NAVIGATION AV SYSTEM Operation Manual Be sure to read Important Information for the User first! Important Information for the User includes the important information that you must understand before using this product.
Contents Storing a route in [Saved Routes] ........................ Receiving real-time traffic information (TMC)....................................................................... Checking useful information about your trip............................................................................ Navigation Settings .................................................. Updating the map ..................................................... 40 44 49 60 Bluetooth connection .............................
■ Vehicle equipment Radio settings.............................................................. 81 ■ Disc................................... 84 information.................... 118 Inserting and ejecting a disc.................................. 84 Basic operation ........................................................... 85 Using the Vehicle Bus adapter ............................ 118 Displaying obstacle detection information ... 119 Displaying the operating status of the climate control panel ......
English Google™, Google Play, Android ......................... 169 Android Auto ............................................................ 169 Detailed information regarding connected iPod devices ................................................................. 169 Using app-based connected content .............. 170 HDMI ............................................................................ 171 IVONA Text-to-Speech........................................... 171 Notice regarding video viewing ...
Precaution Notes on internal memory About this manual This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used. Meanings of symbols used in this manual Z000DAB This indicates model names that are supported by the described operations. This indicates to touch the appropriate soft key on the touch screen. This indicates to touch and hold the appropriate soft key on the touch screen.
Parts and controls Main unit Z830DAB Z730DAB Z630BT English Z930DAB Z7330DAB Z6330BT -6-
LCD screen VOL (+/-) Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. RESET Press to reset the microprocessor (page 9). SD card slot Refer to Inserting and ejecting an SD memory card (page 89). Auto EQ Use to connect a microphone for acoustical measurement (sold separately). microphone input jack Disc-loading Refer to Inserting and ejecting a disc (page 84).
Removing the detachable faceplate 1 2 Press the button. Gently grip the bottom of the detachable faceplate and slowly pull it outward. English Detachable faceplate Attaching the detachable faceplate 1 2 Slide the detachable faceplate all the way into this product. Push the lower part of the detachable faceplate until you hear a click.
Basic operation Notes on using the LCD panel English Z930DAB Z830DAB WARNING • Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. • Do not use with the LCD panel left open. It may result in injury in the event of an accident. CAUTION • Do not open or close the LCD panel forcefully. It may cause a malfunction. • Do not operate this product until the LCD panel has completely opened or closed.
Settings and recorded contents are reset to the factory settings. Remote control The remote control CD-R33 is sold separately. For details concerning operations, see the remote control manual. English Starting up the unit 1 2 3 4 Start the engine to boot up the system. The [Select Program Language] screen appears. NOTES • From the second time on, the screen shown will differ depending on the previous conditions.
The top menu screen appears. NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 147). Switching the speaker mode Starting up the navigation system When you use the navigation function for the first time, an initial setup process starts automatically. Follow the steps below. TIP You can change the language later using [Regional] in the [Settings] screen.
8 9 If needed, modify the default route planning options, then touch [Next]. Touch [Finish]. Using the touch panel NOTE To protect the LCD screen from damage, be sure to touch the screen only with your finger gently. Common touch panel keys : Returns to the previous screen. : Close the screen. Operating list screens Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when all characters are not displayed on the display area.
Operating the time bar Operating the menu bar 1 Press . The menu bar pops up on the screen. NOTE The menu bar availability may vary depending on the activating source. Switches the dimmer duration by day or night. Switches between playback and pause. Skips files forwards or backwards. Performs fast reverse or fast forwards. Displays setting menu screen (page 120). Closes the menu bar. Switching the operation panel 1 Touch .
The hidden function keys appear. NOTE This key does not appear for some AV sources. Operating the on-screen keyboard English Displays the characters that are entered. Moves the cursor to the right or left for a number of characters equivalent to the number of touches. Enters the characters in the text box. Deletes the input text to the left of the cursor one letter at a time. Touching and holding the key deletes the letters to the left of the cursor in rapid succession.
Top menu screen English Favourite source icons TIPS • When you connect the external navigation system to this unit, the navigation mode key is displayed at the middle of the right side of the display. • If you select [Power OFF], you can turn off almost all functions. The [Power OFF] mode is released in the following cases. – An incoming call is received (only for hands-free phoning via Bluetooth). – A rear view camera image is input when the vehicle is in reverse. – A button on this unit is pressed.
Connected device key Displays connected device. Switches the source or application with connected devices such as WebLink, external navigation system, Apple CarPlay, Android Auto. 1 Touch and hold . appears at the top right of the favourite application key. 2 Drag to the desired position. To finish the adjusting, touch any place of the display except for the favourite application key. • You can also switch the mobile device to be connected with the following steps. 1 Touch . 2 Touch .
Navigation Menu screen view and operations Press English 1 2 . Touch . The main menu screen appears. Main screen Returns to the map screen. Notifications that contain important information. Displays the previous or next page of the navigation menu. The locations that you saved as favourites. Switches between 2D, 3D, and 2D North up view modes. The [User Profiles] screen where you can create new profiles or edit the existing profiles.
Navigation items Searches for a destination using various methods (page 24). Builds your route or edits the route currently set (page 32). Displays useful information to support your driving (page 44). Configures the navigation-related settings (page 49). Displays information about your navigation system (e.g. the version information or licence). Main menu screen icons with a planned route (only appear when a route is planned) Adds a waypoint (page 34).
How to read the map screen English NOTE Depending on the conditions and settings, some items may not be displayed. * Shows the number and name of the street to be used (or next guidance point). * Shows the next guidance point (manoeuvre). The type of the event (turn, roundabout, exiting motorway, etc.) is displayed (page 22). * Shows the distance to the next guidance point (manoeuvre). * Shows the manoeuvre after the next manoeuvre. Indicates the current location of your vehicle.
English Touch to display the AV source list. Shows the current status of AV source briefly. Touch to display the phone menu screen (page 62). Changing the scale or the map manually By default, even if the map scale is changed on the scrolled map, it will return to the preset scale (according to the setting in [Viewpoint] of the [Navigation Map] settings) when the current position map is displayed. To change the scale of the current position map, perform the following procedure. 1 Press then touch .
at a distance, it will zoom out and lower the view angle to be flat so you can see the road in front of you. • When the route is not set: "Smart Zoom" will zoom in if you drive slowly and zoom out when you drive at high speed. Heading up The map display always shows the vehicle’s direction as proceeding towards the top of the screen. North up The map display always has north at the top of the screen. NOTE The map orientation is fixed at “Heading up” when the 3D map screen is displayed. 1 2 3 Press .
3 Touch . The map returns to the current position. TIP If you press , the map returns to the current position. ▶Control keys on the scrolled map English Map screen (scrolled map) Changes the map view mode. The current map mode is shown on the control key. Zooms in or out on the map. You can also zoom out or in by pinching or expanding the map. Rotates the map clockwise or anticlockwise. Cancels map rotation. Tilts the map angle up or down.
Enter roundabout (manoeuvre after the next manoeuvre). Motorway entrance or motorway exit. Board ferry or leave ferry. Lane information When navigating on multilane roads, you will need to make sure to take the proper lane for the recommended route. Signposts Signs are displayed at the top of the map. Junction view If you are approaching a complex junction, the map is replaced with a 3D view of the junction.
