PORTABLE MUSIC SYSTEM STZ-D10Z-R Operating Instructions
IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
[U.S. model only] 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
[U.S. model only] Information to User Alterations or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. D8-10-2_A1_En CAUTION This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded D8-10-3a_A1_En cables and connectors for connections. [For U.S.A.
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Contents 01 Introduction Checking what’s in the box......................................................................... 6 Installing the unit......................................................................................... 6 About drip proofing.......
Introduction Checking what’s in the box ! ! ! ! ! ! ! Remote control unit Lithium battery (CR2025) USB cable AC adapter Power cord Warranty card Quick start guide Installing the unit ! When installing this unit, make sure to put it on a level and stable surface. Don’t install it on the following places: – on a color TV (the screen may distort) – near a cassette deck (or close to a device that gives off a magnetic field). This may interfere with the sound.
When in use Noise and etiquette Playing music is fun but depending on circumstances, annoying. Please be considerate of others when using the device. It is up to your consideration whether the volume is turned high or low. In particular, even the smallest noise can be a nuisance in public places and during the night when it’s quiet. Be considerate of others and create a pleasurable environment.
Before you start Before using the remote control The battery supplied with this unit is stored in the battery casing. Remove the protective seal from the battery casing. Note When you notice a decrease in the operating range, replace the battery. Replace the battery When replacing the battery, use a commercially available Lithium CR2025 battery. 3 2 1 1 WARNING About lithium battery ! Danger of explosion if battery is incorrectly replaced.
Using the remote control The remote has a range of about 7 m (23 ft.) at an angle of about 30º from the remote sensor. 30° 30° C FUN ON NDBY/ STA VOL PO TEM LS TOO IP 8 SK ENTER IP 8 SK PO TEM MENU DJ MIX TLE BAT T EXI M RHYTH CALL E CU MEMO 7 m (23 ft.) Keep in mind the following when using the remote control: ! Make sure that there are no obstacles between the remote and the remote sensor on the unit.
Installing batteries WARNING Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions: ! Never use new and old batteries together. ! Do not mix and use nickel hydride battery with different charges. ! Insert the plus and minus sides of the batteries properly according to the marks in the battery case. ! Batteries with the same shape may have different voltages. Do not use different batteries together.
Controls and displays Remote control unit 1 STANDBY/ON 2 TOOLS 3 8 SKIP 4 MENU FUNC 7 VOL 8 TEMPO ENTER 8 SKIP 9 TEMPO 5 CALL 6 BATTLE DJ MIX RHYTHM EXIT 10 10 CUE MEMO 1 uSTANDBY/ON 7 FUNC Switches the unit between standby and on. (page 14) Use to change the input function. The source changes as below.
Front/Top panel 1 POWER 2 3 4 FUNCTION 5 TEMPO VOLUME 8 12 12 11 10 11 10 9 1 POWER 13 13 7 DJ MIX BATTLE 14 14 9 10 iPod cover Switches the unit between standby and on. (page 14) 11 Lock lever 2 Power indicator When the power is on, this indicator lights. If you raise the lock lever from the behind the frame, the iPod cover will open. 3 FUNCTION 12 Front panel display Use to change the input function. The source changes as below.
Rear panel 5V 500mA MIC VOL PC connect MIN 1 PHONES AUX IN 6 7 DC IN 18 V USB MAX 2 3 4 5 8 1 Battery cover 2 Microphone volume knob Use to adjust the volume of the sound inputted through the microphone. The sound from the microphone is always outputted when the device’s power is on, but not outputted when headphones are connected. 3 Microphone jack Use to connect your microphone. 4 PC connect terminal Use the supplied USB cable to connect the PC.
Basic playback How to use This is the device’s basic playback operation. If you select a different function at step 3, the device will switch to a sound source from an external input, USB or iPod. 1 Press uSTANDBY/ON on the remote control (or POWER on the main unit) to turn on the power of this unit. The display will show the volume after the STEEZ logo, then the screen will finally show the input function last selected.
Playing tracks from an internal memory or USB memory Memory USB Listen to music by connecting a USB memory device that has your music files to the device. Further, you can listen to music anytime by storing music files in the internal memory of the device using the music management software “MIXTRAX” via a PC. More so, you can enjoy a variety of dance functions on the device with the music files analyzed with “MIXTRAX”. For details, see Various dance functions on page 20.
5 Start a track playback. The following will be displayed on the playback screen. 1 Memory 2 3 Song2 Artist1 4 5 BPM 109 +10% 1:40 6 1 2 3 4 5 6 7 8 9 a b c ! 9 10 11 CUE 5:25 7 12 8 Function Song name Artist name BPM (tempo) Elapsed time Cue location Cue settings ON Dance function OFF Playback status Playback mode ( Random / Repeat All / Repeat One） Dance genre Total time Some of the above may not be displayed simultaneously.
Playback in a Folder mode USB You can playback tracks stored in a USB memory device by selecting a folder. ! The dance function cannot be used in a folder mode playback. ! This unit can display folders up to 20 hierarchies. 1 Select Folder in the initial screen of the USB memory and select folders and tracks for a playback. Folder Track Favorites Album MIXTRAX Library Folder Song1.mp3 Song2.mp3 Song3.mp3 2 Start a track playback.
