Upgrade Instructions and Operation Manual Addendum 2010 NAVIGATION UPGRADE SD-CARD CNSD-110FM This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes.
Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Important ! The screens shown in the examples may differ from actual screens. ! Actual screens may be changed without notice for performance and function improvements.
Chapter Precaution Failure to operate ! Should the navigation system fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. ! Do not lose the supplied Media Number Card (MEDIA NUMBER CARD). If the Media Number Card is lost, reissue of the Media Number (MEDIA NUMBER) is not possible. Also you must submit the Media Number Card when repairs are needed. The card is necessary as proof of authenticity if service is required (including recovery).
Chapter 01 Precaution p Be careful not to touch terminals on the SD memory card. Doing so may cause connection failures. If any terminals are dirty, wipe them with a clean dry cloth. p SDHC Logo is a trademark of SD-3C, LLC. p SD Logo is a trademark of SD-3C, LLC. Manual overview This manual describes how to get the password and activate the upgrade. It also provides an overview of how functions change after the upgrade.
Chapter Precaution Visit us at the following site: http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca 1 Register your product. We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. 2 Receive updates on the latest products and technologies. 3 Download owner’s manuals, order product catalogs, research new products, and much more. 4 Receive notices of software upgrades and software updates.
Chapter 02 License agreement PIONEER CNSD-110FM - for U.S.A. THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS (USA) INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter License agreement 4 EXPORT LAW ASSURANCES You agree and certify that neither the Software nor any other technical data received from Pioneer, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States.
Chapter 02 License agreement PIONEER CNSD-110FM - for Canada THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND PIONEER ELECTRONICS OF CANADA, INC. (“PIONEER”). PLEASE READ THE TERMS AND CONDITIONS OF THIS AGREEMENT CAREFULLY BEFORE USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS. BY USING THE SOFTWARE INSTALLED ON THE PIONEER PRODUCTS, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Chapter License agreement obtained by you outside of Canada, you agree that you will not re-export the Software nor any other technical data received from Pioneer, nor the direct product thereof, except as permitted by the laws and regulations of Canada and the laws and regulations of the jurisdiction in which you obtained the Software. 5 TERMINATION This Agreement is effective until terminated. You may terminate it at any time by destroying the Software.
Chapter 02 License agreement TERMS AND CONDITIONS FOR THE TELE ATLAS DATA erate, or obscure any copyright notice or proprietary legend contained in or on the Data. End User Licensing Terms 3 Limitation of Liability.
Chapter License agreement 5 Termination. This Agreement will terminate immediately and automatically, without notice, if you breach any term of this Agreement. You agree that in the event of termination of the Agreement, you shall return the Data (including all documentation and all copies) to PIONEER and its suppliers. 6 Indemnity.
Chapter 02 License agreement (a) except as otherwise specifically set forth herein, license or otherwise provide the POI Licensed Tele Atlas Products to any third party for the purposes of resale, sublicensing, redistribution or for the purpose of compiling, enhancing, verifying, supplementing, adding to or deleting from any mailing list, geographic or trade directories, business directories, classified directories, classified advertising which is sold, rented, published, furnished or in any manner provid
Chapter License agreement 10 Additional Provisions with respect to Tele Atlas® 3D Landmarks Licensed Tele Atlas Product (the “3D Landmarks”): (The following provisions only refer to the products which contain Tele Atlas® 3D Landmarks Licensed Tele Atlas Product.
Chapter 02 License agreement 12 Miscellaneous. This is the exclusive and complete Agreement between the Licensors and you regarding its subject matter. Nothing in this Agreement shall create a joint venture, partnership or principal-agent relationship between the Licensors and you. Sections 2, 5 and 7 - 11 shall survive the expiration or termination of this Agreement. This Agreement may be amended, altered, or modified only by PIONEER.
Chapter License agreement 02 Licenses License agreement En 15
Chapter 02 16 License agreement En
Chapter License agreement 02 License agreement En 17
Chapter 02 18 License agreement En
Chapter License agreement 02 License agreement En 19
Chapter 03 About the database About the data for the map database ! Modifications related to roads, streets/highways, terrain, construction and other things before/during the development period may not be reflected in this database. Inevitably, those modifications after that period are not reflected in this database. ! Regardless of existing and newly-built things, the data may be different from the actual condition.
