Blu-ray Player User Manual

ManualsBrandsPioneer ManualsBlu-ray PlayerBDP-LX08

Operating Instructions

Blu-ray Disc PLAYER

LX08_WV_EN.book 1 ページ２００８年７月１５日　火曜日　午後２時５１分

Summary of content (72 pages)

PAGE 1
LX08_WV_EN.
PAGE 2
LX08_WV_EN.book 2 ページ２００８年７月１５日火曜日午後２時５１分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
PAGE 3
LX08_WV_EN.
PAGE 4
LX08_WV_EN.book 4 ページ２００８年７月１５日火曜日午後２時５１分 Information for users on collection and disposal of old equipment and used batteries Symbol for equipment These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
PAGE 5
LX08_WV_EN.book 5 ページ２００８年７月１５日火曜日午後２時５１分 Contents 01 01 Before you start 05 Adjusting audio and video What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . 6 Types of discs/files that can be played. . . . . . . . . . . . . . . . . . . . . . . . 7 Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Playable files . . . .
PAGE 6
LX08_WV_EN.book 01 6 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 1 Before you start What’s in the box Remote control x 1 STANDBY/ON Putting the batteries in the remote control Audio cable (white/red plugs) x 1 1 OPEN/CLOSE Open the rear cover. TV CONTROL INPUT SELECT CH AUDIO SUBTITLE VOL ANGLE FL DIMMER Video cable (yellow plugs) x 1 Press lightly on this part and slide into the direction of the arrow.
PAGE 7
LX08_WV_EN.book 7 ページ２００８年７月１５日火曜日午後２時５１分 Types of discs/files that can be played 01 Playable discs Discs with the logo marks below indicated on the disc label, package or jacket can be played.
PAGE 8
LX08_WV_EN.book 01 8 ページ２００８年７月１５日火曜日午後２時５１分 Note • Some discs cannot be played, even if one of the above logo marks is indicated. • To play 8 cm discs, set the disc in the 8 cm disc depression in the center of the disc tray. No adapter is necessary. 8 cm BDROMs cannot be played.  About audio formats The following audio formats are supported on this player: • Dolby TrueHD  Playing BDs • BDs (BDMV) compatible with the formats below can be played.
PAGE 9
LX08_WV_EN.book 9 ページ２００８年７月１５日火曜日午後２時５１分  About region numbers • Some files may not be playable. Blu-ray Disc Player and BD-ROM or DVD-Video discs are assigned region numbers according to the region in which they are sold. • For some files, it may not be possible to use certain functions during playback. This player’s region numbers are: • It may not be possible to play some files, even if they have the extension of a file playable on this player.
PAGE 10
LX08_WV_EN.book 01 10 ページ２００８年７月１５日火曜日午後２時５１分  – Press to turn the TV’s power on and off. • MPEG-1 Audio Layer 3 (MP3) Bit rate: Up to 320 kbps Sampling frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz and 48 kHz INPUT SELECT – Press to switch the TV’s input. CH +/– – Press to select the TV channel. VOL +/– – Press to adjust the volume.  Playable file extensions 3 AUDIO Press to switch the audio streams/channels (page 28). • Movie files .divx and .
PAGE 11
LX08_WV_EN.book 11 ページ２００８年７月１５日火曜日午後２時５１分 16 FL DIMMER Press to switch the brightness of the front panel display. The FL OFF indicator lights when Off is selected. 01 17 ANGLE Press to switch the BD-ROM or DVD-Video camera angles (page 28). 18 OUTPUT RESOLUTION Use these to switch the output video resolution from the HDMI OUT or COMPONENT VIDEO output terminals (page 24). 19 PLAY MODE Press to display/hide the Play Mode screen (page 29).
