User Manual

Getting Started52
En
Getting Started
3
Capter 3
Getting Started
Making settings using
the Setup Navigator
menu
Be sure to perform these settings when using
the player in the following situations.
• Whenyouusetheplayerforthefirsttime.
• After
Initial Setup
format.
• After updating the player’s software.
Caution
• Before turning on the power, check that the
connections between the player and other devices
are correct. Also, turn on the power of the devices
connected to the player before turning on the
player’s power.
• WhenusingaPioneerFlatScreenTVorfront
projector compatible with the Control function,
set Control to On on the connected device before
turning on the player’s power.
Note
• WhenaPioneerFlatScreenTVorfrontprojector
compatible with the Control function is connected
to the player using an HDMI cable, the player is
automatically set to the optimum picture quality for
the connected device.
1. Turn on the TV’s power and switch the
input.
See the TV’s operating instructions for the
details of operating the TV.
2. Turn on the player’s power.
Press

STANDBY/ON
.
Check that the Setup Navigator menu is
displayed.

If the Setup Navigator menu is not
displayed

Press
HOME MENU
to display the
Home Menu, select
Initial Setup
d
Setup
Navigator
d
Start
, then press
ENTER
.
3. Start Setup Navigator.
Press
ENTER
.
y
Setup Navigator starts.
4. Select the OSD language.
Use
/ to select, then press
ENTER
.
WhenaPioneerFlatScreenTVthat
is compatible with Control function is
connected to this player’s
HDMI OUT
terminal, language settings are imported
from the Pioneer Flat Screen TV’s language
settings before
Setup Navigator
begins.
5. Select the appropriate output resolution
for the connected TV.
Use
/
to select, then press
ENTER
.
6. Select the appropriate aspect for the
connected TV.
Use
/ to select, then press
ENTER
.
7. Close the Setup Navigator menu.
Press
ENTER
.
y
Setup Navigator finishes and the setting
is stored.
y
Press
RETURN
to go back to the
previous screen.