Manual

I TAPE COPYING (from DECK I to DECK II)
4 2
1 1
• The tape copying function permits you to copy
contents of e tape from DECK Ito Deck II.
• The SYNCHRO COPY button is used to select el-
",her normal speed copying, or high-speed copy-
ing (copying at twice the normal playback speed),
1. Load a tape for playback into DECK I and a tape
for re_rdlng into Deck II.
2. Set the REV MODE switch.
3. Set the tape transport directlo_
• Tape copying is always performed in _ direc-
tion indicated by the tape transport indicator
( O or D). To change this direction, press the
desired playback button (l_ or 4), then imme-
diately press the stop(m)button.
4. Preas the SYNCHRO COPY buttan to ealaat either
NORMAL or HiGH speed.
NORMAL : Tape copying at normal speed allows
listen during playback (COPY indlce-
tor lights steadily),
HIGH : Tape copying at double speed (COPY
indicator flashes). Playback will still
audible,
To stop copying
Press the stop (11)button of either deck. Both decks
will stop,
NOTES_
• The tepe In DECK II willbe copied In the same
type of DOLBY NR (B/C) as DECK l's tmpe, r_ar_
lessofltsownsatUr_ Wben_tetdng tomecop
led tape, set the DOLBy NR (B/C) to the type
us_ forrecorda_.
• Ira nearbytelevisionsetison while hlgl_spsedcopy-
ing is being performed, e high-pitched interference
sound may be heard on the tape. In th_s case, either
use the normal speed copying function, or turn off
the television.
• During high.speed copying, none of the operation
buttons will function except for the stop _1)button.
• Dur_gcormalspeedcop_ng, therecomingmute_)
and pause ttl)buttons of deck II also function.
• Tape copying is cancelled when either of the two
tapes reaches the en_ Therefore it is advisable to
use tapes of the same length.
• The sound qualEy of the copied tape willbe som_
what less than the original. Therefore When making
more than one copy, aiways record from the orkJinal
tape (do not make a copy of a copy).
• The recordingleveladjustment is not necessary dur-
legtapecopying.
15