Manual

Connecting18
Connecting
2
Speaker Setup for BCS-313
Preparing the speakers
1. Attach the non-skid pads to the base of each
speaker.
For speakers:
Use the supplied adhesive to attach four small
pads to the base (bottom) of each speaker.
For subwoofer:
small non-skid pads
large non-skid pads
small non-skid pads
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
For subwoofer:
small non-skid pads
large non-skid pads
small non-skid pads
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
For center speaker:
Use the supplied adhesive to attach four small
pads to the base of center speaker.
For subwoofer:
small non-skid pads
large non-skid pads
small non-skid pads
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
2. Connect the wires to the player.
Connect the white wire with gray line into (+)
side and the other wire into (–) side. To connect
the cable to the player, press each plastic nger
pad to open the connection terminal. Insert the
wire and release the nger pad.
For subwoofer:
small non-skid pads
large non-skid pads
small non-skid pads
5 mm
10 mm
5 mm to 7 mm
Mounting screw
(not supplied)
y
Do not connect any speakers other than
those supplied to this system.
y
Do not connect the supplied speakers to
any amplier other than the one supplied
with this system. Connection to any other
amplier may result in malfunction or re.
y
Please connect the speaker cable of
subwoofer (purple) to orange of the player.
y
These speaker terminals carry HAZARDOUS
LIVE voltage. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord before touching any uninsulated parts.
>
Caution
HB916-RD0_BGBRPPK_OM_ENG.indd 18 2011-06-21 �� 4:15:29