BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 1 ページ ２０１４年９月９日 BDP-LX88 BDP-LX88-K BDP-LX88-S BDP-LX58 BDP-LX58-K BDP-LX58-S 火曜日 午前１０時１４分 Blu-ray 3DTM PLAYER For customers in Europe: Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu) Download an electronic version of this manual from our website.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 2 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. CAUTION Operating Environment TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 3 ページ ２０１４年９月９日 火曜日 午前１０時１４分 POWER-CORD CAUTION Condensation Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords.
TOC.fm 4 ページ ２０１４年１１月１８日 火曜日 午後２時３０分 Contents 01 Before you start What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Putting the batteries in the remote control . . . . . . . . . . . . . 5 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About operation of this player from a mobile device (iPod, iPhone, iPad etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 5 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Chapter 1 01 Before you start What’s in the box • To prevent leakage of battery fluid, remove the batteries if you do not plan to use the remote control for a long period of time (1 month or more). If the fluid should leak, wipe it carefully off the inside of the case, then insert new batteries. If a battery should leak and the fluid should get on your skin, flush it off with large quantities of water.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 6 ページ ２０１４年９月９日 01 Software Update Product information on this player is provided on the Pioneer website. Check this website for update and service information on your Blu-ray disc player. IN Europe: http://www.pioneer.eu/ IN U.K.: http://www.pioneer.eu/ http://www.pioneer.co.uk/ IN Hong Kong: http://www.pioneerhongkong.com.hk/ IN Singapore: http://www.pioneer.com.sg 6 En 火曜日 午前１０時１４分 About operation of this player from a mobile device (iPod, iPhone, iPad etc.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 7 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Types of discs/files that can be played 01 Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played. Caution • Only the discs that have been finalized can be played.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 8 ページ ２０１４年９月９日 01 火曜日 午前１０時１４分 • “Blu-ray Disc”, “Blu-ray” and “Blu-ray Disc” logo are trademarks of Blu-ray Disc Association. • DTS-HD High Resolution Audio • • MPEG audio (AAC) is a trademark of DVD Format/Logo Licensing Corporation. Discs that cannot be played • HD DVDs • DVD-RAM discs It is possible that some discs other than the ones listed above may not be playable either.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 9 ページ ２０１４年９月９日 BD-LIVE functions such as downloading movie trailers or additional audio and subtitle languages and playing on-line games can be enjoyed over the Internet. The data downloaded with the BD-LIVE function (trailers, etc.) is stored in the storage. Refer to the disc’s instructions for details about BD-LIVE functions.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 10 ページ ２０１４年９月９日 01 • It may not be possible to play discs recorded using a computer or a BD/DVD recorder, if burn quality is not good due to characteristics of the disc, scratches, dirt on the disc, dirt on the recorder’s lens, etc. About video, audio, and image files and folders Audio and image files can be played on this player when the folders on the disc or USB device are created as described below. Example of folder structure: Root 001.jpg/001.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 11 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Table of Playable Files 01 Playable media BD-R/RE/-R DL/ RE DL/-R LTH, DVD-R/RW/-R DL/ +R/+RW/+R DL, CD-R/RW USB devices1 Network MP3 (.mp3) Sampling frequencies: Up to 48 kHz Bit rate: Up to 320 kbps Audio type: MPEG-1 Audio Layer 3 WMA2 (.wma) Sampling frequencies: Up to 48 kHz Bit rate: Up to 192 kbps Audio type: WMA version 9 AAC (.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 12 ページ ２０１４年９月９日 01 火曜日 午前１０時１４分 Playable media BD-R/RE/-R DL/ RE DL/-R LTH, DVD-R/RW/-R DL/ +R/+RW/+R DL, CD-R/RW USB devices1 Network MP4 (.mp4) Maximum resolution: Up to 1 920 x 1 080 Video: MPEG4, MPEG-4 AVC (level 4.1) Audio: AAC, MP3 WMV (.wmv) Maximum resolution: Up to 1 920 x 1 080 Video: WMV9, WMV9AP (VC-1) Audio: WMA AVI (.avi) Maximum resolution: Up to 1 920 x 1 080 Video: MPEG4 Audio: MP3, AAC 3GP (.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 13 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Part Names and Functions 01 Remote Control 9 1 2 22 3 23 TOP MENU – Press to display the top menu of the BD-ROM or DVD-Video. HOME MENU – (page 41) 10 11 – (page 26) 12 – (page 26) 4 13 – (page 26) 5 6 7 8 CLEAR AUDIO P. VIDEO P. YouTube TOP MENU 9 24 14 / CONTINUED 25 15 A-B – (page 27) SOURCE 26 16 27 17 HDMI – The HDMI Mode switches each time this is pressed (pages 17 and 43).
