Manual

ManualsBrandsPioneer ManualsAudio EquipmentOfficial Pioneer stereo double cassette deck

CONNECTIONS

:_ecording Playback

connection connection

cord cord

TAPEREC/PLAY

jacks

Power cord

Remote control cord

Ioo oQ"

Stereo Amplifier

CONTROL OUT jack

Concerning about the re-

mote control cord or CD •

DECK SYNCHRO control

cord, be sure to use the

items inclu-ded in the

package.

• Before making or changing the connections,

switch off the power switch and disconnect the

power cord from the AC outlet.

• Readthroughthe operating instructionsof the stereo compo-

nents whichyou intendto connectto this unit.

• Make surethat allof the connectionplugsare insertedsecure_,

as improper connectionsmaygenerate noise.

CONNECTING THE RECORDING AND

PLAYBACK CORDS

Left channel White plug

Right channel_'_

Red plug

Connect the TAPE jacks of your amplifier to the LINE jacks of the

cassette deck. Be sure to connect the REC (INPUT) jacks of the deck

to the recording (output) jacks of the amplifier, and the PLAY (OUT-

PUT) jacks of the deck to the play (input) jacks of the amplifier.

• Connect the plugs properly:

Left channel-- White plug

Rightchannel -- Red plug

I PIONEER SYSTEM REMOTE CONTROL I

CONTROL IN jack

Use the enclosed Remote Control Cord to connect this jack to the

CONTROL OUT jack of another component which Pears the _ mark

(indicating that it is equipped with PIONEER System Remote Con-

trol). You will then be able to operate this unit using the Pioneer sys-

tem remote control unit. If the remote control unit does not have

separate buttons for deck I and deck II, or a selection button to

choose deck ( or deck II, the buttons will only operate deck I1. To

operate deck I with a remote control unit which was not designed

for double deck cassette players, see page 8.

CONTROL OUT jack

Intermediary jack outputs signals from the CONTROL IN jack of this

unit to the input jack of another unit, Connect this jack to the CON-

TROL IN jack of another component compatible with Pioneer Sys-

tem Remote Control.

NOTE:

Besure to connectbothof thecontrol cord'splugssecurelyto the

CONTROL IN and CONTROL OUTjacks. Do not connect onlyone

end of the cable.

I CONNECTING THE POWER CORD

Insert the power cord of the cassette deck into the accessory AC

outlet of your amplifier, or into a normal household outlet.