Notes ! ! ! ! ! ! ! This device has been developed and tested for the software version of iPod/iPhone indicated on the website of Pioneer. http://pioneer.jp/homeav/support/ios/na/ -- North America http://pioneer.jp/homeav/support/ios/sa/ -- South America http://pioneer.jp/homeav/support/ios/eu/ -- Europe http://pioneer.
iPod 3 1 2 3 4 5 4 Song3 Artist2 1 2 2:20 4:45 5 Song name Artist name Elapsed time Playback status Total time About iPhone playback ! ! ! Sound will only switch from iPhone to the device after authentication process is completed in approximately 10 seconds. Incoming calls will pause the playback and iPhone ringtones will be heard from the device speakers only. Once the calls are answered, the conversation can only be heard through the built-in iPhone speaker.
Various dance functions The product features excellent dance functions that allows you to enjoy dancing using your own music data. The dance function can be used using the music stored in the internal memory or your own USB memory device. However, to exploit all functions, you must analyze the music data in advance on a PC using the music software [MIXTRAX]. Please refer to Using MIXTRAX on page 24 for more information.
! ! ! There is a five-second countdown (for preparation) before the battle begins (the track from the selected Genre will start playing back). When the battle is finished, a voice will playback announcing the completion of the battle (randomly selected from multiple voices). A time call announcing the remaining 1 minute and 10 seconds of the battle and another declaring its completion will be played back. Start a battle in a Battle mode Set a Battle mode and start a battle.
Using the DJ Mix mode Memory/USB/STEEZ Playback of music tracks from a pre-selected genre. All tracks of the Dance Genre will be played back in an order that allows continuous dancing. 1 With the power turned on, press MENU. Menu screen appears on the front panel display. Menu Battle DJ Mix Rhythm Machine Setup 2 Use a/b to select ‘DJ MIX’, then press ENTER. A Genre selection screen for the DJ Mix mode will be shown. DJ Mix Dance Genre Free Start 3 Select a Genre to be Played Back First.
2 Use a/b to select ‘Rhythm Machine’, then press ENTER. A Rhythm Sequence selection screen for the Rhythm Machine mode will be shown. Rhythm Machine Preset 1 Preset 2 Preset 3 Preset 4 Preset 5 3 Start a track playback by selecting a rhythm sequence. ! To end the Rhythm Machine playback, press the EXIT button. The device will resume to the Stop status for the track that was played back in a function effective before the Rhythm Machine mode.
Connecting a PC Installing the music management software MIXTRAX onto your PC will and then transferring music data analyzed by MIXTRAX across to the device will allow you to use various dance functions. 1. In order to download MIXTRAX, execute “MIXTRAX Download” from the root folder in this device via the PC connected to this device. 2. If you are unable to download using the above method, download from the following URL: http://www.mixtraxnet.com/support/download/index_en.
Updating the firmware Important ! ! ! Cannot be updated if the unit is using batteries. Connect the unit to an AC adaptor, and update after connecting the unit to a PC. Do not in any circumstances unplug the power cord until “Update completed.” is displayed when the firmware is being updated in accordance with the 7 steps below. Firmware updates may take more than the time described below depending on your network environment. 1 Turn on the PC and launch the MIXTRAX.
Using the Setup menu Configure setting such as audio quality for tracks that are played back on the device, the playback method, power, and display. 1 With the power turned on, press MENU. Menu screen appears on the front panel display. Menu Battle DJ Mix Rhythm Machine Setup 2 Use a/b to select ‘Setup’, then press ENTER. Setup screen appears on the front panel display. Setup Playback Power Save Display Information Reset Setting 3 Select the setting you want to adjust.
Configure the power saving settings By configuring the power saving settings, you can save the battery’s power and reduce the amount of power used. To configure the power saving settings, select Power Save in the Setup menu. You can set Display Off, Auto Power Off and Key Light Off separately for when operating by battery or AC adapter. Settings for battery powered use Power Save Battery AC Power Settings for AC adapter powered use Battery AC Power Display Off 30 sec. Display Off 30 sec.
Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Take a look at the other components and electrical appliances being used, because sometimes the problem may lie there. If the trouble isn’t sorted out even after going through the checks below, ask your nearest Pioneer authorized independent service company to carry out repair work.
iPod/iPhone The device doesn’t recognize iPod touch/iPhone. ! Try the following. 1. Simultaneously keep pressing the sleep button and home button on the iPod touch or iPhone for over 10 seconds to restart. 2. Turn on the device. 3. Connect the iPod touch/iPhone to the device. “Communication error.” shows in the display. ! The device cannot communicate properly with an iPod.
Playable music file formats The music files that the device can play back from the internal memory and USB memory devices are as follows. Category Extension MP3 .mp3 Stream Sampling frequency Bitrate MPEG-1 Audio Layer3 32 kHz, 44.1 kHz, 48 kHz [CBR] 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps [VBR] 8 kbps to 320 kbps MPEG-2 Audio Layer3 32 kHz, 44.1 kHz, 48 kHz [CBR] 8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160 kbps [VBR] 8 kbps to 320 kbps WMA .
Cleaning the unit ! ! ! Use a polishing cloth or dry cloth to wipe off dust and dirt. When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers. Never use thinners, benzene, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface. Specifications Amplifier section RMS power output Front Left/Right..............
http://www.pioneer-steez.com To register your product, find the nearest authorized service location, to purchase replacement parts, operating instructions, or accessories, please go to one of following URLs : Pour enregistrer votre produit, trouver le service après-vente agréé le plus proche et pour acheter des pièces de rechange, des modes d’emploi ou des accessoires, reportez-vous aux URL suivantes : In the USA/Aux Etats-Unis http://www.pioneerelectronics.com In Canada/Aux Canada http://www.
