, 5.1, or 5.0)

The sound of the microphone connected to the [MIC] input terminal can

be mixed.

1 Connect the microphone to the [MIC] input terminal.

2 Turn the [MIC LEVEL] control to adjust the audio level

of the microphone.

Quitting the system

1 Quit djay 2 for Android.

2 Press the [STANDBY/ON] button until the unit enters

standby.