Blu-ray Disc Player Operating Instructions

ManualsBrandsPioneer ManualsDVD PlayerBDP-V6000

Blu-ray Disc PLAYER

BDP-V6000

Operating Instructions

V6000_CUXJ_EN.book 1 ページ２００９年６月５日　金曜日　午前１１時５７分

Summary of content (76 pages)

PAGE 1
V6000_CUXJ_EN.
PAGE 2
V6000_CUXJ_EN.book 2 ページ２００９年６月５日金曜日午前１１時５７分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
PAGE 3
V6000_CUXJ_EN.book 3 ページ２００９年６月５日金曜日午前１１時５７分 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
PAGE 4
V6000_CUXJ_EN.book 4 ページ２００９年６月５日金曜日午前１１時５７分 If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. If connected to an AC outlet, the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal.
PAGE 5
V6000_CUXJ_EN.book 5 ページ２００９年６月５日金曜日午前１１時５７分 We Want You Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
PAGE 6
V6000_CUXJ_EN.book 6 ページ２００９年６月５日金曜日午前１１時５７分 Contents 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Putting the batteries in the remote control. . . . . . . . . . 7 Software updating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Types of discs/files that can be played. . . . . . . . . . . . . . . 8 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Playable files . . . . . . . . . . . . . . .
PAGE 7
V6000_CUXJ_EN.book 7 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 1 01 Before you start What’s in the box • Remote control x 1 • Video/audio cable (yellow/white/red plugs) x 1 • Do not use any batteries other than the ones specified. Also, do not use a new battery together with an old one. • When loading the batteries into the remote control, set them in the proper direction, as indicated by the polarity marks ( and ).
PAGE 8
V6000_CUXJ_EN.book 01 8 ページ２００９年６月５日金曜日午前１１時５７分 Types of discs/files that can be played Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played.
PAGE 9
V6000_CUXJ_EN.book 9 ページ２００９年６月５日金曜日午前１１時５７分  Discs that cannot be played • HD DVDs • DVD Audio discs • DVD-RAM discs • SACDs • Video CDs • SVCDs It is possible that some discs other than the ones listed above may not be playable either. Note • Some discs cannot be played, even if one of the logo marks on the previous page is indicated. • To play 8 cm discs, set the disc in the 8 cm disc depression in the center of the disc tray. No adapter is necessary. 8 cm BD-ROMs cannot be played.
PAGE 10
V6000_CUXJ_EN.book 01 10 ページ２００９年６月５日金曜日午前１１時５７分 With BD-ROMs, it is possible to use BD-J (Java) applications to create highly interactive titles, for example including games.  Playing CDs Regarding copy protected CDs: This player is designed to conform to the specifications of the Audio CD format. This player does not support the playback or function of discs that do not conform to these specifications.
PAGE 11
V6000_CUXJ_EN.book 11 ページ２００９年６月５日金曜日午前１１時５７分  Supported audio file formats • Windows Media™ Audio 9 (WMA9) Bit rate: Up to 192 kbps Sampling frequencies: 22.05 kHz, 32 kHz, 44.1 kHz and 48 kHz Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
PAGE 12
V6000_CUXJ_EN.book 01 12 ページ２００９年６月５日金曜日午前１１時５７分 7 VIDEO SELECT – (page 26) 8 HOME MEDIA GALLERY – (page 36) 9 TOP MENU – Press to display the top menu of the BDROM or DVD-Video. 16 FL DIMMER – When pressed, the brightness of the player’s front panel display and the status of the indicators on the player’s front panel changes. 10 /// – Use to select items, change settings and move the cursor. ENTER – Press to execute the selected item or enter a setting that has been changed, etc.
PAGE 13
V6000_CUXJ_EN.book 13 ページ２００９年６月５日金曜日午前１１時５７分 Front Panel Display 01 1 2 3 4 5 HD LAN PQLS 24HZ 50HZ 60HZ CONTROL EXT 9 8 7 6 1  – (page 29) 4 LAN – (page 22) 2  – (page 29) 5 PQLS – (page 19) 3 HD – This lights when an HDMI cable is connected and video signals are being output with a resolution of 1080/60i, 1080/60p, 720/60p, 1080/50i, 1080/50p, 720/ 50p or 1080/24p.
