Manual

CONNECTIONS I
. _i ._ __=
Recording
connection
cord
Playback
connexion
cord
Power cord Z.,
• Remote control cord
TAPE REC/PLAY
jacks
ooOl
Stereo Amplifier
CONTROL OUT jack
• Read through the operating instructions of the stereo compo-
nents which you intend to connect to this unit.
• Turn the power on only after making all of the connections.
• Make sure that all of the connection plugs are inserted se-
curely, as improper connections may 0enerate noise.
I CONNECTING THE RECORDING ANDPLAYBACK CORDS
Left channel
White plug
Right channel
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the
deck to the recording (output) jacks of the amplifier, and the PLAY
(OUTPUT) jacks of the deck to the play (input) jacks of the amPli-
fier.
• Connect the plugs properly:
Left channel -- White plug
Right channel -- Red plug
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your
hands are wet as this could cause a short circuit or electric shock.
Do not place the unit, a piece of furniture, etc., on the power cord,
or pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed in such a way that they
are not likely to be stepped on. A damaged power cord can cause
fire or give you an electrical shock. Check the power cord regu-
law. When you find it damaged, ask your nearest PIONEER auth-
orized service canter or your dealer for a replacement.
t iPIONEER SYSTEM REMOTE CONTROL i
CONTROL IN jack
Use the enclosed Remote Control Cord to connect this jack to the
CONTROL OUT jack of another component which bears the
_]_ mark (indicating that it is equipped with PIONEER System Re-
mote Control). You will then be able to operate this unit using the
Pioneer system remote control unit. If the remote control unit
does not have separate buttons for deck I and deck II, or a selec-
tion button to choose deck I or deck II, the buttons will only oper-
ate deck II. To operate deck I with a remote control unit which was
not designed for double deck cassette decks, see page 8.
CONTROL OUT jack
Intermediary jack which outputs signals from the CONTROL IN
jack of this unit to the input jack of another unit. Connect this jack
to the CONTROL IN jack of another component compatible with
Pioneer System Remote Control.
NO TE:
Be sure to connect both of the control cord's plugs securely to the
CONTROL IN and CONTROL OUT jacks. Do not connect only one
end of the cable.
CONNECTING THE POWER CORD !
J
Insert the power cord of the cassette deck into the accessory AC
outlet of your amplifier, or into a normal household outlet.
6
< RRB1150>
Fn