PAGE 12
LX08_WV_EN.book 01 12 ページ２００８年７月１５日火曜日午後２時５１分 Front Panel (Controls hidden behind the front panel door) 2 1 3 4 5 6 9 1  STANDBY/ON Press to turn the power on and off. 4 2 Remote control sensor Point the remote control to this, then operate it within approximately 7 m. The player may have trouble capturing remote control signals if there is a fluorescent light nearby. If this happens, move the player away from the fluorescent light.
PAGE 13
LX08_WV_EN.book 13 ページ２００８年７月１５日火曜日午後２時５１分 Rear Panel 01 1 2 FRONT 3 4 SURROUND SURROUND BACK CENTER L L R VIDEO OUT AC IN Y R AUDIO OUT ( 2 ch ) VIDEO AUDIO OUT ( 7.1 ch ) SUB WOOFER HDMI OUT PB PR OPTICAL COMPONENT S-VIDEO VIDEO CONTROL DIGITAL IN OUT 7 6 5 1 AUDIO OUT (2 ch) terminals Connect with the audio input terminals on a TV, AV receiver or amplifier, etc. 6 DIGITAL OUT (OPTICAL) Connect with the digital audio input terminal on an AV receiver or amplifier, etc.
PAGE 14
LX08_WV_EN.book 02 14 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 2 Connecting up Connecting a TV Player’s rear panel FRONT SURROUND SURROUND BACK CENTER L L R VIDEO OUT AC IN Y R AUDIO OUT ( 2 ch ) VIDEO AUDIO OUT ( 7.1 ch ) SUB WOOFER HDMI OUT Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.
PAGE 15
LX08_WV_EN.
PAGE 16
LX08_WV_EN.book 02 16 ページ２００８年７月１５日火曜日午後２時５１分 Connecting using a commercially available component video cable Connecting using the included audio cable and video cable Player’s rear panel FRONT Player’s rear panel FRONT SURROUND SURROUND BACK CENTER L L L R L R VIDEO OUT R VIDEO AUDIO OUT ( 7.1 ch ) AUDIO OUT ( 2 ch ) SUB WOOFER HDMI OUT VIDEO OUT VIDEO AUDIO OUT ( 7.
PAGE 17
LX08_WV_EN.book 17 ページ２００８年７月１５日火曜日午後２時５１分 Connecting an AV receiver or amplifier Connect to an AV receiver or amplifier in order to enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround. For instructions on connecting the TV and speakers to the AV receiver or amplifier, refer to the operating instructions of AV receiver or amplifier.
PAGE 18
LX08_WV_EN.book 02 18 ページ２００８年７月１５日火曜日午後２時５１分 Connecting using audio cables Connecting using a commercially available digital audio cable Caution Player’s rear panel • For DTS-HD Master Audio and DTS-HD High Resolution Audio signals, the DTS Digital Surround signals are converted to linear PCM for output (page 50). FRONT SURROUND SURROUND BACK CENTER L L R VIDEO OUT VIDEO AUDIO OUT ( 7.1 ch ) SUB WOOFER HDMI OUT OPTICAL When connecting to a 5.
PAGE 19
LX08_WV_EN.book 19 ページ２００８年７月１５日火曜日午後２時５１分 Connecting the power cord 02 Connect the power cord after all the connections between devices have been completed. Player’s rear panel FRONT SURROUND SURROUND BACK CENTER L L R VIDEO OUT AC IN Y R AUDIO OUT ( 2 ch ) VIDEO AUDIO OUT ( 7.
PAGE 20
LX08_WV_EN.book 03 20 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 3 Getting Started Making settings using the Setup Navigator menu Be sure to perform these settings when using the player for the first time. When you have this player connected to a Pioneer Flat Screen TV that is compatible with HDMI Control, language settings are imported from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins. 4 Select and set the video and audio output terminals.
