Manual

CONNECTIONS

Connection of additional stereo amplifier

This connection scheme shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV using the

scheme shown on page 8.To reproduce the audio of a Compact Disc or an LaserDisc with improved quafity, it is recommended to connect the

player to a stereo amplifier.

Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input

jacks.)

• Also read the operating instructions of your stereo amplifier.

Plug into a

outlet after

completing all

connections.

Commercially- __

available

audio cord

Commercially-available mini-plug cord (without load)

.immmi i lmm ml=_

Commercially-available '_

•,. optical cable

Stereo amplifier

CONTROL OUT jack

(PIONEER stereo amp)

• Combination with a PIONEER component with the _ mark

When the player is combined with a component capable of centralized control of PIONEER products carrying the _ mark (optional AV

surround amplifier, etc.), it is possible to control the entire system.

Using a resistorless cord with mini-plugs (without load) on both ends that is available in audio stores, connect the CONTROL IN jack of the

player to the CONTROL OUT jack of the component.

• For the connection and operation methods, read the operating instructions of the component to be connected.

• Once the system remote control connection is made, the remote control sensor of the player will not accept the remote control.

The remote control unit should be pointed at the remote control sensor of the connected component.