User manual

CD recording doesn’t stop
though the record progress indi-
cator shows 100 %.
Music Library recording will be can-
celed after playback of the current
track is finished. (The recording
mode stops at the interval of the
tracks.)
Wait until the current track has ended or
change the source manually.
“NO SIGNAL” is displayed at the
right corner on the map.
While waiting for a response from
the XM tuner.
Wait for a while and try the operation again.
You are in an area that cannot re-
ceive XM tuner reception.
Move into an area that can receive XM tuner
reception.
Your current location provides very
poor reception.
Change your location.
“UPDATING” is displayed at the
right corner on the map.
Service subscription is either
XM
audio only or XM NavTraffic stand
alone.
Since the GEX-P10XMT is capable of receiving
both XM audio and XM NavTraffic service, if
you are subscribed to only one or the other,
the system checks to see if you have added
another service to your account since you
last powered on the navigation system. When
you subscribe to both services, this message
will stop appearing when you turn the ignition
ON (ACC ON).
No sounds are heard.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-video.
There is no sound during still, slow motion, or
frame-by-frame playback with DVD-video.
The system is paused or performing,
fast rewind or forward during the
MP3 disc playback.
For an MP3, there is no sound on fast rewind
or forward.
“DTS” is selected for the DVD-Video
disc sound track.
Switch to a non “DTS” sound track.
The icon
is displayed, and op-
eration is not possible.
The operation is not compatible
with the DVD’s configuration.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the unit cannot be operated.
Reading of data has become impos-
sible during DVD playback.
After touching g once, start playback once
more.
The picture is stretched, the as-
pect is incorrect.
The aspect setting is incorrect for
the display.
Select the appropriate setting for that image.
(Page 149, Page 148)
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock is on. Turn parental lock off or change the level.
(Page 148)
Parental lock for DVD playback
cannot be canceled.
The code number is incorrect. Input the correct code number. (Page 148)
Playback is not with the audio
language and subtitle language
settings selected in [DVD-V
Setup].
The DVD playing does not feature
dialog or subtitles in the language
selected in [DVD-V Se tup].
Switching to a selected language is not possi-
ble if the language selected in [DVD-V
Setup] is not recorded on the disc.
Appendix
En
178
Appendix