PAGE 14
V6000_CUXJ_EN.book 02 14 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 2 Installation Cautions on use • Please note that Pioneer will accept no responsibility whatsoever for loss of business opportunities or other damages due to breakdown of the set. • Please note that Pioneer will accept no responsibility whatsoever for problems resulting from the use of the set, regardless of the method of installation.
PAGE 15
V6000_CUXJ_EN.book 15 ページ２００９年６月５日金曜日午前１１時５７分 Moving the player When using chemical-impregnated wipes, etc., read the wipe’s cautions carefully. If you need to move this unit, first remove the disc if there’s one loaded, and close the disc tray. Next, press  STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel display goes off. Wait at least 10 seconds. Lastly, disconnect the power cord.
PAGE 16
V6000_CUXJ_EN.book 02 16 ページ２００９年６月５日金曜日午前１１時５７分  Specially shaped discs Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be used on this player. Never use such discs, as they will damage the player. 3 Mount the rack mount brackets. Mount the rack mount brackets to the screw holes in the sides of the player using the screws removed from the player in step 2 (two screws on each side).
PAGE 17
V6000_CUXJ_EN.book 17 ページ２００９年６月５日金曜日午前１１時５７分 4 Mount the underplate. Insert the underplate between the left and right rack mount brackets, then mount with the included gray screw. 5 Mount the set on the rack. Check that the screws fastened in step 3 are securely tightened.
PAGE 18
V6000_CUXJ_EN.book 03 18 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 3 Connecting up Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. After connecting, make the settings at the Setup Navigator menu according to the type of cable connected (page 23). capabilities, allowing natural colors to be reproduced more faithfully than ever. “x.v.
PAGE 19
V6000_CUXJ_EN.book 19 ページ２００９年６月５日金曜日午前１１時５７分 • The following restrictions apply when HDMI High Speed Transmission is set to Off: – Deep Color signals are not output. – If the output video resolution is set to Auto, the signals are output with a resolution of 1080/60i or 1080/50i when TV’s preferred resolution is 1080/60p or 1080/50p.
PAGE 20
V6000_CUXJ_EN.book 03 20 ページ２００９年６月５日金曜日午前１１時５７分 terminal using an HDMI cable, and when the player is set as follows (page 44): HDMI Audio Out: PCM KURO LINK: On PQLS: Auto • Also refer to the operating instructions of AV receiver or amplifier. • Please see the Pioneer website for AV receivers or amplifiers that support the PQLS function. Connecting a TV See Connecting an AV receiver or amplifier below to connect an AV receiver or amplifier using an HDMI cable.
PAGE 21
V6000_CUXJ_EN.book 21 ページ２００９年６月５日金曜日午前１１時５７分 Connecting video and audio cables Connecting an AV receiver or amplifier using audio cables 03 When connecting to a 7.1-channel compatible AV receiver or amplifier – Connect using 4 audio cables (diagram below). Note • Make the settings in the Setup Navigator menu according to the type of cable connected (page 23).
PAGE 22
V6000_CUXJ_EN.book 03 22 ページ２００９年６月５日金曜日午前１１時５７分 Network connection Note • Devices formatted with a file system other than the above cannot be used. Such devices may however be usable if they are formatted from the player. • External storage devices may not be recognized if they contain multiple partitions. • Some external storage devices may not operate with this player. • Operation of external storage devices (USB memory devices, external hard disks, etc.) is not guaranteed.
PAGE 23
V6000_CUXJ_EN.book 23 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 4 04 Getting Started Making settings using the Setup Navigator menu 3 Select the OSD language. Use / to select, then press ENTER. Setup Navigator BD PLAYER Please select the on-screen display language. Be sure to perform these settings when using the player for the first time. Caution • Before turning on the power, check that the connections between the player and other devices are correct.
PAGE 24
V6000_CUXJ_EN.book 04 24 ページ２００９年６月５日金曜日午前１１時５７分 – When connecting using component video cables or a video cable to watch the picture, connect to an AV receiver or amplifier, or a TV using either analog audio cables (7.1 channels or 2 channels), an optical digital audio cable (page 21). – To listen to audio with the player connected to an AV receiver or amplifier with an HDMI cable, connect the TV to the AV receiver or amplifier using an HDMI cable (page 20).