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 14 ページ ２０１４年９月９日 01 28 /// – Use to select items, change settings and move the cursor. 29 32 午前１０時１４分 REPLAY – Press during playback to return to a position 10 seconds earlier. (page 27) ENTER – Press to execute the selected item or enter a setting that has been changed, etc. 33 SHORT SKIP – Press during playback to forward to a position 30 seconds later. (page 27) RETURN – Press to return to the previous screen.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 16 ページ ２０１４年９月９日 02 火曜日 午前１０時１４分 Chapter 2 Connecting up Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. After connecting, make the settings at the Setup Navigator or Initial Setup menu according to the type of cable connected (page 23). Also refer to the operating instructions for the device being connected. Note • The illustrations used here are mainly of the BDPLX88.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 17 ページ ２０１４年９月９日 About Control Function with HDMI The functions work when a control function with HDMIcompatible Pioneer TV or AV system (AV receiver or amplifier, etc.) is connected to the player using an HDMI cable. Also refer to the operating instructions for the TV and AV system (AV receiver or amplifier, etc.).
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 18 ページ ２０１４年９月９日 02 火曜日 午前１０時１４分 About the PQLS function Connecting a TV PQLS (Precision Quartz Lock System) is a digital audio transfer control technology using the HDMI control function. The player’s output signals are controlled from the AV receiver to achieve high sound quality playback using the receiver’s quartz oscillator. This eliminates the influence of the jitter generated during signal transfer which can adversely affect the sound quality.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 19 ページ ２０１４年９月９日 Connecting an AV receiver or amplifier Connect to an AV receiver or amplifier in order to enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Digital Surround, LPCM, AAC or DSD. For instructions on connecting the TV and speakers to the AV receiver or amplifier, refer to the operating instructions for AV receiver or amplifier.
02_connections.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 21 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Input device is connected with the ZERO SIGNAL terminal. Connecting the USB device The Zero Signal is the reference (GND) for video and audio signals. If you connect the ZERO SIGNAL terminal of the equipment to the audio input terminal of another device connected to this equipment, with a pin cord, the device becomes compatible to the audio standard of this equipment, and the signal integrity improves.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 22 ページ ２０１４年９月９日 02 火曜日 午前１０時１４分 LAN terminal specifications Connecting to the LAN terminal: Ethernet jack (10BASE-T/100BASE-TX) network through LAN Connecting the power interface cord By connecting this player to the network via the LAN terminal, you can play image, audio and video files stored on the components on the network, including your computer, using Source inputs. Turn on the DHCP server function of your router.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 23 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Chapter 3 03 Getting Started Making settings using the Setup Navigator menu Be sure to perform these settings when using the player in the following situations. • When you use the player for the first time. • After Initial Setup format. If the Setup Navigator menu is not displayed Press HOME MENU to display the Home Menu, select Initial Setup Setup Navigator Start, then press ENTER. 3 Start Setup Navigator. Press ENTER.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 24 ページ ２０１４年９月９日 03 Operating the TV with the player’s remote control When the manufacturer code for your brand of TV is set on the player’s remote control, the TV can be operated using the player’s remote control. Caution • The setting may be restored to the default after the batteries are replaced. If this happens, reset it. RESOLUTION DIRECT HDMI DIMMER CD/SACD PROGRAM BOOKMARK ZOOM R G Y TV CONTROL INPUT INDEX B VOL LIGHT CLEAR AUDIO P. FUNCTION VIDEO P.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 25 ページ ２０１４年９月９日 Switching the output video resolution Use the procedure below to switch the output video resolution from the various video output terminals. Press RESOLUTION /. RESOLUTION DIRECT HDMI DIMMER CD/SACD PROGRAM BOOKMARK ZOOM R G Y TV CONTROL INPUT INDEX B VOL LIGHT • The current output video resolution setting is displayed on the player’s front panel display. To switch the output video resolution, press RESOLUTION / again.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 26 ページ ２０１４年９月９日 04 火曜日 Chapter 4 Playback Playing discs or files Note • The resume playback function is canceled automatically in the following cases: This section describes the player’s main operations. For the types of discs and files that can be played, see page 7. Video, image and audio files recorded on discs are played with the Source function (page 34). – When the disc tray is opened. – When the file list window is switched.