• When the route is set: Distance to final destination, time needed to reach the final destination and estimated arrival time are shown. English • When the route is not set: Direction or altitude is shown. NOTES • Touching and holding the field allows you to display the setting screen for the field. For details, refer to page 56. • The estimated time of arrival is an ideal value calculated based on the speed limit value set in [Max. Speed] of vehicle type setting and the actual driving speed.
NOTE Some information regarding traffic regulations depends on the time when the route calculation is performed. Thus, the information may not correspond with a certain traffic regulation when your vehicle actually passes through the location in question. Also, the information on the traffic regulations provided applies for a passenger vehicle, and not for a lorry or other delivery vehicles. Always follow the actual traffic regulations when driving. Press Touch . English 1 2 3 . Touch [New Route].
Searching for a location by address Search a destination in which the address is specified. TIP Depending on the search results, some steps may be skipped. 3 4 5 6 Touch [Address]. Select the [Country]. Proposes the country where you are as a default. If you want to change the search area, set another country. Select the [Town or Postcode]. Proposes the city/town where you are as a default. You can select the city/town using its postal code instead of its name. Select the [Street].
TIP If you touch 4 , you can sort the results or show the locations of all facilities on the map. Touch [Select as Destination]. ▶Searching for POIs by category or directly from the name of the facilities You can search for POIs by their categories and subcategories. You can also search for POIs by their names in each of their categories. 1 Touch [Places]. 2 Touch [Search Among All Places]. 3 Touch [Around Here] and then select the area in which the POIs should be searched for.
4 • [Along Route]: Searches along the current route, and not around a point already set. This is useful when searching for a stopover that results in a minimal detour, such as searching for petrol stations or restaurants. The results will be listed in order of the length of the necessary detour. (This key is active only when the route is set.) Select one of the categories, subcategories or brands to narrow down the places. 5 Touch the POI. The searched location appears on the map screen.
4 Touch [Start Navigation]. TIP You can change the final destination or add waypoints in [Route Planner] (page 32). Selecting a destination from history 2 3 Touch the entry. The searched location appears on the map screen. Touch [Select as Destination]. Searching for a location using [Combined Search] The [Combined Search] feature lets you quickly find a place by its name and search area. TIP The [Combined Search] function also searches your stored data. 1 2 3 Touch [Combined Search].
TIP When entering the coordinates in UTM format, touch 3 4 , then [UTM Coordinates]. Enter the longitude value and touch [GO!]. The searched location appears on the map screen. Touch [Select as Destination]. NOTE When a value is already entered in the text field, delete the value first. Searching for a location by scrolling the map Specifying a location after scrolling the map enables you to set the position as a destination or waypoint. 1 Press . 2 3 4 Touch and drag the screen to scroll the map.
English Zoom in/zoom out TIP You can also pinch or expand the map to zoom in or out. Cancels the [Map Location] screen and displays the map of the current position. Returns the cursor to the initial position and the map scale to the initial scale. Shows the route setting preferences for route calculation. Touch the keys to activate or deactivate the preference. : Calculates the route prioritising the use of motorways when the key is activated.
Starting the navigation 1 Touch [Start Navigation]. Your navigation system starts the route guidance. TIP See page 22 for details on the route summary screen. Checking and modifying the current route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those options. Building a route using [Route Planner] The [Route Planner] (or [My Route]) feature lets you build your route using the list of destinations.
Starting position (The current vehicle position is set as default and [Current GPS Position] is displayed.) (page 33) Calculates the route and shows the [Route Summary] screen. Displays the shortcuts. [Delete All]: Deletes all waypoints and the destination. Touch [Continue Without Route] to cancel the planned route. [Optimise Waypoints]: Changes the order of waypoints automatically so that the route can be easily travelled. (If the resulting order is the same as the current order, this option is invalid.
The system starts route recalculation after [Show Route] is touched, and then the [Route Summary] screen appears. After [Start Navigation] is touched, your navigation system starts the route guidance. NOTE After [Continue Without Route] is touched, the current position map appears. 1 2 3 4 Press then touch English ▶Changing the starting position . Touch [Route Planner] or [My Route]. Touch [Current GPS Position]. Touch [Back to GPS Position] and then touch [Delete Start Point].
English TIP If more than three route alternatives have been found, [More Results] appears. Touch [More Results] to show the other routes. 5 Touch [Select]. The selected route is applied as your current route. For more information about route calculation conditions, refer to [Route Planning Method] (page 51). Checking detour routes You can check for detour routes that avoid the selected sections or streets, or that avoid the road ahead. You can also check for alternative routes. 1 Press then touch .
Menu Item Description [Restore Original Route] Cancels the route with avoidances and restores the previous route. NOTE The route set by [Alternative Routes] cannot be cancelled. Once you set the route, you can check a summary of the current route. 1 Press then touch . 2 3 Touch [Route Summary]. Touch one of the options. The condition of the displayed route is shown in the upper left by an icon. The total length of the route and approximate required time for the route are in the lower left.
Cancelling the current route guidance If you no longer need to travel to your destination, follow the steps below to cancel the route guidance. 1 Press then touch . 2 3 Touch [Cancel Route] or [Delete Waypoint]. Touch one of the options. If there are no waypoints on the route, touch [Cancel Route] to cancel the route. If there are waypoints on the route, touch [Cancel Route] to cancel the route. Touch [Delete Waypoint] to delete only the nearest waypoint. In such a case the route is recalculated.
Storing a location in [Saved Location] Storing your favourite locations in [Saved Location] allows you to save the time and effort used on re-entering this information. [Saved Location] can include your home location, workplace, and places you have already registered. English Storing your home and your workplace location You can store one home location and one workplace location. 1 Press then touch . 2 3 4 5 Touch [New Route], and then [Saved Location].
Renaming stored locations 1 2 3 then touch . Touch [New Route], and then [Saved Location]. Touch , and then touch [Edit]. The [Select Location to Edit] screen appears. Touch the item you want to rename and touch [Rename]. Enter the name and then touch . Touch [Done]. NOTE [Home] and [Work] cannot be renamed. The location can be set again. Deleting stored locations 1 2 3 4 Press then touch . Touch [New Route], and then [Saved Location]. Touch , and then touch [Edit].
NOTE To use this function, activate the warnings beforehand and set the alert types (page 53). 1 2 . Scroll the map and select a location. The cursor appears at the selected point. Touch . Touch [Add Alert Points]. Set the necessary parameters. Menu Item Description [Alert Type] Set the type of the alert point. [Speed Limit] Set the speed limit for this alert point (if applicable). [Direction] Set the direction from which you expect the alert to come from. 6 Touch [Save].
2 3 4 5 Press then touch . Touch [Route Summary], and then touch . Touch [Save Route]. Enter the name if needed and then touch . English Renaming stored routes 1 2 3 4 5 6 7 Press then touch . Touch [New Route], and then . Touch [Saved Routes]. Touch , and then touch [Edit]. Touch the item you want to rename and touch [Rename]. Enter the name and then touch . Touch [Done]. Deleting stored routes 1 2 3 4 5 Press then touch . Touch [Saved Routes]. Touch , and then touch [Edit].