PAGE 25
V6000_CUXJ_EN.book 25 ページ２００９年６月５日金曜日午前１１時５７分 Note • The factory setting is 00 (PIONEER). • If you make a mistake when inputting the code, release TV CONTROL  then start over from the beginning. • When there are multiple codes for a manufacturer, try inputting them in the indicated order until the TV can be operated. 2 Check that the TV can be operated. Operate the TV using TV CONTROL.  – Press to turn the TV’s power on and off. INPUT SELECT – Press to switch the TV’s input.
PAGE 26
V6000_CUXJ_EN.book 04 26 ページ２００９年６月５日金曜日午前１１時５７分 Using the TOOLS menu Various functions can be called out according to the player’s operating status. Item Description Now Playing Display the playback screen of the currently playing track or file. Original/Play List Switch the DVD-R/-RW’s (VR format) list screen between the original list and the playlist. Add to HMG Playlist Add the selected track or file to the HMG Playlist (page 37).
PAGE 27
V6000_CUXJ_EN.book 27 ページ２００９年６月５日金曜日午前１１時５７分 Switching the output video resolution Use the procedure below to switch the output video resolution from the various video output terminals. Caution • On some devices (TV, AV receiver or amplifier, etc.), the video or audio may not be output properly when the resolution is switched. If this happens, use OUTPUT RESOLUTION to set a resolution at which the video and audio are properly output.
PAGE 28
V6000_CUXJ_EN.book 04 28 ページ２００９年６月５日金曜日午前１１時５７分  About the output video resolution The output video resolution setting and the resolution of the picture that is actually output differ for the different terminals. See the table below.The table below shows the output video resolution for the different terminals when the frame/field frequency of the playback source is 50 Hz on the upper line, the resolutions when the source’s frame/field frequency is 60 Hz and 24 Hz on the lower line.
PAGE 29
V6000_CUXJ_EN.book 29 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 5 05 Playback Playing discs or files This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 8. For the types of files that can be played, see Playable files on page 10. Image and audio files recorded on discs are played with the Home Media Gallery (page 36). STANDBY/ON OPEN/CLOSE CH AUDIO SUBTITLE • DVD-Video discs have parental lock features.
PAGE 30
V6000_CUXJ_EN.book 05 30 ページ２００９年６月５日金曜日午前１１時５７分 Forward and reverse scanning  During playback, press  or . • The scanning speed switches each time the button is pressed. The speed steps depend on the disc or file (the speed is displayed on the TV screen). Switching the camera angles For BD-ROM and DVD-Video discs on which multiple angles are recorded, the angles can be switched during playback.  • Forward or reverse scanning is also possible by holding the button down.
PAGE 31
V6000_CUXJ_EN.book 31 ページ２００９年６月５日金曜日午前１１時５７分 Switching the audio and secondary audio  Turning the Secondary Video off For discs or files on which multiple audio streams/ channels are recorded, audio streams/channels can be switched during playback. Also use this procedure to switch the secondary audio for BD-ROMs on which secondary audio is recorded. Displaying the disc information  During playback, press AUDIO.
PAGE 32
V6000_CUXJ_EN.book 05 32 ページ２００９年６月５日金曜日午前１１時５７分 Playback functions The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below.
PAGE 33
V6000_CUXJ_EN.book 33 ページ２００９年６月５日金曜日午前１１時５７分 Using the Play Mode functions Playing a specific title, chapter or track (Search) 05 1 Press PLAY MODE to display the Play Mode screen. The Play Mode screen can also be displayed by selecting Play Mode from the TOOLS menu. 2 Select the type of search. Use / to select, then press ENTER. ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO See the table on page 35 for the search types.
PAGE 34
V6000_CUXJ_EN.book 05 34 ページ２００９年６月５日金曜日午前１１時５７分 Note • A-B Repeat play is canceled in the following cases: – When the angle is switched (for BD-ROM and DVDVideo discs only). – When you search outside the repeat range. – When you start other Repeat Play or Random Play. Playing repeatedly (Repeat Play) Use this procedure to play the currently playing disc, title, chapter, track or file repeatedly. 1 During playback, press PLAY MODE to display the Play Mode screen.