PAGE 21
LX08_WV_EN.book 21 ページ２００８年７月１５日火曜日午後２時５１分 5 Select and set the HDMI High-Speed Transmission setting. Use / to select, then press ENTER. TOOLS TOP MENU ENTER HOME MENU 8 Check the settings. Select Proceed, then press ENTER. 03 Setup Navigator BD PLAYER Select [Proceed] if you want to start testing your audio and video settings. Proceed RETURN Setup Navigator BD PLAYER Select the HDMI Hi-speed transmission setting. On Off Normally select [On] (Recommended).
PAGE 22
LX08_WV_EN.book 03 22 ページ２００８年７月１５日火曜日午後２時５１分  About the screen saver TV Preset code list The screen saver is automatically activated if there is no operation for over 1 minute after playback is stopped or paused. The screen saver turns off when an operation is performed on the player or remote control. Manufacturer Code(s) The screen saver is automatically activated if there is no operation for over 1 minute after the Home Menu or Home Media Gallery is displayed while playing a BD or DVD.
PAGE 23
LX08_WV_EN.
PAGE 24
LX08_WV_EN.book 03 24 ページ２００８年７月１５日火曜日午後２時５１分 Erasing the additional data from BD-ROMs Switching the video output terminal When a BD-ROM is played, additional data may be stored in the player’s memory (local storage). Use the procedure below to switch the video output terminal. Switch between the digital output (HDMI output) and the analog output (Component Video output, S-Video output or Video output). If the message indicating low memory (local storage) appears, erase the BDMV data.
PAGE 25
LX08_WV_EN.book 25 ページ２００８年７月１５日火曜日午後２時５１分 The output video resolution depends on the video output terminal. See the table below. The table below shows the output video resolution for the different terminals when the frame/field frequency of the playback source is 50 Hz on the upper line, the resolutions when the source's frame/ field frequency is 60 Hz on the lower line.
PAGE 26
LX08_WV_EN.book 04 26 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 4 Playback Playing discs or files  Resuming playback from where it was stopped (resume playback function) • When  STOP is pressed during playback, the point at which the disc stopped is stored in the memory. When  PLAY is pressed, playback resumes from that point. This section describes the player’s main operations. For the types of discs that can be played, see Playable discs on page 7.
PAGE 27
LX08_WV_EN.book 27 ページ２００８年７月１５日火曜日午後２時５１分 Playing specific titles, chapters or tracks BD DVD AVCHD CD Playing in slow motion BD DVD AVCHD CD Movie files Music files  04 Movie files Music files While playback is paused, press and hold /  Input the number of the title, chapter or track you want to play. • Use the number buttons (0 to 9) to input the number, then press ENTER. or /.
PAGE 28
LX08_WV_EN.book 04 28 ページ２００８年７月１５日火曜日午後２時５１分 • The subtitles can also be switched using /. Switching the camera angles • The subtitles can also be switched by selecting Subtitle from the TOOLS menu. For BD-ROM and DVD-Video discs on which multiple angles are recorded, the angles can be switched during playback.
PAGE 29
LX08_WV_EN.book 29 ページ２００８年７月１５日火曜日午後２時５１分 • Secondary audio mark is displayed for scenes at which secondary audio is recorded. Displaying the disc information BD DVD AVCHD CD Note • In some cases the secondary audio may switch or the switching screen provided on the disc may be displayed immediately, without the current secondary audio or the total number of secondary audio streams recorded on the disc being displayed.  04 Movie files Music files Press DISPLAY.
PAGE 30
LX08_WV_EN.book 04 30 ページ２００８年７月１５日火曜日午後２時５１分 3 Input the time. Use the number buttons (0 to 9) or / to input the time. 2 Select the type of search. Use / to select, then press ENTER. Use / to move the cursor. See the table on page 33 for the search types.
PAGE 31
LX08_WV_EN.book 31 ページ２００８年７月１５日火曜日午後２時５１分 Playing a specific section within a title or track repeatedly (A-B Repeat) Use this procedure to play a specific section within a title or track repeatedly. Playing repeatedly (Repeat Play) 04 Use this procedure to play the currently playing disc, title, chapter, track or file repeatedly. 1 During playback, press PLAY MODE to display the Play Mode screen. 1 During playback, press PLAY MODE to display the Play Mode screen.
