Data Sheet

CONFIDENTIAL
BDR-209EBK October 29, 2013
Revision 1.00 JB-U0395/JB-K0520
13 / 28
6.3. Shock
Drive condition
Drive conditionDrive condition
Drive condition Test item
Test itemTest item
Test item Test Condition
Test ConditionTest Condition
Test Condition Criteria
CriteriaCriteria
Criteria
Operation
Acceleration 1G peak
No error occurs during the
operation.
Nor error is found during
the operation after this test.
Pulse 11 msec (half-sine)
Number of
pulse
10 times x 10 sec
interval 6 directions
Non-Operation
<Half-sine>
Acceleration 150 G
No damage is found on the
drive after this test
Pulse 3 msec
Number of
pulse
1 pulse
(in 6 directions)
Non-Operation
<Square wave>
Acceleration 60 G
No damage is found on the
drive after this test
Pulse 180 inch/sec
Number of
pulse
6 directions
Transportation
(packaging
condition)
Height 70 cm
The test is done with
packaging condition.
No damage is found on the
drive after this test
The drive works normally
after this test.
Direction
1 corner, 3 edges, 6
faces
6.4. ESD (Electro Static Discharge Susceptibility)
Drive condition
Drive conditionDrive condition
Drive condition Test
Test Test
Test Item
ItemItem
Item Test Condition
Test ConditionTest Condition
Test Condition Criteria
CriteriaCriteria
Criteria
Operation
Voltage
+/- 4 kV (contact)
+/- 10 kV (in air)
Standard: IEC61000-4-2
No drive error.
Charge
Capacitor
150 pF
Discharge
Resistor
330 ohm
Non-Operation
Voltage
+/-8 kV (contact)
+/- 15kV (in air)
Standard: IEC61000-4-2
No hardware damage.
Charge
Capacitor
150 pF
Discharge
Resistor
330 ohm