Manual

CONNECTIONS
Recording
connection
=ord
TAPE REC/PLAY
jacks
Playback
connection
cord
Power cord
Control cable
Io o o 0"
Stereo Amplifier
CONTROL OUTjack
Cor_emlng about the
:ontrol cable be sur(
Io use the item in.
=luded in the pack.
age.
• Before making or changing the connec-
tion_ switch off the power switch and
disconnect the power cord from the AC
outlet.
• Read through the operating instructions of the
stereo components which you Intend to connect
to this unit.
• Make sure that all of the connection plugs are In-
serted securely, as improper connections may
generate noise.
CONNECTING THE RECORDING
AND PLAYBACK CORDS
PIONEER SYSTEM REIVIOTECONTROL
CONTROL IN jack
Use the enclosed control cable to connect this Jack to
theCONTROLOUTJackofanothercomponentwhich
bears the [] mark (indicating that it is equipped with
PIONEER System Remote Control). You will then be
able to operate this unit using the Pioneer system re*
mote control unit. If the r_-note control unit does not
have separate buttons for deck I end deck II, or a se-
lectiun button to choose deck I or deck II, the buttons
will only operate deck II. To operate deck I with s re-
mote control unit which was not designed for double
deck cassette players, see page 9.
Left channel..___::_ white plug
Rig_ channe_"_ I_:_
Red plug
Connect the TAPE jacks of your amplifier to the LINE
.jacks of the cassette deck. Be sure to connect the
REC (INPUT)jacks of the deck to the recording (out-
put)jacks of the amplifier, and the PLAY (OUTPUT)
jacks of the deck to the play (input) jacks of the am-
plifier.
• Connect the plugs properly:
LeRchannel -- White plug
Right channel -- Red plug
CONTROL OUT jack
Intermediary jack outputs signals from the CONTROL
IN Jeck of this unit to the inputjeck of another unit.
Connect this jack to the CONTROL IN Jackof another
component compatible with Pioneer System Remote
Control.
/t/ORE:
Be sure to connect both of the control cable's plugs
secureiy to the CONTROL IN and CONTROL OLITJacks.
Do net contract only one end of the cable.
CONNECTING THE POWER CORD }
Insert the power cord of the cassette deck into the
accessory AC outlet of your amplifier, or into a nor-
mal household outlet.
7