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 27 ページ ２０１４年９月９日 To resume normal playback Press . Playing specific chapters, tracks or files During playback, input the number of the chapter/track/file you want to select. • Use the number buttons (0 to 9) to input the number, then press ENTER. • Press CLEAR to clear the values you have input. Skipping content During playback, press or . • When is pressed, the playback skips ahead to the beginning of the next chapter/track/file.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 28 ページ ２０１４年９月９日 04 To cancel Repeat Play 火曜日 Deleting the bookmark • Press REPEAT several times during Repeat Play. Note • Repeat Play is canceled in the following cases: Select the bookmark you want to delete, then press CLEAR. • Bookmarks may not be allowed to make for some discs. • Bookmarks are canceled in the following cases: – When you search outside the repeat range. – When the player’s power turned off.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 29 ページ ２０１４年９月９日 火曜日 Switching the subtitles Note For discs or files on which multiple subtitles are recorded, the subtitles can be switched during playback. • Depending on disk or file, DIRECT function will not work in some cases if playback is not stopped (resume playback function is in cancelled state). To cancel the resume playback function, press while playback is stopped. • The subtitles cannot be switched for discs recorded by a DVD or BD recorder.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 30 ページ ２０１４年９月９日 04 Displaying the disc information Press DISPLAY. The disc information appears on the TV screen. To switch off the information display, press DISPLAY again. The information display differs between during playback and when playback is stopped. Enjoying BONUSVIEW or BD-LIVE This player is compatible with BD-Video BONUSVIEW and BD-LIVE.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 31 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Playback functions 04 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 32 ページ ２０１４年９月９日 04 Using the FUNCTION menu 火曜日 午前１０時１４分 FUNCTION menu item list Item Description Title (track)1 Display the title information for the currently playing disc and total number of titles on the disc. Also select the title you want to play. (See the following description.) Chapter Display the information for the currently playing chapter (track/file) and total number of chapters in the disc. Also select the chapter (track/file) you want to play.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 33 ページ ２０１４年９月９日 Playing from a specific time (Time Search) 1 Select Time. Use / to select, then press ENTER. 2 Input the time. Use the number buttons (0 to 9) to input the time. 火曜日 午前１０時１４分 Continuing playback from a specified position (Continued Viewing Playback) • To play from 45 minutes, input 0, 0, 4, 5, 0 and 0, then press ENTER.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 34 ページ ２０１４年９月９日 05 火曜日 午前１０時１４分 Chapter 5 Playback from Source function YouTube SOURCE TOP MENU POPUP MENU POP UP TOP ENTER HOME MENU RETURN About Source function This player’s Source function allows you to display a list of input sources and start playback. This chapter describes setup and playback procedures required to enjoy these features.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 35 ページ ２０１４年９月９日 • Some functions may not be supported depending on the server type or version used. • Supported file formats vary by server. As such, files not supported by your server are not displayed on this unit. For more information check with the manufacturer of your server. Disclaimer for Third Party Content Access to content provided by third parties requires a high speed Internet connection and may also require account registration and a paid subscription.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 36 ページ ２０１４年９月９日 05 Playing the Playlist About Slideshow 1 Press SOURCE to display the Source function. The Source function can also be displayed by selecting Source from Home Menu, then pressing ENTER. Note • Some BD-R/-RE discs have playback protection. To cancel the protection, input the password set for the disc. • It may take a few seconds before playback starts. This is normal. • It may not be possible to play some files properly.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 37 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Chapter 6 06 Playing the web contents You can enjoy some streaming contents on the Internet with the player. Available web contents • YouTube • Picasa Note About the function for restricting access to harmful information on the Internet • This unit is equipped with a function for restricting viewing of web contents, etc., you do not want your children or others to see.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 38 ページ ２０１４年９月９日 07 火曜日 午前１０時１４分 Chapter 7 Setting the Audio/Video options Changing the Audio options There are a number of additional sound settings you can make using the Audio Parameter menu. AUDIO P. VIDEO P. CONTINUED YouTube 1 Press AUDIO P. to display the Audio Parameter screen. SOURCE TOP MENU Operating the Audio Parameter screen 2 Use / to select the setting you want to adjust, then press ENTER.
