Operation Manual

34
Using the RDS Functions
Storing Radio Text in Memory
1. Perform “Radio Text Display” steps 1–3, and
then select the Radio Text you want to store in
memory.
2. Press one of buttons 1–6 for 2 seconds to store
the desired Radio Text. (e.g. Press button 4
for 2 seconds.)
The Radio Text is stored in memory under the selected
button.
Recalling Preset Radio Text
1. Display the Radio Text Display by pressing the
DISPLAY button.
2. Press one of buttons 1–6 to recall a Radio Text
preset under that button. (e.g. Press button 4.)