Manual
LD/CDV/CD
TO PLAY ONLY DESIRED SCENES/TRACKS- ProgramPlayback 1
]
Selected chapters (LD) or tracks (CDV/CD) can be played in
any desired order (max. 24 chapters or tracks).
Example: To play CD tracks No. 9, No. 7, and No.
18 respectively:
1. Press PGM.
PGI
(CLD-S270)
PGM
b
%
Display with a CD/CDV
1
2. Enter [_],[_, [_], andE_with the digit buttons.
(CLD-S270)
%[_ _[_ After approx, lsecond
_____ | Total Time Progla4m ]
!;oo
9 7 +10 8
D
A pause between tracks/chapters can also be programmed
by pressing II instead of the digit buttons.
If you make a mistake during entry:
Press CLEAR on the remote control unit and enter the
correct number with the digit buttons.
3. Press •.
0
Q
PLAY
• You can view the state of programming on the monitor
TV screen.
To modify the program contents ]
To delete or change a programmed chapter/track or pause:
1. Press PGM.
2. Press I_ or _ to place the cursor (_) on the left side
of the chapter/track or pause to be changed.
3. To delete it, press CLEAR. To replace it with another
chapter/track, enter the new chapter/track number with
the digit buttons.
Press II to enter a pause.
4. Press PGM to complete programming. Pressing • also
completes programming and starts program playback
with the new program contents.
• Programmed chapter/track being played cannot be erased
or changed.
• Programmed pause being engaged cannot be erased or
changed.
I To clear the program playback I
Press CLEAR to return to normal playback.
To clear the program contents:
• Open the disc table.
• Press CLEAR while in stop mode.
NOTES:
• If I,_ is held depressed during Program Playback, the
playback position will move to another chapter/track, but
when I_ is released, the next chapter/track in the
program will be played. If ._1 is held depressed, the
playback position returns to the beginning of the current
chapter or track being played, but it will not go beyond it
to a previous chapter or track in the program.
• During program playback, t_ and _ can be used to
skip the programmed chapters/tracks or pause.
To check the program contents /
During program playback or in stop mode, press PGM to
clisota_/the 0rogram contents on the monitor screen. When
PGM is pressec_ aga'_n,typepTogram co_te_ts d_\sa_ea_.
17
<VRB1143>