Manual

ManualsBrandsPioneer ManualsAudio EquipmentOfficial Pioneer cd player

CDICDV/LD

Front panel buttons and remote control unit buttons with the same

name or mark have the same function.

Operations indicated by the [ _ ] mark are performed with

the remote control unit.

Load a disc.

As shown in the following diagram, place the disc on the disc table in the

groove corresponding to the size of the disc.

If the disc is not centered correctly on the disc table, the disc will not be played

or the disc or the player may be damaged.

Always place the disc correctly according to the required disc size on the disc

table.

3-inch CD

5-inch CD/CDV

8-inch LD

12-inch LD

CD/CDV: With the labeled side up

LD: With the desired side's label up

Start playback.

PLAY

• With CDV discs, the video part is

played first.

• With two-sided LDs, after the A

side of the disc (the side facing

upward) is played, a still frame is

displayed and then the unit

automatically begins playing the B

side.

To avoid malfunctions, be especially careful about the following

points.

• Do not place any object other than a disc on the disc table.

• Do not move the player while a disc is playing. This will cause the

disc to be scratched.

Precautions concerning disc loading

• Do not place more than one disc on the disc table. If two discs are

placed one on top of the other on the disc table, discs may be

scratched and/or a malfunction may occur.

• With this unit, playback of all types of discs is carried out without

the use of adaptors. Therefore, do not use any type of adaptor with

this unit.

• With CDs, CDV discs, and single-sided LDs, always be sure to load

discs with the label side facing upward.

Lest Memory function:

If the power is turned off during LD playback, a playback position

slightly ahead of the current frame isstored in the unit's memory (Last

Memory). When the power is turned back on and playback begins

from the memorized position by pressing _/=,-_<.

To play and listen to a disc without connecting this unit to an

audio system:

Plug headphones into the PHONES jack on the front panel of this unit

and adjust the volume with LEVEL control.