PAGE 35
V6000_CUXJ_EN.book 35 ページ２００９年６月５日金曜日午前１１時５７分 About Play Mode types 05 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. Disc/file type Play Mode type Repeat Play Random Play Search 1. 2. 3. 4. 5. 6.
PAGE 36
V6000_CUXJ_EN.book 05 36 ページ２００９年６月５日金曜日午前１１時５７分 Playing from the Home Media Gallery The Home Media Gallery lets you display a list of the titles, tracks or files recorded on the disc. The discs that can be played from the Home Media Gallery are as shown below (see also page 8). • BD-R/-RE discs • DVD-R/-RW (VR format) discs • Audio CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which only data files of image or audio files, etc.
PAGE 37
V6000_CUXJ_EN.book 37 ページ２００９年６月５日金曜日午前１１時５７分  Rotating images  Adding tracks/files  Press ANGLE while playing a slideshow. • The image rotates each time the button is pressed (90°  180°  270°  0°  ... ). The image can also be rotated by selecting Rotate from the TOOLS menu. Use this procedure to add tracks and files, and create the HMG Playlist. Playing audio files 1 Press HOME MEDIA GALLERY to display the Home Media Gallery.
PAGE 38
V6000_CUXJ_EN.book 05 38 ページ２００９年６月５日金曜日午前１１時５７分  Playing the HMG Playlist 1 Press HOME MEDIA GALLERY to display the Home Media Gallery. The Home Media Gallery can also be displayed by selecting Home Media Gallery from the Home Menu pressing ENTER. 2 Select HMG Playlist. Use / to select, then press ENTER. 3 Select the track/file to be played. Use / to select, then press ENTER. Playback starts from the selected track/file, and continues until the end of the list is reached.
PAGE 39
V6000_CUXJ_EN.book 39 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 6 06 Adjusting audio and video Adjusting the video The quality of the playback picture can be adjusted according to the TV you are using. TOOLS TOP MENU ENTER HOME MENU RETURN PLAY PREV PAUSE STOP NEXT RED GREEN BLUE YELLOW VIDEO ADJUST 1 During playback, press VIDEO ADJUST to display the Video Adjust screen. The Video Adjust screen can also be displayed by selecting Video Adjust from the TOOLS menu. 2 Select a preset.
PAGE 40
V6000_CUXJ_EN.book 40 ページ２００９年６月５日金曜日午前１１時５７分 • Prog.Motion is disabled when Pure Cinema is set to On. 06 Note • This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby Digital audio signals of BDs and DVDs. • Black Setup has the effect only for pictures output from the VIDEO output terminals and signals output with a frame/field frequency of 60Hz. • When Auto is selected, the setting has the same effect as High or Off for Dolby TrueHD signals, depending on the content.
PAGE 41
V6000_CUXJ_EN.book 41 ページ２００９年６月５日金曜日午前１１時５７分 – Channel Level is set to Fix (page 43).  Closing the Channel Level screen Press 06 HOME MENU. Adjusting the audio delay (Lip Sync) Adjust the audio delay for the selected video output terminal if the video and audio are not synchronized. 1 During playback, display the TOOLS menu. Press TOOLS. 2 Select and set Audio Adjust. Use / to select, then press ENTER. 3 Select and set Lip Sync. Use / to select, then press ENTER.
PAGE 42
V6000_CUXJ_EN.book 07 42 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 7 Detailed settings Changing the settings Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU 2 Select and set Initial Setup. Use / to select, then press ENTER. 3 Select the item and change the setting.
PAGE 43
V6000_CUXJ_EN.book 43 ページ２００９年６月５日金曜日午前１１時５７分 Video Out Setting Options Explanation NTSC on PAL TV On Select this when a TV that only supports PAL is connected. The picture is displayed correctly when playing a disc recorded with a frame/field rate other than 50 Hz. Off Select this when connected to an NTSC-compatible TV. 07 • Many recent PAL TVs support the input of NTSC signals, in which case this can be set to Off. Also check your TV’s operating instructions.
