User manual

ManualsBrandsPioneer ManualsBlu-Ray PlayersBDP-X300

Connecting by Miracast

You can connect to your mobile device if it has Miracast

function in conformity with Wi-Fi standards.

Press Miracast to display the Miracast/Wi-Fi Direct

mode screen.

• As for Miracast, some of the functions have different

names depending on the mobile device. For details,

refer to the instruction manual for the mobile device.

1 Turn on the Miracast setting on your mobile

device.

A list of the devices that can be connected to the mobile

device is displayed on the mobile device screen.

2 Select the device name “DIRECT-xxBD/BDP-X300”

for the unit appearing on the TV screen from the list

displayed on your mobile device.

“xx” indicates the device’s identification number.

Caution

• If the name of the unit “DIRECT-xxBD/BDP-X300”

does not appear on your mobile device, press

RETURN

on the remote control and then

Miracast

and perform the controls again from the

Miracast/Wi-Fi Direct mode screen.

If the connection is successful, the screen of the mobile

device is also displayed on the TV.

Note

• For instructions on operating your mobile devices,

see their respective operating instructions.

Connect to device not

compatible with Miracast/Wi-Fi

Direct

Normally connect using the procedure below.

1 Display the Miracast/Wi-Fi Direct mode screen.

2 At the Wi-Fi network settings on your mobile

device, select this unit's device name, as displayed

on the TV screen ("DIRECT-xxBD/BDP-X300").