User guide

23
En
03
•The output video resolution depends on the video
output terminal below.
•The output video resolution setting can also be
switched by selecting Output Video Resolution
from the TOOLS menu.
 About Film material
The film material is a video signal with a frame rate of 24
frames/second. For example, these materials include
1080/24p, 720/24p, etc.
 To output film material
To output 1080/24p film material fr om HDMI OUT
terminal, set the output video resolution to either Auto or
Source Direct.
Caution
• 1080/24p signals can only be output from the HDMI
OUT terminal. They cannot be output from other
video terminals.
• When Auto is selected, the picture is output at 60
frames/second if your TV is not compatible with 1080/
24p signals.
• When Source Direct is selected, the signals are
output as such, even if your TV is not comp atible with
1080/24p signals. If the picture is not displayed
properly, use OUTPUT RESOLUTION to set an output
video resolution at which the video and audio signals
are properly o
u
tput.
• Even if Auto or Source Direct is selected, 720/24p
video signals are output at 60 frames/second.
 About the output video resolution
The output video resolution setting and the resolution of the picture that is actually output differ for the different
terminals. See the table below.
Auto


Output Video Resolution
Source : 1080/60i
Current Output : 1080/60i
Video resolution of the
currently playing disc
Output video resolution
from the player
Example:
Output video
resolution
setting
HDMI
1
1. The video output terminal set at Video in the Setup Navigator (page 19) or the video output terminal selected with VIDEO SELECT (page 22).
COMPONENT/VIDEO
1
HDMI OUT terminal COMPONENT VIDEO/
VIDEO output
terminals
HDMI OUT terminal COMPONENT VIDEO
output terminals
2
2. Depending on the BD, the pictures may not be output.
VIDEO output
terminal
2
Auto
3
3. This cannot be selected when the video output terminal is set to COMPONENT/VIDEO.
Resolution preferred by
TV
4,5,6
4. The pictures are output with the preferred output resolution of the device (TV, AV receiver or amplifier, etc.) connected to HDMI OUT
terminal.
5. For details on the output of film material (1080/24p or 720/24p video signals), see To output film material above.
6. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i even if the TV's recommended resolution is 1080/60p.
No video signals are
output
No video signals are
output
——
480i 480/60i 480/60i 480/60i
480p 480/60p 480/60p
1080i 1080/60i
1080/60i
7,8
7. DVD-Video or DVD-R/-RW (VR format) may be output at 480/60p.
8. BD-ROM or BD-R/-RE may be output at 480/60p.
1080p
3
1080/60p
9,10
9. Depending on the connected HDMI cable, the video signals may not be output.
10. Sources with a resolution of 720/60p and 720/24p are output at 1080/60i.
——
Source Direct Resolution recorded on
disc
5,11,12
11. Depending on the connected TV, the video signals may not be output.
12. 720/24p film material is output at 720/60p.
Resolution recorded on
disc
8,11,12,13
13. 1080/24p film material is output at 1080/60i.
480/60i
320_UXJCA_EN.book 23 ページ ２００９年２月１３日 金曜日 午後４時２６分