Operation Manual

DRB1527-B
En
12
12
Part names and functions
Control panel
1 PLAY/PAUSE f (page 19)
Use this to play/
pause tracks.
During playback, the indicator lights.
When in the pause mode, the indicator flashes.
2 CUE (page 19)
Use this to set and check cue points.
When a cue point is set, the indicator lights.
When in the pause mode, the indicator flashes.
3 SEARCH m, n (page 19)
The track is forwarded/
reversed while the button is held in.
4 TRACK SEARCH o, p (page 19)
Use these to search for the beginnings of tracks.
5 DIRECTION REV (page 19)
Use this to turn reverse playback on and off.
6 RELOOP/EXIT (page 21)
Use this to return to loop playback (reloop) or cancel loop playback
(loop exit).
7 LOOP OUT (OUT ADJUST) (page 20)
Use this to set and fine-adjust the loop out point.
8 LOOP IN/
CUE (IN ADJUST) (page 20)
Use this to set and fine-adjust the loop in point.
9 BEAT SELECT (page 21)
Use this to set the number of beats for auto beat loop playback.
a AUTO BEAT LOOP (1, 2, 4, 8) (page 21)
Use these to set the loop automatically according to the track’s
tempo (auto beat loop).
b USB STOP (page 16)
Press for at least 2 seconds before disconnecting the USB device.
c USB indicator (page 16)
This flashes when this unit is communicating with the USB device.
d USB device insertion slot (page 16)
Load the USB device here.
e DISC (page 19)
Press this to play the music files on a CD or CD-ROM.
f USB (page 19)
Press this to play the music files on a USB device.
g PC (page 23)
Press this to use DJ software.
h TIME MODE (AUTO CUE) (page 20)