PAGE 44
V6000_CUXJ_EN.book 07 44 ページ２００９年６月５日金曜日午前１１時５７分 HDMI Setting Options Explanation HDMI High Speed Transmission On Select this when connected with a High Speed HDMI™ cable (page 18). Off Select this when connected with a Standard HDMI™ cable (page 18). The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High Speed Transmission setting.
PAGE 45
V6000_CUXJ_EN.book 45 ページ２００９年６月５日 Setting 金曜日 Options Language Subtitle Language English * For some discs, it may not be possible to change to the available languages selected language. Other 午前１１時５７分 Explanation 07 Select this to set the default subtitle language for BD-ROM and DVD-Video playback to English. Choose a language from the listed languages to set the default subtitle language for BD-ROM and DVD-Video playback.
PAGE 46
V6000_CUXJ_EN.book 07 46 ページ午前１１時５７分 Parental Lock Options Set Password (Change Password) Register (change) the password for parental lock settings or for unlocking to play DVD-Video with parental lock feature (page 50). Explanation Options DVD-Video Parental Lock Change the player’s parental lock level (page 50). BDMV Parental Lock Change the restricted age (page 50). Country Code Change the Country/Area code (page 50).
PAGE 47
V6000_CUXJ_EN.book 47 ページ２００９年６月５日金曜日午前１１時５７分  Changing the speaker setup Set whether or not speakers are connected to an AV receiver or amplifier, etc., their size and their crossover frequency. This setting is only valid for the AUDIO OUT terminals. When there are no speakers whose speaker size is set to Small, select Bypass for the crossover frequency. When there are speakers whose speaker size is set to Small, select the crossover frequency (Bypass cannot be selected).
PAGE 48
V6000_CUXJ_EN.book 07 48 ページ２００９年６月５日金曜日午前１１時５７分 2 Select and set the method for switching the speaker to be adjusted. Use / to select, then press ENTER. • Auto Set DNS Server Address • Auto – Switch the speaker to be adjusted automatically. On – The DNS server’s IP address is obtained automatically. • Manual – Switch the speaker to be adjusted manually. Off – The DNS server’s IP address must be set manually.
PAGE 49
V6000_CUXJ_EN.book 49 ページ２００９年６月５日金曜日午前１１時５７分 • If you want to enter two characters in succession that are both on the same button (for example a P and an R), press  after inputting the first character then input the second character. • Use CLEAR to delete the last character. • Use / to move the displayed characters when all the input characters cannot be displayed. 5 6 Key Characters Key Characters 1 1.
PAGE 50
V6000_CUXJ_EN.book 07 50 ページ２００９年６月５日金曜日午前１１時５７分 When a disc name is selected, the data downloaded with the BD-LIVE function and data used with the BONUSVIEW is erased. 1 Select and set Parental Lock  DVD-Video Parental Lock  Next Screen. Use / to select, then press ENTER. When Shared Data is selected, all the data downloaded with the BD-LIVE function and not associated to discs is erased. 2 Input the password.
PAGE 51
V6000_CUXJ_EN.book 51 ページ２００９年６月５日金曜日午前１１時５７分  Setting the output terminals Use / to select, then press ENTER. Set the terminals from which the player’s video and audio signals are to be output. 3 Select and set Options  Software Update  Start. Use / to select, then press ENTER. 1 Select and set Options  Output Terminal  Next Screen. Use / to select, then press ENTER. 2 Select and set the video and audio output terminals. Select the actually connected video and audio output terminals.
PAGE 52
V6000_CUXJ_EN.book 07 52 ページ２００９年６月５日金曜日午前１１時５７分 About the audio output settings The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table below. Caution • When ANALOG AUDIO is selected at Output Terminal, no audio signals are output from the HDMI OUT terminal or DIGITAL OUT terminal (pages 23 and 51).
PAGE 53
V6000_CUXJ_EN.book 53 ページ２００９年６月５日金曜日午前１１時５７分 9. When the output video resolution is set to 480i/576i or 480p/576p, the signals may be output in linear PCM (2 channels) or Dolby Digital bitstream, depending on HDMI High Speed Transmission setting and/or the connected HDMI device (page 18). 10. If the connected HDMI device is not compatible with DTS-HD Master Audio or DTS-HD High Resolution Audio, the signals are output in linear PCM (7.1 channels) or DTS Digital Surround bitstream.
