User Manual

21
En
03
Switching the output
video resolution
Use the procedure below to switch the output video
resolution from the various video output terminals.
 Press HDMI.
• The current output video resolution setting is
displayed on the player’s front panel display.
To switch the output video resolution, press HDMI
again.
• The output video resolution setting can also be
switched by selecting Resolution from the Initial
Setup menu (page 38).
Caution
• On some devices (TV, AV receiver or amplifier, etc.),
the video or audio may not be output properly when
the resolution is switched. If this happens, use HDMI
to set a resolution at which the video and audio are
properly output.
• When video signals are being output with a resolution
of 4K/24p, 1080/50i, 1080/50p, 720/50p, 1080/24p,
1080/60i, 1080/60p or 720/60p from the HDMI OUT
terminals, the picture may be output with an aspect
ratio of 16:9, even if the TV Aspect Ratio is set to 4:3
(Standard).
• The picture may not be displayed for a while when the
resolution is switched.
• When the connected device supports 3D and if a 3D
Disc is played back, the 3D output is prioritized for
output, regardless of the resolution settings. Also,
switching of resolution may not be possible while the
3D contents are playing.
• When Auto is selected, the picture is output at 60
frames/second if your TV is not compatible with 1080/
24p signals.
• When 4K/24p, 1080/24p is selected, the signals are
output as such, even if your TV is not compatible with
4K/24p or 1080/24p signals. If the picture is not
displayed properly, use HDMI to set an output video
resolution at which the video and audio signals are
properly output.
• When the unit is set to [Auto] and is playing 24p
content, the TV outputs the content at 4K/24p, if the
TV you are using supports 4K/24p output. If the
connected television set does not support 4K/24p,
then the output is made with a recommended
resolution other than 4K/24p.
• When the Resolution is set to Auto, 1080p, 4K/24p
and if the resolution of output from the HDMI is
1080p, 4K/24p, then output may not occur depending
on the HDMI cable in use.
• There are resolutions that cannot be output
depending on the television set in use.
BDP-180_72-BDP180-GBRB1_En.book Page 21 Friday, April 17, 2015 3:15 PM