Displaying the [Traffic Summary] screen 1 2 Press then touch . Touch [Traffic]. The [Traffic Summary] screen appears. English Viewing the traffic list Traffic information is displayed onscreen in a list. This allows you to check how many traffic incidents have occurred, the locations, and the distance from your current position. 1 Press then touch . 2 3 Touch [Traffic]. The [Traffic Summary] screen appears. Touch [Traffic Events]. A list with traffic information that has been received is shown.
3 Touch [Traffic Map]. English Road segments affected by traffic incidents are displayed in an alternate colour on the map, and small symbols above the road show the nature of the incident. The traffic jam lines indicate the degree of the congestion by colour. Traffic notification icon The notification icon shows the status of traffic information reception. Touch the relevant traffic event icon on the map. 1 Traffic notification icon Indicates that there are no traffic incidents in your coverage area.
You can check the details of the traffic incidents. Touch the relevant event to display the location on the map. Turning the traffic information on or off NOTE If you turn the traffic information feature off, [Traffic] on the navigation menu disappears. 1 2 3 4 Press then touch . Touch , and then touch [Settings]. Touch , and then touch [Traffic]. Touch [Traffic] to turn the switch on or off.
Description [Help Nearby] Check for POIs in your surroundings. The preset search categories are as follows. • [Car Repair] • [Health] • [Police] • [Petrol Station] [Country Information] Check for useful driving information about the selected country (for example, speed limits and maximum blood alcohol level). NOTE This information may not necessarily correspond to the actual regulations, etc. Utilise the information for your reference.
• If you want the system to always activate the trip logger whenever the GPS signal is available, turn on [Enable Auto-Saving]. For details, refer to “Setting the trip logger” (page 46). ▶Browsing the trip log 5 Record the trip log. Press then touch . English 1 2 3 4 Touch [Useful Information]. Touch [Trip Monitor]. To export all trip logs, touch [Export All]. Touch any of the items to see the details. TIP To display the trip log on the map, touch [Visible on Map] to tick the check box.
Editing a trip log 1 Press then touch . Touch [Useful Information]. Touch [Trip Monitor]. Touch and then touch [Edit]. English 2 3 4 5 Touch any of the items to edit. Menu Item Description [Delete] Deletes the trip log. [Rename] Renames the trip log. [Change Colour] Changes the colour by selecting another colour from the colour table. TIP If you touch 6 and then touch [Delete All], all entries can be deleted. Touch [Done].
Calculating the fuel consumption The fuel consumption monitor helps you keep track of the fuel consumption of your car even if you do not use the navigation system for all your journeys. Set the initial odometer value and then record the distance driven and the amount of fuel whenever you fill up your car. You can also set reminders for regular car maintenance.
▶Setting the car maintenance schedule Press then touch . Touch [Useful Information]. Touch [Fuel Consumption]. Touch . English 1 2 3 4 5 6 7 8 Touch [Maintenance Schedule]. Touch [Add] or the one of entries. Enter the name, date, and mileage for the reminder. Touch [Done]. TIP To delete an entry, touch to display the shortcut for deletion. Navigation Settings You can configure the navigation settings, and modify the behaviour of this system. 1 2 3 Press then touch .
Menu Item Description [Vehicle] Set the type of vehicle you will be using on the route. TIPS • To edit the name and estimated maximum speed of the selected vehicle profile, touch . • To add a new vehicle profile, touch [Add Profile]. Then select one of the vehicle types and set the name and estimated maximum speed. [Car] • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed.
Menu Item [Lorry] • Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Only roads that allow lorry access are included. • Private roads, resident-only roads and walkways are excluded from routes. • U-turns are not used in routes (turning around on a divided road is not considered a U-turn for the purpose of this system). Set to change the route planning method.
Description [Period Charge] Set to off to avoid prioritising toll roads for calculating the route. This function is useful when you want to avoid toll roads with restricted time access that require you to purchase a separate pass or vignette to extend the length of time allotted for use. NOTE This option can be enabled or disabled separately from the preuse toll road usage option. [Per-use Toll] Set to off to avoid prioritising per-use charged toll roads for calculating the route.
Description [Announce Streets and Roads in Foreign Language Area]* Select whether to have the navigation system read the street names in a foreign country, only the road numbers, or only the manoeuvres. [Early Indication of Manouevres] Select whether you want an immediate announcement for the next manoeuvre or to receive the information when the manoeuvre is near. [Verbosity Level] Set the verbosity of the voice instructions. (How much information is given and how often the prompts occur.
Menu Item Description [Visual] Visible warnings will go off when exceeding the speed limit. [Audio and Visual] Audible and visible warnings will go off when exceeding the speed limit. Select whether to see the speed limit sign on the map all the time. The colour of the speed limit sign changes as exceeding the speed limit when selected. [Outside Towns: ***% of the Speed Limit] Set the percentage of the speed limit warning message in rural areas.
NOTE When you are driving in France, [Speed Camera Types] is not available and [Dangerous Zone] becomes available instead. If [Dangerous Zone (HVA)] is set to on, alert points that you set are also alerted as dangerous zones. You can also set the distance of the pre-alert zone in [Pre-Alert Zone] and turn the sound alert on or off in [Sound alert]. Touch any of the items to change the setting. Touch [Warning Type] and then touch one of the options.
Menu Item Description Shows or hides the 3D elevation of the surrounding terrain. [Track Logs] Turns on or off track log saving which saves the sequence of the locations you go through on your journeys. [Place Markers] Select which POI icons to show on the map while navigating. [Data Fields] Choose to have different values displayed for when navigating a route to a select destination and for when just cruising around without any particular destination (page 23).
Description [Offer Congestion Detour on Highways] When you slow down while driving on a motorway due to a traffic jam, this navigation system offers you a detour using the next exit. The message shows you the distance to the exit and the difference in the distance and estimated time compared to the original route. You can choose from one of the following options: • Touch [Dismiss] or just ignore the message if you want to keep the original route.
Description [Language] Displays the current language of the user interface. By touching the key, you can select a new language from the list of available languages. This system will restart if you change this setting. [Voice Language] Displays the current voice guidance profile. By touching the key, you can select a new voice guidance language from the list of available languages and speakers. Touch any of these keys to hear a sample voice prompt.
Description [Menu Animations] When animation is turned on, the keys on the menus and keyboard screens are animated. Screen transitions are also animated. [Day Skin Theme] Select the style and colours of the navigation menu used in the daytime. [Night Skin Theme] Select the style and colours of the navigation menu used in the nighttime. [Traffic] Enables or disables the traffic information feature.
Description [Enable Auto-Saving] Set whether automatic trip logging is activated or not (page 46). [Save Track Log] Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. You can activate the track logger whenever the trip logger is activated (page 46). [Start Configuration Wizard] Modifies the basic software parameters used during the initial setup process.
Bluetooth® Bluetooth connection 4 5 6 Turn on the Bluetooth function on the device. Press . Touch then . The Bluetooth screen appears. Touch [Connection]. Touch . The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list.
Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device. To disconnect the device, touch the name of the connected device in the list. NOTE Connect the Bluetooth device manually in the following cases: • Two or more Bluetooth devices are registered, and you want to manually select the device to be used.
