User manual

Options

Screen Saver Off The screen saver is not activated.

1 min

・The screen saver will be activated if no operation has been performed for

more than one minute/two minutes/three minutes.

・During operation of the screen saver, [SCREENSAVER] is displayed on the

front panel display.

・Operating the remote control can deactivate the screen saver.

2 min

3 min

Auto Power Off Off Select this if you do not want the power to turn off automatically. This is the

default setting for models other than European models.

15 min The power will be automatically turned off if no operation has been performed

for more than 15 minutes or 30 minutes. The default setting for European

models is 15 minutes.

30 min

Network Standby On Select this if you want to input power from a mobile device using a dedicated

application (page 6).

Off Select this if you do not want to use the Network Standby function (described

above).

Update USB Storage Select the method of software updating (page 48).

Network

Load Default Restore the settings to the factory default.

System Information Check the system version number.

BUDA BUDA Information Display and set up the BUDA data on the connected USB device (page 46).

BUDA Setup

Setting Options Explanation

BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 45 ページ２０１４年９月９日　火曜日　午前１０時１４分