Datasheet

PIONEER CONFIDENTIAL
Page 12
Environmental Conditions
BDC-TD03RS
6.3. Shock
Drive Condition
Test Item Test Condition Criteria
Acceleration
19.6 m/s2 {2 G} 0-P during read
and play
14.7 m/s2 {1.5G} 0-P during
write operation
Pulse 11 msec (half-sine)
Operating
Number of Pulse
10 pulse x 10sec interval
x 3 directions
No error is found
during the
operation after this
test.
Acceleration 2058 m/s2 {210 G}
Pulse 3 msec
Not Operating
<Half-sine>
Number of Pulse
1 pulse (in 3 directions)
No damage is found
on the drive after
this test
Acceleration 980 m/s2 {100 G}
Pulse 180 inch/sec
Not Operating
<Square Wave>
Number of Pulse 1 pulse (in 3 directions)
No damage is found
on the drive after
this test
Height 80 cm
Transportation
(Packaging
Condition)
Direction 1 corner, 3 edges, 6 faces
The test is done
with packaging
condition. The drive
works normally
after this test.
6.4. ESD (Electro Static Discharge Susceptibility)
Drive Condition
Test Item Test Condition Criteria
Voltage
+/- 4 kV (contact)
+/- 10 kV (in air)
Charge
Capacitor
150 pF
Operating
Discharge
Resistor
330 ohm
Standard: IEC61000-4-2
No drive error.
Voltage
+/-8 kV (contact)
+/- 15kV (in air)
Charge
Capacitor
150 pF
Non-Operating
Discharge
Resistor
330 ohm
Standard: IEC61000-4-2
No hardware damage.
6.5. Altitude
Drive Condition MIN. TYP. MAX. Units
Note
Operating 0 - 3,500 m
Non Operating 0 - 13,600 m
Revision 0.50 February 9th, 2010
12 / 25