User guide

05
36
En
– Channel Level is set to Fix (page 38).
 Closing the Channel Level screen
Press HOME MENU.
Adjusting the audio delay
(Lip Sync)
Adjust the audio delay for the selected video output
terminal if the video and audio are not synchronized.
1 During playback, display the TOOLS menu.
Press TOOLS.
2 Select and set Audio Adjust.
Use / to select, then press ENTER.
3 Select and set Lip Sync.
Use / to select, then press ENTER.
4 Select Auto or Manual.
Use / to select.
•Auto – The player automatically adjusts the timing of
the video and audio when connected to a device
equipped with the HDMI Auto Lipsync Correction
feature using an HDMI cable.
•Manual – Adjust manually while viewing the video.
If you have selected Manual, proceed to step 5.
5 Adjusting the amount of audio delay.
Press , then use / to adjust.
The audio delay can be adjusted from 0 to 250 ms in steps
of 5 ms.
Note
•The Lip Sync adjustment is only applicable to the
output terminal set at Output Terminal (page 46).
• The sound may be interrupt
ed while setting the delay.
 Closing the Lip Sync screen
Press ENTER or HOME MENU.
Lip Sync
Manual
100 ms
0 50 150100 200 250
320_UXJCA_EN.book 36 ページ ２００９年２月１３日 金曜日 午後４時２６分