07_setting_audio_para_video_para.fm 39 ページ ２０１４年１１月１８日 1 2 3 4 5 火曜日 午後３時５４分 This is effective only on audio output from ANALOG AUDIO OUT terminals. • This can be set when Manual is selected for Audio Scaler. • This function does not work when the sampling frequency is 32 kHz. • This setting only affects 2-channel audio sources. • This function does not work when the Auto Sound Retriever setting is On. The sound may be interrupted while setting the delay.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 40 ページ ２０１４年９月９日 07 Adjusting the video 1 Select and set Video Adjust Memory 1 or 2, 3. Use / to select, then press ENTER. 2 Select Settings. Use / to select, then press ENTER. 3 Select the item and change the setting. Use / to select the item, then use / to change the setting. Once the setting is completed, press RETURN to close the settings screen. List of setting items Item Description YNR Reduces noise in the luminance (Y) signal.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 41 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Chapter 8 08 Advanced settings Changing the settings Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. 2 Select and set Initial Setup. Use / to select, then press ENTER. 3 Select the item and change the setting. Use /// to select, then press ENTER. Closing the Initial Setup screen Press HOME MENU or RETURN.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 42 ページ ２０１４年９月９日 Setting Audio Output 08 Digital Output Downmix Max Sampling Frequency Options Explanation 火曜日 午前１０時１４分 Bitstream Select this to output digital audio signals directly. PCM Select this to output digital audio signals converted to 2-channel audio signals. Re-encode When a BD containing secondary audio and interactive audio is played, the two audio signals are mixed and converted to Dolby Digital audio or DTS audio for output.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 43 ページ ２０１４年９月９日 火曜日 午前１０時１４分 HDMI Setting Options Explanation HDMI Mode Dual Video and audio are output simultaneously from the two HDMI OUT terminals. Select this when you want to output video and audio to two TV sets simultaneously. Separate Select this when you want to output the video and audio separately, the video from the HDMI OUT (MAIN) terminal, the audio from the HDMI OUT (SUB) terminal.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 44 ページ ２０１４年９月９日 Language 08 火曜日 午前１０時１４分 Setting Options Explanation OSD available languages Choose a language for the on-screen displays from the listed languages. Audio available languages Choose a language from the listed languages to set the default audio language for BD-ROM and DVD-Video playback. * For some discs, it may not be possible to change to the selected language.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 45 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Options Setting Options Explanation Screen Saver Off The screen saver is not activated. 1 min ・The screen saver will be activated if no operation has been performed for more than one minute/two minutes/three minutes. 2 min 3 min 08 ・During operation of the screen saver, [SCREENSAVER] is displayed on the front panel display. ・Operating the remote control can deactivate the screen saver.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 46 ページ ２０１４年９月９日 08 Setting the IP address 1 Select and set Network IP Address Setting Next Screen. Use / to select, then press ENTER. 2 Set IP address. Use /// to set the IP address of the player or DNS server, then press ENTER. • Auto Set IP Address On – The player’s IP address is obtained automatically. Select this when using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 47 ページ ２０１４年９月９日 1 Select and set Options BUDA BUDA Setup. Use / to select, then press ENTER. 2 Select and set Fmt buda. Press ENTER. Registering or Changing the password Use this procedure to register or change the code number required for the Parental Lock settings. About default password of this unit The default password is “0000”. • This unit might ask you to enter a password when you change the password.
08_advanced_settings.fm 08 48 ページ ２０１４年１１月１８日 火曜日 午後３時５９分 Software updating • This unit supports USB flash drives formatted in FAT32, FAT16 or NTFS. When formatting a USB flash drive on your computer, do so with the settings below. The player’s software can be updated using one of the methods shown below. – File system: FAT32 – Allocation unit size: Default allocation size • Only store the most recent update file on the USB flash drive. • Connecting to the Internet. • Using a USB flash drive.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 49 ページ ２０１４年９月９日 Setting the backlight mode 火曜日 午前１０時１４分 08 • Default setting : 01 (normal mode) The backlight lighting pattern can be selected from among four modes, in consideration of convenience and battery service life. Caution • The setting may be restored to the default after the batteries are replaced. If this happens, reset it. Input the 2-digit code you want to set. Press the number buttons (0 to 9) to input the code while pressing LIGHT.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 50 ページ ２０１４年９月９日 08 火曜日 午前１０時１４分 About how digital audio formats are output Setting Method of conversion Output terminal(s) Bitstream PCM Re-encode Only the primary audio (the main sound for movies, etc.) is output. The secondary audio and interactive audio are not output. The primary audio, secondary audio and interactive audio are converted into PCM audio and output simultaneously.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 52 ページ ２０１４年９月９日 09 火曜日 午前１０時１４分 Chapter 9 Additional information Cautions on use Turn the power off when not using the player Moving the player Depending on the conditions of the TV broadcast signals, striped patterns may appear on the screen when the TV is turned on while the player’s power is turned on. This is not a malfunction with the player or TV. If this happens, turn the player’s power off. In the same way, noise may be heard in the sound of a radio.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 53 ページ ２０１４年９月９日 Cleaning the pickup lens The player’s lens should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. Although lens cleaners for players are commercially available, we advise against using them since some may damage the lens.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 54 ページ ２０１４年９月９日 09 火曜日 午前１０時１４分 Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 55 ページ ２０１４年９月９日 Problem Check 火曜日 午前１０時１４分 Remedy No picture is displayed or the If high definition videos of 4K Change the settings by the following procedure. picture is not displayed etc. are not visible. 1. Press the HDMI button on the remote control for 5 seconds or more. properly. 2. If “4K 4:4:4” is displayed on the product screen, use / button to change it to “4K 4:2:0”. If the video improves after changing the setting, continue using this setting.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 56 ページ ２０１４年９月９日 09 火曜日 午前１０時１４分 Problem Check Remedy • No sound is output. • Sound is not output properly. Is the volume set to the minimum? If the volume of the TV or AV amplifier is set to the minimum, raise it. Is the disc played back in No sound is output during slow motion play and forward and reverse slow motion? scanning.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 57 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Problem Check Remedy Sound is fast or slow. When an HDMI cable is connected, are audio signals being output from devices connected with cables other than HDMI cables? When a Pioneer AV receiver or amplifier compatible with the PQLS function is connected directly to the player’s HDMI OUT terminal using an HDMI cable, the PQLS function is activated when playing an audio CD (CD-DA).