3 The phone menu screen appears. Touch one of the call icons on the phone menu screen. English The following items are displayed. • Name of the current mobile phone • List number of the current mobile phone • Reception status of the current mobile phone • Battery status of the current mobile phone Using preset dial list (page 64) Using phone book Select a contact from the phone book. Touch the desired name on the list then select the phone number.
Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. 1 Press . 4 Touch . Touch or . On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch . ▶Dialling from the preset dial list 1 2 Touch . Touch the desired entry on the list to make a call. The dial screen appears and dialling starts. ▶Deleting a phone number 1 2 3 4 5 Press . Touch . Touch . Touch . Touch [Yes].
• For using this function with a smartphone, the device must be compatible with Android Auto. For using the voice recognition function with a smartphone, launch Android Auto beforehand. 1 2 3 Press . Touch . TIP You can also launch the voice recognition function by pressing . Minimising the dial confirmation screen 1 Touch . TIP To display the dial confirmation screen, touch again. NOTES • The dial confirmation screen cannot be minimised on the AV operation screen.
Adjusting the other party’s listening volume This product can be adjusted to the other party’s listening volume. 1 Touch to switch between the three volume levels. English Notes for hands-free phoning ▶General notes • Connection to all mobile phones featuring Bluetooth wireless technology is not guaranteed. • The line-of-sight distance between this product and your mobile phone must be 10 metres or less when sending and receiving voice and data via Bluetooth technology.
• If the phone book in the phone contains image data, the phone book may not be transferred correctly. • Depending on the mobile phone, phone book transfer may not be available. Bluetooth audio NOTES • Depending on the Bluetooth audio player connected to this product, the available operations with this product may be limited to the following two levels: – A2DP (Advanced Audio Distribution Profile): Only playing back songs on your audio player is possible.
English Switches between playback and pause. Skips files forwards or backwards. • By pressing then touch or backwards. • By pressing then touch and hold reverse or fast forwards. , you can also skip files forwards or or , you can also perform fast Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher. Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Wi-Fi You can connect your Wi-Fi certified mobile device to this product via Wi-Fi connection. English Wi-Fi connection 1 2 3 4 5 6 7 Turn on the Wi-Fi function on the device. Press . Touch then . Touch [Wi-Fi Settings]. Set [Wi-Fi] to [ON]. Touch [Device Information]. Connect this product with the displayed network name in [Device Information] from the mobile device. Wi-Fi settings 1 2 3 Press Touch . then . Touch [Wi-Fi Settings].
Wi-Fi audio Before using the Wi-Fi audio player, connect the device to this product via Apple CarPlay (page 104) or Android Auto wirelessly (page 108). Press then touch . Touch [Wi-Fi Audio]. The Wi-Fi audio playback screen appears. NOTES • [Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use. • [Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use.
AV source Supported AV source *1 AVIC-Z930DAB/AVIC-Z830DAB/AVIC-Z730DAB/AVIC-Z7330DAB *2 AVIC-Z930DAB/AVIC-Z830DAB *3 AVIC-Z930DAB Displaying the AV operation screen 1 Press then touch the AV operation key. The AV operation screen appears. - 71 - English You can play or use the following sources with this product. • Radio • Digital Radio*1 • CD • ROM (compressed audio or video files on discs) • DVD-Video • Video-CD The following sources can be played back or used by connecting an auxiliary device.
English Displays the source list. Shows the navigation information. This is not displayed for some sources. Recalls equaliser curves (page 133). Selecting a source Source on the AV source selection screen 1 2 Press then touch . Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list 1 2 3 Press then touch the AV operation key. Touch . Touch the source key. When you select [Source OFF], the AV source is turned off.
Changing the display order of source icons 1 2 Press then touch . Touch and hold the source icon and drag the icon to the desired position. Press then touch the AV operation key. Touch . Touch . Drag the source key to the desired position. Adjusting the range of favourite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake. 1 2 3 Press . Touch and hold . appears at the top left of the favourite source icons.
Setup for iPod/iPhone or smartphone NOTES • Operation methods may vary depending on the iPod/iPhone model or smartphone and its software version. • Depending on the software version of iPod/iPhone or the version of smartphone OS, it may not be compatible with this unit. • The setting may not be operable right after it is changed. • This setting is available only when a hands-free telephone is not used. • The setting will change after the following processes are automatically executed.
3 4 5 Touch [Smartphone Setup]. Touch [iPhone/iPod]. The available function icons are displayed. Touch [OK]. Smartphone (Android™ device) Compatible smartphones Compatibility with all smartphones is not guaranteed. For details about smartphone compatibility with this product, refer to the information on our website. 1 2 3 4 5 6 7 Press . Touch then . Touch [Smartphone-related Settings]. Touch [Smartphone Setup]. Touch [Others]. Touch [Android Auto] to use Android Auto.
Digital Radio Z930DAB Z830DAB Z730DAB Z7330DAB For improved Digital Radio reception, make sure a Digital Radio aerial with phantom power input (active type) is used. Pioneer recommends using AN-DAB1 (sold separately) or CA-AN-DAB.001 (sold separately). Current consumption of Digital Radio aerial should be 100 mA or less.
Basic operation Digital Radio screen English Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list to switch to the preset service. Selects the DAB1, DAB2, or DAB3 band. Manual tuning When there are multiple services in the same frequency, switches the services one by one. Seek tuning Skips to the nearest ensemble. Stores recent broadcasts to memory automatically (time shift mode).
Selects a service component. Touch the following category then select each item. [Station]: Displays all service components. [Program Type] (PTY label): Searches from programme type information. [Station Group] (ensemble label): Displays the ensemble list. NOTES • Station list information is automatically updated, when you start to use this source. • When there is any changes in the current station group, station list information automatically updated.
Menu Item [TA OFF] Description Disables this function. Searches for another ensemble that supports the same service component with better reception. If no alternative service component can be found or reception remains poor, the unit will automatically switch to an identical FM broadcast. (HARD LINK) [Soft Link]* [On] [Off] When HARD LINK is unsuccessful, tunes to another ensemble that supports the similar service component.
Radio Starting procedure Press then touch English 1 2 . Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3, MW, or LW band.
TIPS • By pressing • By pressing then touch or , you can also switch the preset channels. then touch and hold or and releasing it, you can also perform seek tuning. Storing the strongest broadcast frequencies (BSM) NOTES • Storing broadcast frequencies with BSM may replace those you have already saved. • Previously stored broadcast frequencies may remain stored if the number of frequencies stored has not reached the limit. 1 2 Touch the preset channel list display key. Touch to begin search.
Menu Item Description [FM Step]*1 [100kHz] [50kHz] Select the seek tuning step for the FM band. [Regional]*2 [On] [Off] Switches whether the area code is checked during the Auto PI search. [Alternative FREQ]*2 [On] [Off] Allow the unit to retune to a different frequency providing the same station. [Auto PI]*1 [On] [Off] Searches for the same PI (Programme Identification) code broadcast station from all frequency bands automatically when the broadcasting station contains RDS data.
*3 AVIC-Z930DAB/AVIC-Z830DAB/AVIC-Z730DAB/AVIC-Z7330DAB *4 AVIC-Z630BT/AVIC-Z6330BT English - 83 -
Disc Inserting and ejecting a disc WARNING Z930DAB Z830DAB Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION Do not insert anything other than a disc into the disc-loading slot. Inserting a disc Z930DAB 1 2 3 Press . Touch to open the LCD panel. Insert a disc into the disc-loading slot. The source changes and then playback will start.
