Manual

ManualsBrandsPioneer ManualsAudio EquipmentOfficial Pioneer cd, cdv & ld player

CONNECTIONS

Connection with TV set with Video/Audio

equipped inputs

Connection method (Be sure to plug the cords securely deep into the connectors.)

Connect the VIDEO OUTjack of the player to the video input jack of an A/V TV (or a TV monitor).

• If the TVset has an S VIDEO input jack, connect it using an S VIDEO cable which is available in audio/video stores.

For use of the S VIDEO cable, also read the operating instructions of the T_,

Connect the AUDIO OUT jacks of the player to the audio input jacks of the A/V TV.

Finafly plug the power cord into a household power outlet (which should permanently be supplied with power).

• Also read the instruction manual of the TV.

• ATTENUATOR switch

Usually, set this switch to the OFF position.

Set to ON when the audio is distorted during karaoke

singing.

LO,F o.j

Usually OFF

@ml=

i O_ Check the

positions

•_ the holes of

i _ the S VIDEO

r_ _ !ack before

I I _ insertion.

I _ S VIDEO plug

• m= i IwmB=lRmn llm= =mmml_ml =mml==

Commercially-available _

S VIDEO cable S VIDEO input jack

Provided Video cord

_, , VIDEO input jack

Plug into a wall

outlet after

completing all

connections.

Provided Audio cord

AUDIO inputjack (mono TV)

AUDIO input jacks (AN TV)

AC-3 RF OUT terminal:

This terminal is intended for use with Dolby AC-3 compo-

nents (.1) planned for future release. With this terminal,

you will be able to connect an AC-3 RF input of amplifiers

and surround processors, and playback laser discs for-

matted with Dolby AC-3 (*2),

(.1) Indicated with .1_,_ (For hardware)

(*2) Indicated with .1_,_ (For software)

• You cannot playback currently available laser discs,

laser disc players, AV amplifiers, etc., with this termi-

nal.

• Do not connect this terminals to the audio input terml-

nal of a normal stereo or AV amplifiers.