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 58 ページ ２０１４年９月９日 09 火曜日 午前１０時１４分 Network Problem Check Remedy Cannot connect to network. • Insert the LAN cable securely as far as it goes (page 22). • Do not connect using a modular cable. Use a LAN cable for the LAN (10/100) terminal. • Check that the power of the Ethernet hub (router with hub function) or the modem is turned on. • Check that the Ethernet hub (router with hub function) or the modem is properly connected. • Check the network settings.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 59 ページ ２０１４年９月９日 Problem Check The audio files stored on components on the network, such as a computer, cannot The audio component on the be played back. network which has been switched off is switched on. 火曜日 午前１０時１４分 Remedy There are cases where a component with Internet security software installed cannot be accessed. 09 Switch on the audio component on the network before switching on this unit.
09_additional_information.fm 60 ページ 09 ２０１４年１１月１８日 火曜日 午後４時２分 Others Problem Check Remedy Power does not turn on. Is the power cord properly connected? • Plug the power cord securely into the power outlet (page 22). • Unplug the power cord, wait several seconds, then plug the power cord back in. The player’s power turns off automatically.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 61 ページ ２０１４年９月９日 Glossary Angle (Multi angle) Up to 9 camera angles can be recorded simultaneously on BDROM or DVD-Video discs, letting you view the same scene from different angles. AVCHD (Advanced Video Codec High Definition) See page 9. BDAV Of the BD format, the Audio Visual Format Specifications for HD digital broadcast recording is referred to as BDAV on this player and in these operating instructions. BD-J See page 9.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 62 ページ ２０１４年９月９日 09 MPEG (Moving Picture Experts Group) The name of a family of standards used to encode video and audio signals in a digital compressed format. The video encoding standards include MPEG-1 Video, MPEG-2 Video, MPEG-4 Visual, MPEG-4 AVC, etc. The audio encoding standards include MPEG1 Audio, MPEG-2 Audio, MPEG-2 AAC, etc. Multi-session Multi-session/multi-border recording is a method of recording two or more sessions/borders on a single disc.
BDP-LX58_LX88_72-BDPL88-GBRB1_En.book 63 ページ ２０１４年９月９日 火曜日 午前１０時１４分 Specifications 09 Model BDP-LX88 BDP-LX88-K BDP-LX88-S BDP-LX58 BDP-LX58-K BDP-LX58-S Type Blu-ray 3DTM PLAYER Rated voltage AC 220 V to 240 V Rated frequency 50 Hz/60 Hz Power consumption BDP-LX88 : 40 W BDP-LX58 : 27 W Power consumption (standby) BDP-LX88 : 0.3 W BDP-LX58 : 0.3 W Power consumption (Network Standby on) BDP-LX88 : 5 W BDP-LX58 : 5 W BDP-LX88 : 13.4 kg Weight BDP-LX58 : 9.
10_backcover.fm 64 ページ ２０１４年１１月１８日 火曜日 午後５時７分 Please refer to our website for information regarding software updates and service to this product. Contact information: U.K. http://www.pioneer.co.uk/uk/content/support/support/upgrade.html http://www.pioneer.eu/support Hong Kong Pioneer (HK) Limited - Customer Service Center Unit 2, 17/F, Vanta Industrial Centre, 21-33 Tai Lin Pai Road, Kwai Chung, Hong Kong (852) 3583 3288 https://www.pioneerhongkong.com.
