Owner's manual

Changing Initial Settings

Setting Remote Control Code Type (REMOTE CODE SELECT)

When using this product with a Pioneer DVD player, set the remote code of the supplied

remote controller to enable operation of this product only. There are two remote codes,

CODE TYPE A and CODE TYPE B. When using this product with an “XDV-P9” Multi-

DVD Player, select CODE TYPE B. When using this product with a DVD navigation unit,

select CODE TYPE A.

Precaution:

• When changing the code type, set the switch on the left side of the remote con-

troller to the same setting. (See page 13.)

Switch to the third SET UP MENU to select

the “REMOTE CODE SELECT” .

“REMOTE CODE SELECT” is indicated in blue.

(For details, see page 41.)

Click the joystick.

Code type selection menu is displayed.

Move the joystick up/down to select the

desired code type.

The currently set code type is indicated the mark

“”. The code type selected with the joystick is indi-

cated in blue.

Click the joystick.

The selected code type is set.

Note:

• Pressing the RETURN button takes you back to the previous display.