Manual

PROGRAMMED PLAYBACK (PLAYING CHAPTER/TRACKS BY
CHANGING THEIR ORDER AS REQUIRED)
Desired chapters (LD) or tracks (CDV/CD) can be programmed to
be played in a desired order. Up to 24 chapters/tracks can be
programmed at a time.
• Programming operation can be made easier by observing the
on-screen display or display window during operation.
1
r
1. Press PGM.
PGM
2. Select the chapters or tracks to be pro-
grammed.
<With a double-sided LD>
Example ' Programming chapter 9 on side B, chapter 7
on side A and then chapter 18 on side B
(_) Select side A or B.
@ Specify the chapter number.
0
• Program the next chapter by repeating steps (_) and
@ above.
^
<With a single-sided LD, CD or CDV>
Example ' Programming CD tracks 9, 7, and then 18
• Press numeric buttons 9, 7, +10, and then 8.
If you press a wrong numeric button :
Press CLEAR, then press the correct numeric button{s).
3. Press )-.
PLAY
Programmed playback starts after searching the first pro-
grammed track/chapter. In the examples above, the pro-
grammed playback starts from chapter/track No. 9. When
chapter/track Nos. 9, 7, and then 18 have been played,
the player enters stop mode.
J Programming of pause J
Programming pauses together with chapter/track numbers is very
convenient for recording the programmed playback.
• In case of recording the programmed playback on two sides of
an audio tape, it is recommended to program a pause after the
last chapter/track to be recorded on the first side of the tape.
This makes it possible to flip the tape while playback is paused
and avoid making a recording mistake.
• While programmed playback is paused, it is possible to record a
narration or create a non-recorded blank. Pressing II in pause
mode resumes programmed playback so that recording can be
restarted.
• It is not possible to record a pause as the final step of the
program.
I Indication of programmed pause J
"11" appears on the TV screen and "PA" appears on the display
window,
[ To check the programmed contents I
When PGM is pressed during or after programmed playback, the
programmed contents can be displayed on the TV screen. Press-
ing PGM again turns off the display of the programmed contents.
[ To modify programmed content ]
To delete a programmed chapter number, track number or pause :
1. Press PGM.
2.
3,
Press either _ or _ to move _ (the cursor) to the chap-
ter number, track number or pause to be modified.
If you want to replace that content, press the numeric button. If
you want to program a pause, press II.
If you want to clear content, press CLEAR.
Press PGM to complete.
If you press I_ in place of PGM, programmed playback starts
from the first programmed chapter or track.
It is not possible to replace or clear the chapter or track being
played.
I To clear the entire program I
• Open the disc table.
• Press CLEAR in stop mode.
• When CLEAR is pressed during playback, the programmed play-
back is canceled and normal playback starts. Pressing CLEAR
again also clears the programmed contents.
22
<VRB1148>