Chapter Instructions for upgrading The navigation system upgrade process j 2 Get the password for authentication. = For details, refer to Getting the password for authentication on this page. j 3 Upgrade the software program of your navigation system. = For details of the operation, refer to Upgrading the software program and the map database on the next page. j 4 Check whether the upgrade was done properly.
Chapter 04 Instructions for upgrading 1 Access on the following website to issue your password. http://www.pioneernavigationupdate.com In Canada: http://www.pioneernavigationupdate.ca For issuing the password, follow the instruction on the website. 2 Record the password that you received. You need to input this password accurately. Write down your password to avoid mistakes. 3 Touch [Yes]. The message confirming whether or not to enter the password will appear. 4 Touch [Yes].
Chapter Instructions for upgrading 7 Wait until the upgrade process is complete. 04 Updating the Bluetooth wireless technology software In Canada http://www.pioneerelectronics.ca CAUTION After the installation is complete, the navigation system restarts. Checking whether the upgrade was done properly ! Be sure to upgrade your navigation system first. ! Be careful to follow the update procedure correctly. If you make a mistake, Bluetooth wireless technology functions will become unavailable.
Chapter 04 Instructions for upgrading 7 Touch [Firmware update]. The message confirming whether or not to start the update will appear. 8 Make sure that the current Bluetooth firmware version is 2.50 and the new Bluetooth firmware version is 3.10. 16 If the current version is 3.10, touch [Firmware update]. The message confirming whether or not to start the update will appear. p If the current version is 2.50, return to step 1. 17 Make sure that the current Bluetooth firmware version is 3.
Chapter Changes on the upgraded program By upgrading AVIC-Z110BT with this product, functions and operations will be equivalent to AVIC-Z120BT. Therefore, obtain the Operation Manual for AVIC-Z120BT and use it as your primary reference. http://www.pioneerelectronics.com In Canada http://www.pioneerelectronics.ca Eco-driving function ! The Eco-driving functions are an estimate of the real time fuel consumption to average fuel consumption ratio and is not an actual value.
Chapter 06 Playing a DVD-VR disc You can play a DVD-VR (DVD Video Recording Format) disc using the built-in drive of the navigation system. This section describes operations for DVD-VR discs. Starting procedure 1 Press the MODE button to display the AV operation screen. 2 Insert the disc you want to play into disc-loading slot. The source changes and then playback will start. 3 Use the touch panel keys on the screen to control the disc.
Chapter Playing a DVD-VR disc 06 Using the touch panel keys Playback screen (page 1) 1 b a 9 8 7 6 5 4 Playback screen (page 2) Playing a DVD-VR disc 2 3 c d e f h p With some discs, the icon 9 may be displayed, meaning that the operation is invalid. 1 c CM Skip/CM Skip d = For details, refer to Using the short-time skip function on page 29. 2 Switches the playback mode = For details, refer to Switching the playback mode on page 29.
Chapter 06 Playing a DVD-VR disc 8 Switches to the next page of touch panel keys 9 Switches the display Touching [Disp] changes the information as follows: Disc information display — Repeat range display and on-off state of the subtitle a Recalls equalizer curves = For detailed operations, refer to the Operation Manual for AVIC-Z120BT. b Displays the “Function” menu = For details, refer to Using the “Function” menu on page 30. = For details, refer to Slow motion playback on the next page.
Chapter Playing a DVD-VR disc p Chapter search and time search are not available when disc playback has been stopped. 1 Touch [Search] and then touch [Title] (title), [Chapter] (chapter), [Time] (time). 2 Touch the keys to input the target number or time and then touch [Enter]. 06 Using the short-time skip function This function enables you to skip over your specified interval on the video playback. This is useful to skip commercials on your recorded DVD-VR disc.
Chapter 06 Playing a DVD-VR disc p With some discs, images may be unclear during slow motion playback. p Reversed slow motion playback is not possible. Using the “Function” menu % Touch on the “DVD-VR” screen. The “Function” menu appears. 1 2 3 1 Changes the repeat range Each touch of [Repeat] changes the setting as follows: ! Disc: Plays throughout the current disc. ! Chapter: Repeats just the current chapter. ! Title: Repeats just the current title.
Appendix Troubleshooting Problems in the procedures for updating Cause Action The upgrade process doesn’t start and the navigation system boots up as usual. An incorrect SD memory card has been inserted. Eject the inserted SD memory card and insert the correct upgrade SD memory card. Upgrade has been already done. Check whether the upgrade was done properly. If the upgrade has not been done yet, consult the nearest authorized service station.
PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique TEL: (0) 3/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