1 Press . Basic operation Audio source Audio source screen 1 Switches between playback and pause. Skips files forwards or backwards. Selects a track from the list. Touch a track on the list to play back. - 85 - English TIPS • By pressing then touch or , you can also skip files/chapters forwards or backwards. • By pressing then touch and hold or , you can also perform fast reverse or fast forwards. • If a Video-CD with PBC (playback control) On is being played, appears.
Audio source screen 2 English Sets a repeat play for the current disc/the current track. Plays or does not play tracks in random order. Video source CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. Video source screen 1 Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Displays the DVD menu. NOTE This function may not work properly with some DVD disc content. In that case, use touch panel keys to operate the DVD menu. Switches the audio/subtitle language. Searches for the part you want to play. Touch [Title], [Chapter], [10key], or [Track] then input the desired number from [0] to [9].
Video source screen 2 English Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio. Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Sets a repeat play for all files/the current chapter/the current title. Displays the DVD menu keypad. If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using these touch panel keys.
Compressed files SD function is only available for AVIC-Z930DAB/AVIC-Z830DAB. You can play compressed audio, compressed video, or still image files stored in a disc or an external storage device. WARNING Z930DAB Z830DAB Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children’s hands and fingers. CAUTION • Do not insert anything other than a disc into the disc-loading slot.
1 2 3 Press to open the LCD panel. Remove the disc and press Z730DAB Press Z630BT Z7330DAB . Z6330BT . English 1 . Touch Inserting an SD memory card Z930DAB 1 2 3 4 Press Z830DAB . Touch to open the LCD panel. Insert an SD memory card into the SD card slot. Press . NOTES • This system is not compatible with the Multi Media Card (MMC). • Compatibility with all SD memory cards is not guaranteed. • This product may not achieve optimum performance with some SD memory cards.
• Connection via a USB hub is not possible. • A USB cable is required for connection. English USB cable USB storage device Unplugging a USB storage device 1 Pull out the USB storage device from the USB cable. NOTES • Check that no data is being accessed before pulling out the USB storage device. • Turn off (ACC OFF) the ignition switch before unplugging the USB storage device. Starting procedure For Disc 1 Insert the disc (page 89).
NOTES • For details on inserting SD card see on Inserting an SD memory card (page 90). • For details on plugging USB storage device, see on Plugging a USB storage device (page 90). Basic operation Audio source Audio source screen 1 (Example: USB) Displays the link search screen. Touch the song to play back followed by touching the song information, after switching to Music Browse mode (page 93). TIP If you touch the artwork, the list of songs in the album is displayed.
Switches the current music information display. Selects a file from the list. Touch a file on the list to playback. NOTE When you play compressed audio files stored in an external storage device (USB, SD), you can search for a file using Music Browse (page 93). Audio source screen 2 (Example: USB) Selects the previous folder or the next folder. Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order.
1 2 3 4 . Touch the [Tag] tab. Touch the desired category to display the file list. Touch the item. Refine the item until the desired song title or file name is displayed on the list. Touch the desired song title or file name to play back. If the selection made with Music Browse has been cancelled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track.
Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Sets a repeat play range for all files/the current folder/the current file. Switches the audio/subtitle language. Selects a file from the list. Touch a file on the list to playback. TIP Touching a folder on the list shows its contents. You can play a file on the list by touching it. Skips files forwards or backwards. Performs fast reverse or fast forwards.
Still image screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Skips files forwards or backwards. Selects the previous folder or the next folder. Rotates the displayed picture 90° clockwise. Sets a repeat play range for all files/the current folder.
iPod Connecting your iPod NOTES • Depending on the generation or version of the iPod, some functions may not be available. • Do not delete the Apple Music® app from your iPod since some functions may not be available. • When connecting an iPhone or iPod touch, quit all applications before connecting the device. 1 2 3 Connect your iPod via USB. Press then touch . Touch [iPod]. NOTE For details on USB connection, refer to the Installation Manual.
Audio source Audio source screen 1 English Displays the link search screen. Select a song from the list related to the song currently playing. TIP If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause. Skips files forwards or backwards. Selects a song from the list. Touch the category then the title of the list to playback of the selected list.
Audio source screen 2 English Changes the audiobook speed. Normal—Fast—Slow NOTE The audiobook speed icon may not change depending on the connected iPod/ iPhone. Sets a repeat play range for all in the selected list/the current song. Plays songs within the selected list/album randomly. Apple Music® Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: https://www.apple.
Apple Music Radio screen English Switches between playback and pause. Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. • Touch [Add to iTunes Wish List] to add the current song to the iTunes wish list. NOTE This function may not be used depending on your Apple Music account status. Skips tracks forwards.
WebLink™ NOTES • The supported finger gestures may vary depending on the WebLink compatible application. • To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/ • Be sure to read Using app-based connected content (page 170) before you perform this operation. • Copyright protected files such as DRM cannot be played.
WebLink English Displays the main menu of the WebLink source screen. For iPhone users 1 2 3 4 5 Connect your iPhone to this product via USB. Refer to the Installation Manual. Press . Touch . Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. For smartphone (Android) users NOTE The video playback capability depends on the connected Android device. 1 2 3 4 5 Unlock your smartphone and connect it to this product via USB. Refer to the Installation Manual. Press . Touch .
Using the audio mix function You can output the audio mixing AV source and an application for iPhone or smartphone when WebLink is used. NOTE Depending on the application or AV source, this function may not be available. Start up the WebLink. Press VOL (+/-). The audio mix menu will be displayed on the screen. Android iOS Touch to mute. Touch again to cancel mute. Sets whether to switch the sound mix function on or off.
Apple CarPlay You can operate iPhone applications with finger gestures such as tapping, dragging, scrolling, or flicking on the screen of this product. NOTE The compatible finger gestures vary depending on the application for the iPhone. WARNING Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. English Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure When connecting an iPhone to this product, settings are required according to the connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 74). Wired connection 1 2 3 4 5 Connect an Apple CarPlay compatible device to this product via USB. Press . Touch . Touch [Apple CarPlay].
The unit configures the connection then start the application. TIP You can also start Apple CarPlay with a desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. TIP You can use Siri function by pressing once Apple CarPlay is activated. Adjusting the volume You can adjust the guidance volume separately from the main sound volume when Apple CarPlay is used. 1 While Apple CarPlay is activated, press VOL (+/-).
Android Auto™ Z930DAB Z830DAB Compatible Android devices For details about compatibility of Android models, refer to the following website. https://support.google.com/androidauto NOTE The compatible finger gestures vary depending on the application for the smartphone. WARNING Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked.
3 4 Touch [Smartphone-related Settings]. English Touch [Driving Position]. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure When connecting a smartphone to this product, settings are required according to the connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 74). Wired connection 1 2 3 4 5 Connect an Android Auto™ compatible device to this product via USB. Press . Touch . Touch [Android Auto].
5 Touch a desired device on the screen. The unit configures the connection then start the application. TIP You can use voice recognition function by pressing once Android Auto is activated. Adjusting the volume You can adjust the guidance volume separately from the main sound volume when Android Auto is used. 1 While Android Auto is activated, press VOL (+/-). The volume menu will be displayed on the screen. Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume.
