User manual

47
En
07
4 Select and set Options  Update  Network 
Start.
Use /// to select, then press ENTER.
5 Updating starts.
Press ENTER.
•Software updating may take a certain period of time.
•When updating is completed, the unit restarts
automatically.
 Updating using a USB flash drive/
disc
Note
•When an update file is provided on the Pioneer
website, use your computer to download it onto a
USB flash drive or disc. Carefully read the
instructions on downloading update files provided on
the Pioneer website.
• Store the update file in the root directory of the USB
flash drive or disc. Do not store it within a folder.
•Do not put any files other than the update file on the
USB flash drive or disc.
•To update using a disc, use a CD-R or CD-RW disc.
• This unit supports USB flash drives formatted in
FAT32, FAT16 or NTFS. When formatting a USB flash
drive on your computer, do so with the settings below.
– File system: FAT32
– Allocation unit size: Default allocation size
• Only store the most recent update file on the USB
flash drive or disc.
• Do not use a USB extension cable to connect a USB
flash drive to the player. Using a USB extension cable
may prevent the player from performing correctly.
1 Plug in the USB flash drive or load the disc on
which the update file is stored.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options  Update  Disc or USB
Storage  Start.
Use /// to select, then press ENTER.
5 Updating starts.
Press ENTER.
•Software updating may take a certain period of time.
•When updating is compl
eted, the unit restarts
automa
tically.
Restoring all the settings to
the factory default settings
1 Check that the player’s power is turned on.
2 When playback is stopped, display the Home
Menu screen.
Press HOME MENU.
3 Select and set Initial Setup.
Use / to select, then press ENTER.
4 Select and set Options  Load Default  Next
Screen.
Use / to select, then press ENTER.
5 Select and set OK.
Use / to select, then press ENTER.
Note
• After restoring all the settings to the factory default
settings, use Setup Navigator to reset the player
(page 24).
BDP-450_VXE8_IBD_EN.book 47 ページ ２０１２年６月２２日 金曜日 午後２時１１分