PAGE 32
LX08_WV_EN.book 04 32 ページ２００８年７月１５日火曜日午後２時５１分 Playing in random order (Random Play) Use this procedure to play the tracks or files in random order. 1 During playback, press PLAY MODE to display the Play Mode screen. VIDEO SELECT PLAY MODE HOME MEDIA GALLERY DISPLAY POPUP MENU MENU TOOLS TOP MENU The Play Mode screen can also be displayed by selecting Play Mode from the TOOLS menu. 2 Select Repeat/Random. Use / to select, then press ENTER.
PAGE 33
LX08_WV_EN.book 33 ページ２００８年７月１５日火曜日午後２時５１分 About Play Mode types 04 The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. Disc/file type Play Mode type Repeat play Random Search play 1. 2. 3. 4. 5. 6.
PAGE 34
LX08_WV_EN.book 04 34 ページ２００８年７月１５日火曜日午後２時５１分 Playing from the Home Media Gallery The Home Media Gallery lets you display a list of the titles, tracks or files recorded on the disc. The discs that can be played from the Home Media Gallery are as shown below (see also page 7). • BD-R/-RE discs • DVDs recorded in VR format • Music CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which only data files of movie or music files, etc. are recorded 3 Select the title or track to be played.
PAGE 35
LX08_WV_EN.book 35 ページ２００８年７月１５日火曜日午後２時５１分 3 Select Movies. Use / to select Movies, then press ENTER. 04 Note • It may take a few seconds before playback starts. This is normal. DVD-RW • It may not be possible to play some files properly. • The number of views may be restricted (page 9). Movies Music Playing music files View available movies. 1 Press HOME MEDIA GALLERY to display the Home Media Gallery.
PAGE 36
LX08_WV_EN.book 04 36 ページ２００８年７月１５日火曜日午後２時５１分 • All Songs – All the recorded files are displayed. Music CD-ROM Folders All Songs Playing in the desired order (HMG Playlist) The discs that can add tracks and files to the HMG (Home Media Gallery) Playlist are as shown below. • Music CDs (CD-DAs and DTS-CDs) • DVDs/CDs on which music files are recorded  Adding tracks/files Use this procedure to add tracks and files, and create the HMG Playlist. If you have selected All Songs, proceed to step 6.
PAGE 37
LX08_WV_EN.book 4 37 ページ Press ２００８年７月１５日火曜日午後２時５１分 TOOLS to display the TOOLS menu. HOME MEDIA GALLERY DISPLAY 2 Select HMG Playlist. Use / to select, then press ENTER. 04 POPUP MENU Home Media Gallery BD PLAYER MENU TOOLS TOP MENU CD-ROM HMG Playlist ENTER 5 Select Add to HMG Playlist. Use / to select, then press ENTER. Folders CD-ROM/Music Display the HMG Playlist. Music001.mp3 Music002.mp3 Music003.mp3 Music004.mp3 Music005.mp3 Music006.mp3 BD PLAYER TOOLS Music007.
PAGE 38
LX08_WV_EN.book 05 38 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 5 Adjusting audio and video Adjusting the video 2 Select the item to be adjusted. Use / to select. The quality of the playback picture can be adjusted according to the TV you are using. Video Adjust [ Memory1 ] Prog. Motion Motion Auto1 Pure Cinema 1 During playback, press VIDEO ADJUST to display the Video Adjust screen.
PAGE 39
LX08_WV_EN.book 39 ページ２００８年７月１５日火曜日午後２時５１分  Closing the Video Adjust screen Press HOME MENU.  Closing the Audio DRC screen Press ENTER or  About Pure Cinema 05 HOME MENU.