NOTE Android Auto will launch automatically only when an Android Auto compatible device is correctly connected to this product. Press Touch . then . Touch [Smartphone-related Settings]. Touch [Android Auto Auto-launch] to switch [On] or [Off].
HDMI Z930DAB NOTE A High Speed HDMI® Cable (sold separately) is required for connection. For details, refer to the Installation Manual. Starting procedure 1 2 Press then touch . Touch [HDMI]. The HDMI source screen appears. Basic operation HDMI source screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 144).
AUX You can display the video image output by the device connected to video input. NOTES • A Mini-jack AV cable (sold separately) is required for connection. For details, refer to the Installation Manual. • You can set the screen size for the video image (page 144). Starting procedure 1 2 3 4 5 6 Press Touch . then . Touch [Input/Output Settings]. Confirm that [AUX Input] is turned on. Press then touch . Touch [AUX]. The AUX screen appears.
Basic operation AUX screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen. TIP You can set the screen size for the video image (page 144). Switches between the video input and audio input.
AV input You can display the video image output by the device connected or the camera to video input. For details, refer to the Installation Manual. Starting procedure 1 2 3 4 5 6 7 Press Touch . then . Touch [Input/Output Settings]. Touch [AV Input]. Touch [Source] for AV source or [Camera] for camera. Press then touch . Touch [AV] for AV source or [Camera View] for camera. The image is displayed on the screen.
Basic operation AV source screen English Hides the touch panel keys. To display the keys again, touch anywhere on the screen.
Wireless Mirroring Starting procedure Wireless Mirroring operations and procedures vary depending on the connected mobile device. Refer to the instruction manual that came with your mobile device. CAUTION For safety reasons, this function is available only when you stop your vehicle in a safe place and apply the handbrake. 1 2 3 4 5 6 7 8 Press Touch . then . Touch [Wi-Fi Settings]. Confirm that [Wi-Fi] is turned on. Press then touch . Touch [Mirroring].
Basic operation Wireless Mirroring screen (Example) English Displays Full screen. [Disconnect] Disconnects Wireless Mirroring. NOTES • The screen shown in the example may differ from the connected mobile device. • If the Android device is not ready for Miracast UIBC, you cannot perform touch operation.
Vehicle equipment information Z830DAB English Z930DAB Z730DAB Z7330DAB Using the Vehicle Bus adapter By connecting the optional Vehicle Bus adapter, you can display the operation status of the vehicle’s parking sensor function and climate control panel on the screen. Important • For information on installing the Vehicle Bus adapter, see the operating manual of the Vehicle Bus adapter. • After installing the Vehicle Bus adapter, be sure to check operations.
A/C Control screen English Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTES • This function is only available for vehicles equipped with a parking sensor system. • The Parking Assist screen is not displayed until this product boots up completely.
Settings You can adjust various settings in the main menu. 1 2 3 Press Touch . . Touch one of the following categories, then select the options. System settings (page 120) Theme settings (page 130) Audio settings (page 133) Video settings (page 139) Bluetooth settings (page 61) System settings The menu items vary according to the source.
* AVIC-Z930DAB/AVIC-Z830DAB/AVIC-Z730DAB/AVIC-Z7330DAB [Smartphone-related Settings] Description [Smartphone Setup] Setting the connected mobile device (page 74). [Driving Position] [Right] [Left] Setting the driving position. • Apple CarPlay (page 104) • Android Auto™ (page 107) [Android Auto Autolaunch]* [On] [Off] Select [On] to automatically launch Android Auto when an Android device is connected to the unit.
▶Camera for Camera View mode Camera View can be displayed at all times. Note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. To display the camera image, touch [Camera View] on the AV source selection screen (page 72). CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
Menu Item [Ground] Description The polarity of the connected lead is negative. NOTE If the camera polarity setting is wrong, or wrong camera setting is made, press and hold to release the rear view camera screen and then change the camera polarity setting to [Battery]. You can set whether to display the parking assist guidelines on the rear view camera images when backing up your vehicle. [Parking Assist Guide Adjust]* Adjusting the guidelines by dragging or touching / / / on the screen.
[Wi-Fi Settings] Menu Item Description [Wi-Fi Settings] (page 69) Menu Item Description [Safe Mode] [On] [Off] Set the safe mode that regulate operating some functions only when you stop your vehicle in a safe place and apply the handbrake. [Demo Mode] Menu Item Description [Demo Mode] [On] [Off] Setting the demo mode. [System Language] Menu Item Description [System Language] Select the system language.
CAUTION Do not turn off the engine while restoring the settings. NOTE This setting is available only when you stop your vehicle in a safe place and apply the handbrake. Description [All Settings] Almost all settings or recorded content returns to the default. [Audio Settings] Restore to default Audio settings. NOTE This setting is available when the source is turned off. [Theme Settings] Restore to default Theme settings. [Bluetooth Settings] Restore to default Bluetooth settings.
Description [Touch Panel Calibration] 1 Touch two corners of the screen along the arrows then touch the centres of the two [+] marks at the same time twice. 2 Press . The adjustment results are saved. 3 Press once again. Proceed to 16-point adjustment. 4 Gently touch the centre of the [+] mark displayed on the screen. The target indicates the order. • When you press , the previous adjustment position returns. • When you press and hold , the adjustment is cancelled. 5 Press and hold .
Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching or . You can use this function when [Dimmer Trigger] is set to [Time]. NOTE The time display of the dimmer duration adjusting bar depends on the clock display setting (page 144). [Picture Adjustment] You can adjust the picture for each source and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion.
* With some pictures, you cannot adjust [Hue] and [Colour]. [System Information] Menu Item [Firmware Information] Description Displays the firmware version. TIP You can also check the open source licence of the functions that this product is equipped with by touching [Licence] in this menu. - 128 - English NOTES • When you touch [Rear View] or [2nd Camera], the mode changes to the selected camera mode. By touching [Source], [NAV], or [Apps], you can return to the selected mode.
Menu Item [Firmware Update] Description CAUTION 1 Download the firmware update files into your computer. 2 Connect a blank (formatted) storage device to your computer then locate the correct update file and copy it onto the USB storage device. 3 Set the external storage device to this product (page 90). 4 Turn the source off (page 72). 5 Display the [System] setting screen (page 120). 6 Touch [System Information]. 7 Touch [Firmware Update]. 8 Touch [Continue].
Menu Item Description [Connection Status] Check that the leads are properly connected between this product and vehicle. [GPS Antenna] Displays the connection status of the GPS aerial ([OK] or [NOK]) and the reception sensitivity. [Positioning Status] Displays the positioning status (3D positioning, 2D positioning, or no positioning), the number of satellites used for positioning (orange), and the number of satellites that have received signals (yellow).
Menu Item Description [Background] [Home] [AV] Select the wall paper from the preset items in this product or original pictures via the external device such as USB storage device and SD memory card. Preset Display (custom)* Selects the desired preset background display. Displays the background display image imported from the external storage device. To set the image from an external device, touch then select the desired image by touching the desired external storage device after connecting the device.
