Multi Player CDJ-900/CDJ-2000 TRAKTOR Series Connection Guide
Introduction The CDJ-900 and CDJ-2000 are equipped with a special interface that enables high-precision control for the TRAKTOR series of software manufactured by Native Instruments. Connecting these products to the TRAKTOR series provides free operation of the series without the use of a control disc. These products can also be used as audio output devices for the TRAKTOR series. These guidelines explain the basic operations when the products are connected to the TRAKTOR series.
Connecting up to the TRAKTOR Series Preparations • Upgrade the firmware of the Multi Player (CDJ-2000/900) to the most up-to-date version (3.10 or higher). Refer to our website (http://pioneerdj.com) for details on upgrading the firmware. • Upgrade the TRAKTOR series to the most up-to-date version (TRAKTOR 1.2.3 or higher.) Upgrade Method: Refer to the Native Instruments website (http://www.native-instruments.com/) for details on operating environments. • One USB cable is required for each Multi Player.
Connections Connect the Multi Player (or players, if more than one are to be connected*) to the computer with the use of a USB cable. *Up to 4 Multi Players can be connected to the TRAKTOR series.
Using Multi Players as TRAKTOR Series Controllers Switch on the power to all units once the connections have been made. Then, set up the Multi Players in accordance with the following procedures.
Operating the TRAKTOR Series with Multi Player Buttons The default settings are shown below.
■ CDJ-2000 bm bl bk bn bp bq br bo UTILITY BROWSE TAG LIST INFO BACK OFF ON POWER LINK LOCK DISC EJECT SD DISC SD VINYL SPEED ADJUST TOUCH / BRAKE IN / CUE OUT RELOOP/ EXIT LOOP 7 6 5 AUTO CUE HOT CUE 8 IN ADJUST OUT ADJUST NEEDLE SEARCH CUE / LOOP CALL RELEASE / START JOG ADJUST LOOP CUTTER LIGHT HEAVY VINYL CDJ DIRECTION JOG MODE 10 16 WIDE REV MASTER TEMPO TRACK SEARCH cn co SEARCH 3 2 cl cm TEMPO 6 FWD 4 bs bt ck DELETE MEMORY 4-BEAT LOOP REC / CALL cp
Using Multi Players as TRAKTOR Series Audio Output Devices Set up the computer and TRAKTOR series in accordance with the following procedures. When Using Windows®(supported OS*: Windows 7, Windows Vista®, Windows XP) 1 Install the [Pioneer_CDJ_Driver] driver software into the computer. Either install [Pioneer_CDJ_Driver] from the CD-ROM supplied with the Multi Player, or download the latest edition from the following website. http://pioneer.jp/support/download/index-e.
■ When Using the Mac OS X 10.6.X 1 Connect the Multi Player (or players, if more than one are to be connected) to the computer with the use of a USB cable. 2 3 4 Start up [AUDIO MIDI Settings] from the [Applications]–[Utilities] folder. 5 6 Click [+] on the [Audio Device] screen to add the new Device settings. Select the added Device setting, and then add a tick to [CDJ-900] or [CDJ-2000] to it for the required number of Multi Players.
Published by Pioneer Corporation. Copyright © 2010 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.
