Operation Manual

07
36
En
HDMI
HDMI Audio Out Bitstream Select this to output HDMI audio signals directly.
PCM Select this to output HDMI audio signals converted to PCM audio signals.
Reencode When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off Select this when you do not want to output the audio signal from the HDMI
output terminal.
Control On Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 16.
Off Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
To use Sound Retriever Link, Stream Smoother Link and PQLS function (pages 16), Control must be set to On.
HDMI Deep Color 30bits Select this when outputting the video signals with 30-bit color.
36bits Select this when outputting the video signals with 36-bit color.
Off Select this when outputting the video signals with normal 24-bit color.
When [30bits] or [36bits] is selected, set the color space (page 35) to a setting other than YCbCr 422.
HDMI 1080P 24Hz On Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D Auto With 3D discs, the disc is played with 3D images.
Off 3D images are not played.
3D Notice Yes This sets whether or not to display the 3D notice when playing 3D images.
No
Network
IP Address Setting Select this to set the IP address of the player and DNS server (page 38).
Proxy Server Only set the proxy server if so instructed by your Internet service provider (page 38).
Information Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection Test Select this to test the network connection (page 39).
Internet Connection
Enable
Select this when connecting to the Internet.
Disable Select this when not connecting to the Internet.
BD-Live Connection Permitted All discs are allowed to connect to BD-LIVE.
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.
DLNA Enable Select this when connecting to DLNA server.
Disable Select this when not connecting to DLNA server.
Interface Ethernet Select when using a LAN cable to connect to the network.
Wireless Select when connecting wirelessly to the network.
Wireless Setting Perform settings for a wireless network connection (page 31).
Setting Options Explanation
BDP-160_EN_ASEAN.book 36 ページ ２０１３年７月１７日 水曜日 午後４時１２分