Manual

TAPE COPYING (from DECK I to DECK II)

4 2

1 1

• The tape copying function permits you to copy the contents of a

tape fmornDECK I to Deck II.

• The SYNCHRO COPY button is used to select either normal

speed copying, or high-speed copying (copying at twice the nor-

mal playback speed).

1. Load a tape for playback into DECK I and a tape for re-

cording into Deck II,

2. Set the REV MODE switch.

3. Set the tape transport direction.

• Tapecopyingisalwaysperformed inthe directionindicatedby

the tapetransportindicator( <3or C>). Tochangethis direc-

tion,pressthedesiredplaybackbutton(1_or<1),then immedi-

ately pressthe stop(n) bu_on.

4. Press the SYNCHRO COPY button to select either

NORMAL or HIGH speed.

NORMAL : Tape copyingat normalspeed allows listenduring

playback(COPYindicatorlights steadily).

HIGH : Tape copying at double speed (COPY indicator

flashes). Playbackwill stillaudible.

To stop copying

Pressthe stop(11)buttonofeitherdeck.Bothdeckswillstop_

NOTES:

• ThetspQ_DECK#w#lbocopladlnthessmetyp_ofDOLBY

NR (B/C/ as DECK I's tape, regardless of Its own setting.

Whon listening to the copied trope, set the DOLBY NR (B/C)

to the lype ussd for recording.

• If a nearby television set is on while high-speed copying is being

performed, a high-pitched interference sound may be heard on

the tape. In this case, either use the normal speed copying func-

tion, or turn off the television.

• During high-speed copying, none of the operation buttons wi//

function except for the stop Jl) button.

• Duringnormalspeedcopying, therecordingmutefO)and pause

(ll)buttons of deck II also function.

• Tape copying is cence//ed when either of the two tapes reaches

the end. Therefore it is advisable to use tapes of the same length.

• The sound quality of the copied tape will be somewhat less than

the original. Therefore when making more than one copy, always

record from the original tape (do not make a copy of a copy).

• The recording level adjustment is not necessary during tape copy-

ing.