PAGE 40
LX08_WV_EN.book 06 40 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 6 Advanced settings Changing the settings (Initial Setup) Operating the Initial Setup screen 1 When playback is stopped, display the Home Menu screen. Press HOME MENU. ENTER HOME MENU RETURN PLAY 2 Select and set Initial Setup. Use / to select, then press ENTER. TOOLS TOP MENU ENTER HOME MENU RETURN HOME MENU BD PLAYER Home Media Gallery Initial Setup Set up the player for use. 3 Select the item and change the setting.
PAGE 41
LX08_WV_EN.book 41 ページ２００８年７月１５日火曜日午後２時５１分 06 Note • Items that cannot be changed are indicated in gray. The items that can be selected depend on the player’s status. • The factory default settings are indicated in bold. Video Out Setting Options Explanation TV Aspect Ratio 16:9 (Widescreen) Select this when connected to a wide (16:9) TV. 4:3 Video Out DVD 16:9 Video Out NTSC on PAL TV 4:3 (Standard) Select this when connected to a conventional TV.
PAGE 42
LX08_WV_EN.book 06 42 ページ２００８年７月１５日火曜日午後２時５１分 HDMI Setting Options HDMI High-Speed Transmission On Explanation Select this when connected with a High Speed HDMI™ cable (page 15). Off Select this when connected with a Standard HDMI™ cable (page 15). The player’s setting screen is closed if the output video resolution is switched by changing the HDMI High-Speed Transmission setting. HDMI Color Space Auto The video signal that is output (YCbCr or RGB) is switched automatically.
PAGE 43
LX08_WV_EN.book 43 ページ２００８年７月１５日火曜日午後２時５１分 Options Setting Options Output Terminal Priority Select the terminals for outputting video and audio signals with priority. For details, see Changing the terminals for outputting video and audio signals (Output Terminal Priority) on page 49. On Screen Display On Select this to display the operation indicators (Play, Stop, etc.) on the TV screen. Off Select this if you do not want to display the operation indicators (Play, Stop, etc.
PAGE 44
LX08_WV_EN.book 06 44 ページ２００８年７月１５日火曜日午後２時５１分  Closing the speaker settings screen Changing the speaker setup Press ENTER. Set whether or not to use the speakers which are connected to the AV receiver or amplifier, as well as the size of the speakers. This setting is only valid for analog audio outputs. Note • Select Initial Setup from the HOME MENU, then press ENTER. 1 Select and set Speakers. Use / to select, then press ENTER.
PAGE 45
LX08_WV_EN.book 45 ページ２００８年７月１５日火曜日午後２時５１分 3 Select and set the method for switching the speaker to be adjusted. Use / to select, then press ENTER. 1 Select and set Parental Lock. Use / to select, then press ENTER.
PAGE 46
LX08_WV_EN.book 06 46 ページ２００８年７月１５日火曜日午後２時５１分 Use / to move the cursor. 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Initial Setup BD PLAYER Video Out Audio Out Speakers HDMI Language Parental Lock Options Setup Navigator Use / to move the cursor.
PAGE 47
LX08_WV_EN.book 47 ページ２００８年７月１５日火曜日午後２時５１分 Changing the Parental Lock level for watching DVDs 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. 06 Use / to move the cursor. Some DVD-Video discs containing scenes of violence, for example, have Parental Lock levels (check the indications on the disc’s jacket or elsewhere). To restrict watching these discs, set the player’s level to the level lower than the discs.
PAGE 48
LX08_WV_EN.book 06 48 ページ２００８年７月１５日火曜日午後２時５１分 Changing the Country/Area code BD DVD AVCHD CD 3 Input the password. Use the number buttons (0 to 9) or / to input the number, then press ENTER to set. Use / to move the cursor. Movie files Music files Note • Refer to Country/Area Code Table on page 56. 1 Select and set Parental Lock. Use / to select, then press ENTER.