PAGE 54
V6000_CUXJ_EN.
PAGE 55
V6000_CUXJ_EN.book 55 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 8 08 Advanced setup Changing the settings Operating the Advanced Setup screen 1 When playback is stopped, display the Home Menu screen. Press ENTER CLEAR OUTPUT RESOLUTION SECONDARY AUDIO VIDEO VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU HOME MENU. 2 Select and set Initial Setup  Advanced Setup. Use / to select, then press ENTER. 3 Select the item and change the setting.
PAGE 56
V6000_CUXJ_EN.book 08 56 ページ２００９年６月５日金曜日午前１１時５７分 Advanced Setup Setting Options Explanation Playlist Auto Repeat On Select this if you want to play the playlist repeatedly. Off Select this if you do not want to play the playlist repeatedly. Baud Rate 2400 bps Set the RS-232C terminal's signal transfer speed to 2 400 bps. 4800 bps Set the RS-232C terminal's signal transfer speed to 4 800 bps. 9600 bps Set the RS-232C terminal's signal transfer speed to 9 600 bps.
PAGE 57
V6000_CUXJ_EN.book 57 ページ２００９年６月５日金曜日午前１１時５７分 Playing the playlist 08 Caution • Depending on the disc or operation, the titles/ chapters may not be played as they were registered on the playlist. • The playlist cannot be played from the playlist screen. Perform the operation below to play the playlist. 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. 2 Select and set Initial Setup. Use / to select, then press ENTER.
PAGE 58
V6000_CUXJ_EN.book 09 58 ページ２００９年６月５日金曜日午前１１時５７分 Chapter 9 Additional information Serial interface specifications In addition to the basic operations on the player's front panel and remote control, the player is equipped with a serial interface conforming to RS-232C standards allowing connection to a computer. The interface is a 9-pin D-Sub connector. Caution • The 9-pin connector uses inch screw threads. The D-Sub connector's pin layout is as shown below.
PAGE 59
V6000_CUXJ_EN.book 59 ページ２００９年６月５日金曜日午前１１時５７分 Commands and statuses 09 Serial interface control is performed by the computer sending commands, etc., and the player returning the status. When command execution is fully completed, the player returns a completion message (R). If an error is generated, the player returns the error code (for example, E04).
PAGE 60
V6000_CUXJ_EN.book 09 60 ページ２００９年６月５日金曜日午前１１時５７分 Table 1 Address modes in which the PL and SM commands are valid BD DVD CD TM(Time)    CH(Chapter)    TI(Title)    TR(Track)    Table 2 Address modes in which the SE and SL commands are valid BD DVD CD TM(Time)    CH(Chapter)    TI(Title)    TR(Track)    Command mnemonics Command mnemonics consist of two-digit ASCII alphabetic coded characters.
PAGE 61
V6000_CUXJ_EN.book 61 ページ２００９年６月５日 Licenses The licenses for the software used on this player are shown below.
PAGE 62
V6000_CUXJ_EN.book 09 62 ページ２００９年６月５日 libpng COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. libpng versions 1.2.6, August 15, 2004, through 1.2.26, April 2, 2008, are Copyright © 2004, 2006-2008 Glenn RandersPehrson, and are distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.0.
PAGE 63
V6000_CUXJ_EN.book 63 ページ２００９年６月５日 “The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.” REFERENCES We highly recommend reading one or more of these references before trying to understand the innards of the JPEG software. The best short technical introduction to the JPEG compression algorithm is Wallace, Gregory K. “The JPEG Still Picture Compression Standard”, Communications of the ACM, April 1991 (vol.
PAGE 64
V6000_CUXJ_EN.book 09 64 En 64 ページ２００９年６月５日 We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
PAGE 65
V6000_CUXJ_EN.book 65 ページ２００９年６月５日 the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright © year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’.
PAGE 66
V6000_CUXJ_EN.book 09 66 En 66 ページ２００９年６月５日 though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law.
PAGE 67
V6000_CUXJ_EN.book 67 ページ２００９年６月５日金曜日午前１１時５７分 Troubleshooting 09 Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, please contact customer services. In the US, call Toll Free (800) 421-1404.