Menu Item Description [Splash Screen] Select the splash screen from the preinstalled image in this product or external devices such as USB storage devices and SD memory cards. Preset Images Selects the desired preset splash screen image. Displays the splash screen image imported from the external storage device. To set the image from an external device, touch then select the desired image by touching the desired external storage device after connecting the device.
6 [Splash Screen] [Select All] Touch [Export]. ▶Importing Theme settings 2 Set the external storage device (page 89). A message confirming whether to import the stored setting data appears. Touch [Import]. Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute or the source is off.
Menu Item [ATT] Description The volume becomes 20 dB lower than the current volume. [Mute] The volume becomes 0. [Off] The volume does not change. Adjust the volume level of each source to prevent radical changes in volume when switching between sources other than FM. Touch or to adjust the source volume after comparing the FM tuner volume level with the level of the source.
Description [Listening Position]*1 [Off] [Front Left] [Front Right] [Front] [All] Select a listening position that you want to make as the centre of sound effects.
Description [Rear Speaker Output] [Rear] [Subwoofer] Select the rear speaker output. [Loudness] [Off] [Low] [Mid] [High] Compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. NOTES • This function is available when [Standard Mode] is selected as the speaker mode. • If [Subwoofer] is selected, the rear speaker adjustment is not available in [Speaker Level], [Time Alignment] and [Crossover].
CAUTION ▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or mobile phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics. • Be sure to use the microphone for acoustical measurement (sold separately). Using other microphones may prevent measurement, or result in incorrect measurement of the vehicle’s acoustics.
1 Stop the vehicle in a quiet place, close all doors, windows, and sun roof, and then turn the engine off. If the engine is left running, engine noise may prevent correct Auto EQ. NOTE If driving restrictions are detected during measurement, the measurement is cancelled. 2 5 6 7 8 9 Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 72). Press Touch . then . Touch [A-EQ&TA Measurement].
When Auto EQ is completed, a message is displayed. NOTE The measurement time varies depending on the type of vehicle. TIP To stop the measurement, touch [Stop]. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, colour change, or malfunction. Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer.
Description [Subtitle Language]*1*2 Set a subtitle language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Audio Language]*1*2 Set an audio language preference. When you select [Others], a language code input screen is shown. Input the four-digit code of the desired language then touch . [Menu Language]*1*2 Set a menu language preference. When you select [Others], a language code input screen is shown.
Description [Parental] Set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. 1 Touch [0] to [9] to input a four-digit code number. 2 Touch . Registers the code number, and you can now set the level. 3 Touch any number between [1] to [8] to select the desired level. The lower the level is set, the tighter the restriction is applied. 4 Touch . Sets the parental lock level.
Menu Item Description [DVD Auto Play] [On] [Off] Set to display the DVD menu automatically and start playback from the first chapter of the first title when a DVD disc with a DVD menu is inserted. *1 You can switch the language by touching the switch languages key during playback. *2 The setting made here will not be affected even if the language is switched during playback using the appropriate key.
Favourite menu Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. Creating a shortcut 1 2 Press then touch . Touch the star icon of the menu item. The star icon for the selected menu is filled in. TIP To cancel the registration, touch the star icon in the menu column again. Selecting a shortcut 1 2 3 Press then touch Touch . . Touch the menu item.
Other functions Setting the time and date Touch the current time on the screen. Touch one of the items to adjust. • You can change the time display format to [12hour] or [24hour]. • You can change the order of date display format: Day-month, Month-day. Changing the wide screen mode You can set the screen mode for AV screen and image files. 1 Touch the screen display mode key. Screen display mode key 2 Touch the desired mode.
TIPS • Different settings can be stored for each video source. • When a video is viewed in wide screen mode that does not match its original aspect ratio, it may appear different. • The video image will appear coarser when viewed in [Zoom] mode. Selecting the video for the rear display You can choose either to show the same image as the front screen or to show the selected source on the rear display.
[Source OFF] Nothing is output to the rear display. * AVIC-Z930DAB/AVIC-Z830DAB Setting the anti-theft function Important If you forgot your password, contact the nearest authorised Pioneer Service Station. Setting the password 1 2 3 Press 4 5 Touch [Set Password]. 6 7 8 9 Touch . then . Touch 1, followed by 2, and then touch 3. Enter the password. 5 to 16 characters can be entered for a password. Touch [Go]. Enter a password hint. Up to 40 characters can be entered for a hint. Touch [Go].
Deleting the password The current password and password hint can be deleted. 1 Press . Touch then . Touch 1, followed by 2, and then touch 3 (page 146). Touch [Clear Password]. Touch [Yes]. Touch [OK]. Enter the current password. Touch [Go]. A message indicating that the security setting is cancelled appears. Restoring this product to the default settings You can restore settings or recorded content to the default settings from [Restore Settings] in the [System] menu (page 124).
Appendix If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer service facility. Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. – Press any button on this product to release the mode.
The picture stops (pauses) and this product cannot be operated. → The reading of data is impossible during disc playback. – Stop playback once, then restart. The picture is stretched, with an incorrect aspect ratio. → The aspect setting is incorrect for the display. – Select the appropriate setting for that image. A parental lock message is displayed and DVD playback is not possible. → The parental lock is on. – Turn the parental lock off or change the level.
occurs when the reverse gear polarity setting of this product is incorrect. – Check the polarity and re-select the correct setting. Problems with Application screen The screen is displayed, but operation does not work at all. → An error has occurred. – Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again.
problem, contact your dealer or an authorised Pioneer Station for assistance. No GPS antenna. Check connection. → GPS reception is lost. – Check the aerial connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorised Pioneer Station for assistance. GPS antenna problem detected. Contact dealer or service center. → GPS aerial lead is short-circuited. – Contact your dealer or an authorised Pioneer Station for assistance.
Unplayable Disc → This type of disc cannot be played on this product. – Replace the disc with one that can be played on this product. – Select a file that can be played. Audio Format not supported → This type of file is not supported on this product. – Select a file that can be played. External storage device (USB, SD) SD function is only available for AVICZ930DAB/AVIC-Z830DAB. Skipped → The inserted disc contains DRM protected files. – The protected files are skipped.
Incompatible USB → The connected USB storage device is not supported by this product. – Disconnect your device and replace it with a compatible USB storage device. Check USB → The USB connector or USB cable has short-circuited. – Check that the USB connector or USB cable is not caught in something or damaged. → The connected USB storage device consumes more than maximum allowable current. – Disconnect the USB storage device and do not use it.
Error-10 → The power failed for the Bluetooth module of this product. – Turn the ignition switch to OFF and then to ON. If the error message is still displayed after performing the above action, please contact your dealer or an authorised Pioneer Service Station. Apple CarPlay Attempting to connect to Apple CarPlay. → Communication failed and the system is trying to connect. → Wait for a while. Then, perform the actions below if the error message is still displayed. – Restart the iPhone.
Positioning by dead reckoning The built-in sensor in the navigation system also calculates your position. The current location is measured by detecting driving distance with the speed pulse, the turning direction with the gyro sensor and inclination of the road with the G sensor. The built-in sensor can even calculate changes of altitude, and correct the discrepancies in the distance travelled caused by driving along winding roads or up slopes.