PAGE 49
LX08_WV_EN.book 49 ページ２００８年７月１５日火曜日午後２時５１分 Changing the terminals for outputting video and audio signals (Output Terminal Priority) Set the video and audio terminals to be used. Caution 4 Select the terminal for outputting audio signals. Use / to select, then press ENTER. 1 Select and set Options. Use / to select, then press ENTER. • HDMI – HDMI OUT terminal • Digital Audio – DIGITAL OUT (OPTICAL) terminal • Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT (7.
PAGE 50
LX08_WV_EN.book 06 50 ページ２００８年７月１５日火曜日午後２時５１分 About the audio output settings The audio signals that are output differ according to the audio format recorded on the disc and the player’s settings. Check on the table below. AUDIO OUT terminal Audio format 2ch2 BD-ROM Dolby Digital 5.1-channel audio Converted to 2-channel audio Linear PCM Dolby Digital MPEG-2 AAC Converted to 2-channel audio 5.1-channel audio MPEG Dolby Digital DTS Digital Surround Converted to 2-channel audio 5.
PAGE 51
LX08_WV_EN.book 51 ページ２００８年７月１５日火曜日午後２時５１分 Chapter 7 07 Additional information Troubleshooting Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used.
PAGE 52
LX08_WV_EN.book 07 52 ページ２００８年７月１５日火曜日午後２時５１分 Problem Check Remedy Picture is stretched. Aspect ratio cannot be switched. Is the TV’s aspect ratio properly set? Read the TV’s operating instructions and set the TV’s aspect ratio properly. Is 4:3 Video Out properly set? • Set 4:3 Video Out properly (page 41).
PAGE 53
LX08_WV_EN.book 53 ページ２００８年７月１５日火曜日午後２時５１分 Problem Check Digital audio signals are not output from the DIGITAL OUT (OPTICAL) terminals (analog audio signals are output). Is Audio Out set to audio formats supported by the connected • Read the operating instructions of the connected AV receiver AV receiver or amplifier? or amplifier and check the supported audio formats. • Set Audio Out properly (page 41). Noise can be heard when outputting DTS Digital Surround signals.
PAGE 54
LX08_WV_EN.book 07 54 ページ２００８年７月１５日火曜日午後２時５１分 When connected using an HDMI cable Problem Check Remedy HDMI indicator does not light. Is the input of the connected HDMI device properly set? Read the HDMI device’s operating instructions and set the input properly. Is a DVI device connected? Read the DVI device’s operating instructions and check whether it is compatible with HDCP.
PAGE 55
LX08_WV_EN.book 55 ページ２００８年７月１５日火曜日午後２時５１分 Others 07 Problem Check Remedy The power turns off automatically. Is Auto Power Off set to On? If Auto Power Off is set to On, the power turns off automatically if no operation is performed for over 30 minutes (page 43). Is HDMI Control set to On? The player’s power may turn off together with the power of the connected TV. If you do not want the player’s power to turn off when the TV’s power is turned off, set HDMI Control to Off (page 42).
PAGE 56
LX08_WV_EN.
PAGE 57
LX08_WV_EN.book 57 ページ２００８年７月１５日火曜日午後２時５１分 Specifications 07 Model BDP-LX08 Type Blu-ray Disc PLAYER Rated voltage AC 220 V to 240 V Rated frequency 50 Hz/60 Hz Power consumption 36 W Power consumption (standby) 0.5 W Weight 6.5 kg External dimensions (including projecting parts) 420 mm (W) x 80 mm (H) x 356 mm (D) Tolerable operating temperature +5 °C to +35 °C Tolerable operating humidity 5 % to 85 % (no condensation) Output terminals Video 1 set, RCA jack (1.