PAGE 68
V6000_CUXJ_EN.book 09 68 ページ２００９年６月５日 Problem 金曜日午前１１時５７分 Check Remedy No picture is displayed or the Are you using an extremely picture is not displayed long cable? properly. Using an extremely long cable may result in noise. Use a relatively short cable. Picture freezes and the front panel and remote control buttons stop working. • Press  STOP to stop playback, then restart playback.
PAGE 69
V6000_CUXJ_EN.book 69 ページ２００９年６月５日金曜日午前１１時５７分 Problem Check Remedy • No sound is output. • Sound is not output properly. Are you trying to listen to the sound of the HDMI OUT terminal while watching the picture from the COMPONENT VIDEO or VIDEO output terminals? Audio signals are not output from the HDMI OUT terminal when video signals are being output from the COMPONENT VIDEO or VIDEO output terminals.
PAGE 70
V6000_CUXJ_EN.book 09 70 ページ２００９年６月５日 Problem 金曜日午前１１時５７分 Check Remedy A message indicating low memory appears while playing a BD-ROM disc. • Perform Individual/Shared Data Erase or Storage Format (page 49). • Perform Application Data Erase (page 49). The DVD layer of BD and DVD Is Hybrid Disc Playback hybrid discs cannot be properly set? played. Set Hybrid Disc Playback to DVD (page 45). The CD layer of BD and CD hybrid discs cannot be played.
PAGE 71
V6000_CUXJ_EN.book 71 ページ２００９年６月５日 Problem 金曜日午前１１時５７分 Check The input does not switch Is Display Power On set to automatically on the Flat Off on the player? Panel TV and AV system (AV receiver or amplifier, etc.) when playback is started on the player or the Home Menu or Home Media Gallery is displayed. Remedy 09 Set Display Power On to On (page 44). Network Problem Check Remedy • BD-LIVE function (connection to the Internet) cannot be used.
PAGE 72
V6000_CUXJ_EN.book 09 72 ページ２００９年６月５日金曜日午前１１時５７分 Others Problem Check Remedy Player cannot be restored to Is a disc loaded in the player? Remove the disc from the player before restoring the player to the the factory defaults. factory defaults (page 51). Check the Advanced Setup  Baud Rate setting and the serial interface specifications (page 56 and 58). Player cannot be controlled by RS-232C.
PAGE 73
V6000_CUXJ_EN.book 73 ページ２００９年６月５日 Problem 金曜日午前１１時５７分 Check EXT does not light on the Is the external storage device player’s front panel display properly connected? when a USB (external storage) device is connected. Are you using a USB cable that is longer than 2 meters? Is the power of the external hard disk turned on? Remedy 09 • Turn the player’s power off, then turn the power back on. • Turn the player’s power off, then reconnect the external storage device (page 21).
PAGE 74
V6000_CUXJ_EN.book 09 74 ページ２００９年６月５日金曜日午前１１時５７分  DTS Digital Surround  Port number DTS Digital Surround is an audio format to record 48 kHz/24 bits audio signals in 5.1 channels. This is a sub-address provided below the IP address for simultaneously connecting to multiple parties during Internet communications.  DTS-HD High Resolution Audio DTS-HD High Resolution Audio is an audio format using lossy coding. It can record 7.1 channels at 96 kHz/24 bits.
PAGE 75
V6000_CUXJ_EN.book 75 ページ２００９年６月５日金曜日午前１１時５７分 Specifications 09 Model BDP-V6000 Type Blu-ray Disc PLAYER Rated voltage AC 120 V Rated frequency 60 Hz Power consumption 32 W Power consumption (standby) 0.3 W Inrush current 26 A or less Weight 7 lb 12 oz (3.5 kg) External dimensions (including projecting parts) 16 9/16 in. (W) x 3 in. (H) x 11 5/16 in.
PAGE 76
10_backcover_V6000_CUXJ.fm 76 ページ２００９年６月５日金曜日午後７時２６分 Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below. 1–800–872–4159 Please do not ship your product to Pioneer without first calling the Customer Support at the above listed number for assistance. Pioneer Electronics (USA), INC.