Manual

CORRECTION
INCORRECT
fAt-3 RF OUT terminal -"
This terminal is intended for use with Dolby AC-3
components (.1) planned for future release. With this
terminal, you will be able to connect an AC-3 RF input of
amplifiers and surround processors, and playback laser
discs formatted with Dotby AC-3 (.2).
(.1) Indicated with _ (For hardware)
(*2) Indicated with _,._,, (For software)
• You cannot playback currently available laser
discs, laser disc players, AV amplifiers, etc.,
with this terminal.
• Do not connect this terminals to the audio
input terminal of a normal stereo or AV
amplifiers. AC-3_FOUT
Terminal j
CORRECT
_AC-3 RF OUT terminal
This terminal is intended for use with Dolby AC-3
components (.1) planned for future release. With this
terminal, you will be able to connect an AC-3 RF input of
amplifiers and surround processors, and playback laser
discs formatted with Dolby AC-3 (.2).
(*1)Indicated with .._,,_._ (For hardware)
(*2) Indicated with _,, (For software)
• You cannot playback currently available laser
discs, laser disc players, AV amplifiers, etc.,
with this terminal.
• Do not connect this terminals to the audio
input terminal of a normal stereo or AV
amplifiers. Ac-3R_out
/ermlnaf .j
"Dolby', "AC-3" and the double-D symbol are trademarks
of Dolby Laboratories Licensing Corporation.
<VRX1008-A>