PAGE 58
LX08_WV_EN.book 07 58 ページ２００８年７月１５日火曜日午後２時５１分 Cautions on use Moving the player If you need to move this unit, first remove the disc if there’s one loaded, and close the disc tray. Next, press  STANDBY/ON to switch the power to standby, checking that the POWER OFF indication on the front panel display goes off. Wait at least 10 seconds. Lastly, disconnect the power cord. Never lift or move the unit during playback — discs rotate at a high speed and may be damaged.
PAGE 59
LX08_WV_EN.book 59 ページ２００８年７月１５日火曜日午後２時５１分 Handling discs Glossary 07 Do not use damaged (cracked or warped) discs. Do not scratch the disc’s signal surface or let it get dirty.  Aspect ratio Do not load more than one disc into the player at a time. The ratio of a TV screen’s width to its height. Conventional TVs have an aspect ratio of 4:3, while high definition (HD) and widescreen TVs have an aspect ratio of 16:9.
PAGE 60
LX08_WV_EN.book 07 60 ページ２００８年７月１５日火曜日午後２時５１分  Deep Color This is one of the capabilities of HDMI™. The players supporting Deep Color can transmit a video signal with a color bit depth of greater than 8 bits per color component. Subtle color gradations can be reproduced when connected to a TV that supports Deep Color.  DivX DivX is a media technology developed by DivX, Inc. DivX media files include moving picture data.
PAGE 61
LX08_WV_EN.book 61 ページ２００８年７月１５日火曜日午後２時５１分  Region number A number assigned to Blu-ray Disc Players, BD-ROM and DVDVideo discs according to the region in which they are sold. A disc can be played if the region numbers indicated on the disc include the number set for the player or if “ALL” is indicated. 07  S-Video output An output terminal for transmitting separate luminance (Y) and color (C) signals over a single cord. It offers clearer pictures than the composite video output.
PAGE 62
LX08_WV_EN.book 07 62 ページ２００８年７月１５日火曜日午後２時５１分 Licenses The licenses for the software used on this player are shown below.
PAGE 63
LX08_WV_EN.book 63 ページ２００８年７月１５日火曜日午後２時５１分 Introduction The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least.
PAGE 64
LX08_WV_EN.book 07 64 ページ２００８年７月１５日火曜日午後２時５１分 libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng0.88, with the following individuals added to the list of Contributing Authors: John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.
PAGE 65
LX08_WV_EN.book 65 ページ２００８年７月１５日火曜日午後２時５１分 In order to support file conversion and viewing software, we have included considerable functionality beyond the bare JPEG coding/decoding capability; for example, the color quantization modules are not strictly part of JPEG decoding, but they are essential for output to colormapped file formats or colormapped displays. These extra functions can be compiled out of the library if not required for a particular application.
PAGE 66
LX08_WV_EN.book 07 66 ページ２００８年７月１５日火曜日午後２時５１分 The TIFF 6.0 file format specification can be obtained by FTP from ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 (Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or from ftp://ftp.
PAGE 67
LX08_WV_EN.book 67 ページ２００８年７月１５日火曜日午後２時５１分 The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
PAGE 68
LX08_WV_EN.book 07 68 ページ２００８年７月１５日火曜日午後２時５１分 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
PAGE 69
LX08_WV_EN.book 69 ページ２００８年７月１５日火曜日午後２時５１分 In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU Linux operating system.
PAGE 70
LX08_WV_EN.book 07 70 En d) 70 ページ２００８年７月１５日火曜日午後２時５１分 If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
PAGE 71
LX08_WV_EN.book 71 ページ２００８年７月１５日火曜日午後２時５１分 [Notice on GNU General Public License] This product include the software licensed for use under the terms of a GNU General Public License. A copy of the corresponding source code can be obtained by being charged the fee for distribution. To obtain a copy, contact your local Pioneer Customer Support Center. See the GNU website (http://www.gnu.org) for details of the GNU General Public License.
PAGE 72
LX08_WV_EN.book 72 ページ２００８年７月１５日火曜日午後２時５１分 Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu) PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.