Owner's Manual

ManualsBrandsPioneer ManualsBlu-ray Player3D-Compatible Streaming Blu-ray Disc Player

The operation procedure for

inputting characters manually

Numeric characters such as IP address can be

entered on the input screen using the number buttons

(0 to 9) or  and ENTER on the remote control.

IP Address

Netmask

Gateway

123

Press 1 ENTER at the boxes in which characters

are to be entered, and the input screen will

appear.

Numeric

1 234567890

Edit

Press 2  to select the desired input mode.

Press the number buttons (0 to 9) or

3  to

select a number/character, then press ENTER.

Input character list

Numeric

1 2 3 4 5 6 7 8 9 0

Edit

Cancel Left Right Complete Del.Char.

The same operation as * RED, GREEN, BLUE, YELLOW and

RETURN can be performed by

selecting each of the items and pressing ENTER.

“Del.Char.” stands for deleting characters.

Repeat the step 3 to display all of the desired 4

characters/numbers in the input field.

Example: The screen for inputting numeric characters

Numeric

123

123 4567890

Edit

NOTE

Press • RETURN (Del.Char.) to delete a number/

character you have input.

To change a number/character you have input, press •

GREEN (Left) or BLUE (Right) to select the number/

character you want to change, and press RETURN

(Del.Char.). Then, press  to select a new number/

character you want to input, and press ENTER.

Press 5 YELLOW (Complete) to fix the numbers

which have been input.

IP Address

Netmask

Gateway

123

6 Repeat step 1 to 5 to finish inputting all the

required characters.

Press

9 ENTER to test the connection.

For setting the IP address, press

10  to select

“Yes” or “No”, then press ENTER.

Do you obtain the IP address

automatically?

IP Address

Netmask

Gateway

Yes

If selecting “Yes”: The IP address is automatically •

obtained.

If selecting “No”: The IP address, netmask, gateway •

and primary and secondary DNS IP addresses are

manually entered using the screen for inputting

characters. (See right.)

Press 11  to select “Next”, then press ENTER.

For testing the connection to the internet, after

confirming the settings, press  to select

“Test”, then press ENTER.

“Test” is available only when setting to obtain the IP •

address automatically. “Test” cannot be selected if the

IP address has not been obtained automatically.

Confirm the current setting.

: xxx xxx xxx xxx

: xx:xx:xx:xx:xx:xx

IP Address

Netmask

Gateway

DNS Address

MAC Address

Test

Complete

As a result of the test, if the internet connection fails, •

enter the setup values manually.

Press 13  to select “Complete”, then press

ENTER.

Settings

Selected by

pressing 

Selected by

pressing 