With map matching In this case, it is impossible for the system to use GPS positioning. In tunnels or enclosed parking garages English Under elevated roads or similar structures Without map matching When driving among high buildings Handling large errors Positioning errors are kept to a minimum by combining GPS, dead reckoning and map matching. However, in some situations, these functions may not work properly, and the error may become bigger.
• Do not cover the GPS aerial with spray paint or car wax, because this may block the reception of GPS signals. Snow buildup can also degrade the signals, so keep the aerial clear. If there is another road very nearby, such as in the case of an elevated motorway.
If the road has a series of hairpin bends. If you are driving on a long, straight road or a gently curving road. English If there is a loop or similar road configuration. If you are on a steep mountain road with many height changes. If you enter or exit a multi-storey car park or similar structure using a spiral ramp. If you take a ferry.
If your vehicle is turned on a turntable or similar structure. If trees or other obstacles block the GPS signals for a considerable period. English If you drive very slowly, or in a startand-stop manner, as in a traffic jam. If your vehicle’s wheels spin, such as on a rough track or in snow. If you join the road after driving around a large car park. If you put on chains, or change your tyres for ones with a different size.
When you drive around a roundabout. Route setting information Route search specifications Your navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some useful information about how a route is set. CAUTION When a route is calculated, the route and voice guidance for the route are automatically set.
Auto reroute function • If you deviate from the set route, the system will re-calculate the route from that point so that you remain on track to the destination. • This function may not work under certain conditions. Handling and care of discs Some basic precautions are necessary when handling your discs. Built-in drive and care • Use only conventional, fully circular discs. Do not use shaped discs. • Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the built-in drive.
CD This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Definition) format. Do not insert in AVCHD discs. If inserted, the disc may not be ejected. Compatibility Playing DualDisc • DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other. • Playback of the DVD side is possible with this product.
Common notes about the external storage device (USB, SD) SD function is only available for AVICZ930DAB/AVIC-Z830DAB. • Do not leave the external storage device (USB, SD) storage device in any location with high temperatures. • Depending on the kind of the external storage device (USB, SD) storage device you use, this product may not recognise the storage device or files may not be played back properly. • The text information of some audio and video files may not be correctly displayed.
Common notes about DivX files • Only DivX files downloaded from DivX partner sites are guaranteed for proper operation. Unauthorised DivX files may not operate properly. • DRM rental files cannot be operated until playing back is started. • This product corresponds to a DivX file display of up to 1 590 minutes 43 seconds. Search operations beyond this time limit are prohibited. • DivX VOD file playback requires supplying the ID code of this product to the DivX VOD provider.
CD-R/-RW CODEC FORMAT FILE SYSTEM MAX. DIRECTORY MAX. FOLDER No. MAX. FILE No. MP3, WMA, AAC, DivX, MPEG1, MPEG2, MPEG4 ISO 9660 level 1, level 2, Romeo Joliet No limit 700 999 DVD-R/-R SL/-R DL/DVD-RW CODEC FORMAT FILE SYSTEM MAX. FOLDER No. MAX. FILE No. MP3, WMA, AAC, MPEG2, MPEG4 ISO 9660 level 1, level 2, Romeo Joliet 700 3 500 USB storage device/SD memory card CODEC FORMAT FILE SYSTEM MAX. DIRECTORY MAX. FOLDER No. MAX. FILE No. MP3, WMA, AAC, WAV, FLAC, H.
WMA compatibility • This product is not compatible with the following: Windows Media™ Audio 9 Professional, Lossless, Voice SAMPLING FREQUENCY WAV compatibility • The sampling frequency shown in the display may be rounded. • WAV files on the CD-R/-RW, DVD-R/-RW/R SL/-R DL cannot be played.
.3gp Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, H.263 1 920 x 1 080 30 fps Compatible video codec Maximum resolution Maximum frame rate MPEG4, H.264, Xvid 1 920 x 1 080 30 fps The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners. Wi-Fi .
WMA/WMV Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. FLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
• Firmly secure the iPod when driving. Do not let the iPod fall onto the floor, where it may become jammed under the brake or accelerator. • For details, refer to the iPod manuals. WebLink WebLink is a trademark of Abalta Technologies, Inc. iPhone, iPod and Lightning Waze and Waze logo are registered trademarks of Google LLC.
Apple Music is a trademark of Apple Inc., registered in the U.S. and other countries. Apple CarPlay Apple CarPlay is a trademark of Apple Inc. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Siri Works with Siri through the microphone.
• WebLink, Apple CarPlay and Android Auto allow access to applications other than those listed (subject to limitations while driving), but the extent to which content can be used is determined by the App providers. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Liquid crystal display (LCD) screen • If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside this product, resulting in possible damage. • Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a malfunction.
Navigation GPS receiver: System: GPS L1C/Ac, SBAS L1C/A, GLONASS L1OF SPS (Standard Positioning Service) Reception system: 72-channel multi-channel reception system Reception frequency: 1 575.42 MHz/1 602 MHz Sensitivity: -140 dBm (typ) Position update frequency: Approx. once per second GPS aerial: Aerial: Micro strip flat aerial/right-handed helical polarization Aerial cable: 3.55 m Dimensions (W × H × D): 33 mm × 14.7 mm × 36 mm Weight: 73.
LPF (Mid): Frequency: 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15 kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ 12.5 kHz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, OFF Subwoofer: Frequency: 25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz/250 Hz Slope: -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 dB/oct, -30 dB/oct, -36 dB/oct, OFF Gain: +10 dB to -24 dB (1 dB/step) Phase: Normal/Reverse Time alignment: 0 to 140 step (2.
WMA decoding format: Ver. 7, 8, 9 (2 ch audio) (Windows Media Player) AAC decoding format: MPEG-4 AAC (iTunes encoded only): .m4a (Ver. 11 and earlier) DivX decoding format: Home Theater Ver. 3.11, 4.x, 5.x, 6.x: .avi, .divx MPEG video decoding format: MPEG1: .mpg, .mpeg, .dat MPEG-2 PS: .mpg, .mpeg MPEG4 part 2 (visual), MS-MPEG4 Ver. 3: .avi JPEG decoding format: JPEG SD (AVIC-Z930DAB/AVIC-Z830DAB) Compatible physical format: Version 2.0 File system: FAT16, FAT32, NTFS USB USB standard spec: USB 1.
Bluetooth Version: Bluetooth 4.1 Output power: +4 dBm Max. (Power class 2) Frequency band: 2 400 MHz to 2 483.5 MHz NOTE Specifications and design are subject to possible modifications without notice due to improvements. FM tuner Frequency range: 87.5 MHz to 108 MHz Usable sensitivity: 12 dBf (1.
https://www.pioneer-car.eu/eur/ Visit www.pioneer-car.eu/uk/ (or www.pioneer-car.eu/eur/) to register your product. Visitez www.pioneer-car.eu/fr/fr (ou www.pioneer-car.eu/eur/) pour enregistrer votre appareil. Si prega di visitare iI sito www.pioneer-car.eu/it/it (o www.pioneer-car.eu/eur/) per registrare iI prodotto. Visite www.pioneer-car.eu/es/es (o www.pioneer-car.eu/eur/) para registrar su producto. Zum Registrieren Ihres Produktes besuchen Sie bitte www.pioneer-car.eu/de/de (oder www.pioneer-car.
