Owner manual

2 Connecting
Connecting 15
Connecting
2
Assemble the speakers
Preparing the speakers
1. Attach the non-skid pads to the base of each
speaker.
For front speakers:
Use the supplied adhesive to attach four small
pads to the base (bottom) of each speaker.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
2. Connect the wires to the player.
Connect the white wire with gray line into (+)
side and the other wire into (–) side. To connect
the cable to the player, press each plastic nger
pad to open the connection terminal. Insert the
wire and release the nger pad.
small non-skid pads
Large non-skid pads
White (+)
Orange (+)
Black (–)
Red (+)
y
Do not connect any speakers other than
those supplied to this system.
y
Do not connect the supplied speakers to
any amplier other than the one supplied
with this system. Connection to any other
amplier may result in malfunction or re.
y
Please connect the speaker cable of
subwoofer (purple) to orange of the player.
y
These speaker terminals carry HAZARDOUS
LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord before touching any uninsulated parts.
>
Caution
HB516-DH4_BDEUPPK_ENG.indd 15 2011-05-12 �� 11:43:41