Manual

CONNECTIONS . Only televisions equipped with a video input u_. be connected to this unit.
USING TELEVISION WITH AUDIO AND VIDEO JACKS
Player, stereo system, monitor television ]
@
When connection S VIDEO jack,
insert the plug with care.
Forcing the plug into the jack
with the wrong orientation may
jack.damagetheplugand/°rthe••_iiaiamaamAUdiocord_IO_O_I
Stereo amplifier
UHF television
antenna
VHF television
antenna
1
Audio cable
__ECK SYNCHRO jack
To power outlet
• Connection only after all other
connections have been made.
Video cord
I
foo i
IIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII|IIIIII !
S-VIDEO cable
JCV-103 (sold separately)
S-video input
• Connect the VIDEO OUT jack of the player to the video
input jack of the minitor television.
• When connecting to IV equipped with the S-Video input
jack, the S-VIDEO connection is recommended to obtain
superior picture quality.
• Connect the AUDIO OUT jacks to the stereo amplifier
AUX, CD, LD, VDP or other jacks, except the PHONO
input jacks. The television speakers can also be used by
connecting the television audio input jacks and the player
AUDIO OUT jacks. However connection to a stereo
amplifier is recommended to obtain superior audio
playback quality for Compact Discs and LaserDiscs. Do
not change the television antenna and VCR connections.
• Connect the power cord to an AC wall outlet.
• Combined system control is possible when a Pioneer
television and audio/video stereo receiver are connected.
Refer to page 13 and 14 for an explanation of the
connection procedure.
• _hen making conuections to stereo amplifier equipped
with a bui_t-in D/A converter and an optical dlgita_ iack,
refer to the connection instructions on the page 12.
CD-DECK synchro function
If you have a Pioneer cassette deck provided with the CD-
Deck synchro funciton, connect the CDoDECK SYNCHRO
jacks of the player and cassette deck. With this function,
synchro recording can be carried out between player and
deck.
• With CD as well as CDV and LD, the CD-Deck synchro
recording can be carried out.
• For details on connections and operation, refer to the
operating instructions supplied with the cassette deck.
rAC-3 RF OUT terminal
This terminal is intended for use with Dolby AC-3
components ('1) planned for future release. With this
terminal, you will be able to connect an AC-3 RF input of
amplifiers and surround processors, and playback laser
discs formatted with Dolby AC-3 (*2).
('1) Indicated with _ (For hardware)
(*2) Indicated with _q_;_ (For software)
eYou cannot playback currently available laser
discs, laser disc players, AV amplifiers, etc.,
with this terminal.
eE)o r_ot connect th'lS terminals to the audio
input terminal of normal stereo or A'q
\i_iers. 1"1
<VRB1142>